RSS-Feed abonnieren
![](/products/assets/desktop/img/oa-logo.png)
DOI: 10.1055/s-0039-1700768
Influence of Different Pigment Incorporation Methods on Color, Dimensional Stability, and Detail Reproduction of Silicones
Publikationsverlauf
Publikationsdatum:
03. Dezember 2019 (online)
![](https://www.thieme-connect.de/media/10.1055-s-00042133/201903/lookinside/thumbnails/10-1055-s-0039-1700768_00093-1.jpg)
Abstract
Objective To analyze the influence of three pigment incorporation methods on color change, dimensional stability, and detail reproduction of the MDX4–4210 and A-2186 silicones.
Materials and Methods The A-2186 and MDX4–4210 silicones were used for preparation of samples, with the incorporation of bronze, black and pink pigments, usingconventional, mechanical, and industrial incorporation methods. Samples were submitted to the initial readings of color (n = 10; 22-mm diameter × 2-mm thickness), detail reproduction, and dimensional stability (n = 10; 30-mm diameter × 3-mm thickness). Readings were also taken at the end of 252, 504 and 1,008 hours of aging cycles.
Results Quantitative data were evaluated by ANOVA and Tukey test, with a level of significance of 5%. The mechanical and industrial methods caused smaller color changes of all samples compared with the conventional method (p < 0.05). In most cases, the mechanical and industrial methods caused less samples’ contraction than the conventional method after aging (p < 0.05). The color change values increased progressively in each aging period for all samples (p < 0.05). The contraction values increased progressively in each aging period for all samples (p < 0.05). In the qualitative analysis of detail reproduction, all samples presented full reproduction of the three grooves, with accurate angles, initially and after the aging periods.
Conclusions The industrial and mechanical methods showed the best results for color and dimensional stability. Despite the statistical differences, all pigment incorporation methods generated acceptable dimensional and color changes of the MDX4-4210 and A-2186 silicones, regardless of the pigment and aging. In addition, the detail reproduction was satisfactory after aging periods in all cases of this study, showing the excellent quality of the A-2186 and MDX4–4210 silicones.
-
References
- 1 Rai SY, Guttal SS. Effect of intrinsic pigmentation on the tear strength and water sorption of two commercially available silicone elastomers. J Indian Prosthodont Soc 2013; 13 (01) 30-35
- 2 Haddad MF, Goiato MC, Dos Santos DM, Pesqueira AA, Moreno A, Pellizzer EP. Influence of pigment and opacifier on dimensional stability and detail reproduction of maxillofacial silicone elastomer. J Craniofac Surg 2011; 22 (05) 1612-1616
- 3 Cevik P, Yildirim-Bicer AZ. Effect of different types of disinfection solution and aging on the hardness and colour stability of maxillofacial silicone elastomers. Int J Artif Organs 2017; DOI: 10.5301/ijao.5000659.
