Synlett 2004(7): 1318-1320  
DOI: 10.1055/s-2004-825598
LETTER
© Georg Thieme Verlag Stuttgart · New York

Pentylpyridinium Tribromide: A Vapor Pressure Free Room Temperature Ionic Liquid Analogue of Bromine

José Salazar*, Romano Dorta*
Departamento de Química, Universidad Simón Bolívar, Caracas 1080A, Venezuela
Fax: +58(212)9063961; e-Mail: jsalazar@usb.ve; e-Mail: rdorta@usb.ve;
Further Information

Publication History