- 4 Cevik P, Eraslan O. Effects of the addition of titanium dioxide and silaned silica nanoparticles on the mechanical properties of maxillofacial silicones. J Prosthodont 2017; 26 (07) 611-615
- 5 Nguyen CT, Chambers MS, Powers JM. Kiat-Amnuay S. Effect of opacifiers and UV absorbers on pigmented maxillofacial silicone elastomer, part 2: mechanical properties after artificial aging. J Prosthet Dent 2013; 109 (06) 402-410
- 6 dos Santos DM, Goiato MC, Moreno A, Pesqueira AA, Haddad MF. Influence of pigments and opacifiers on color stability of an artificially aged facial silicone. J Prosthodont 2011; 20 (03) 205-208
- 7 Goiato MC, Haddad MF, Sinhoreti MA, dos Santos DM, Pesqueira AA, Moreno A. Influence of opacifiers on dimensional stability and detail reproduction of maxillofacial silicone elastomer. Biomed Eng Online 2010; 9: 85
- 8 Goiato MC, Pesqueira AA, dos Santos DM, Antenucci RM, Ribeiro Pdo. Evaluation of dimensional change and detail reproduction in silicones for facial prostheses. Acta Odontol Latinoam 2008; 21 (01) 85-88
- 9 Nobrega AS, Andreotti AM, Moreno A. Sinhoreti MA, Dos Santos DM, Goiato MC. Influence of adding nanoparticles on the hardness, tear strength, and permanent deformation of facial silicone subjected to accelerated aging. J Prosthet Dent 2016; 116 (04) 623-62
- 10 Goiato MC, Haddad MF, Santos DM, Pesqueira AA, Moreno A. Hardness evaluation of prosthetic silicones containing opacifiers following chemical disinfection and accelerated aging. Braz Oral Res 2010; 24 (03) 303-308
- 11 Seçilmiş A, Oztürk AN. Nasal prosthesis rehabilitation after partial rhinectomy: a clinical report. Eur J Dent 2007; 1 (02) 115-118
- 12 Han Y, Powers JM, Kiat-Amnuay S. Effect of opacifiers and UV absorbers on pigmented maxillofacial silicone elastomer, part 1: color stability after artificial aging. J Prosthet Dent 2013; 109 (06) 397-401
- 13 dos Santos DM, Goiato MC, Sinhoreti MA, Fernandes AU, Ribeiro Pdo, Dekon SF. Color stability of polymers for facial prosthesis. J Craniofac Surg 2010; 21 (01) 54-58
- 14 Pesqueira AA, Goiato MC, Dos Santos DM, Haddad MF, Moreno A. Effect of disinfection and accelerated ageing on dimensional stability and detail reproduction of a facial silicone with nanoparticles. J Med Eng Technol 2012; 36 (04) 217-221
- 15 Hatamleh MM, Watts DC. Porosity and color of maxillofacial silicone elastomer. J Prosthodont 2011; 20 (01) 60-66
- 16 Lai JH, Hodges JS. Effects of processing parameters on physical properties of the silicone maxillofacial prosthetic materials. Dent Mater 1999; 15 (06) 450-455
- 17 Kiat-Amnuay S, Lemon JC, Powers JM. Effect of opacifiers on color stability of pigmented maxillofacial silicone A-2186 subjected to artificial aging. J Prosthodont 2002; 11 (02) 109-116
- 18 Mancuso DN, Goiato MC, Zuccolotti BC, Moreno A, dos Santos DM, Pesqueira AA. Effect of thermocycling on hardness, absorption, solubility and colour change of soft liners. Gerodontology 2012; 29 (02) e215-e219
- 19 Beltrami R, Ceci M, De Pani G. et al. Effect of different surface finishing/polishing procedures on color stability of esthetic restorative materials: A spectrophotometric evaluation. Eur J Dent 2018; 12 (01) 49-56
- 20 Ceci M, Viola M, Rattalino D, Beltrami R, Colombo M, Poggio C. Discoloration of different esthetic restorative materials: A spectrophotometric evaluation. Eur J Dent 2017; 11 (02) 149-156
- 21 Ergun G, Nagas IC. Color stability of silicone or acrylic denture liners: an in vitro investigation. Eur J Dent 2007; 1 (03) 144-151
- 22 Silva VDD, Dias C, Osório LB, Matje PRB, Menezes LM, Lima EMS. Color changes of esthetic elastomeric ligatures evaluated with the Commission Internationale d’Éclairage color system. Eur J Dent 2018; 12 (03) 428-433
- 23 Imirzalioglu P, Karacaer O, Yilmaz B. Ozmen Msc I. Color stability of denture acrylic resins and a soft lining material against tea, coffee, and nicotine. J Prosthodont 2010; 19 (02) 118-124
- 24 Johnston WM, Kao EC. Assessment of appearance match by visual observation and clinical colorimetry. J Dent Res 1989; 68 (05) 819-822
- 25 Goiato MC, Nóbrega AS, dos Santos DM, Andreotti AM, Moreno A. Effect of different solutions on color stability of acrylic resin-based dentures. Braz Oral Res 2014; 28 (04) 1-7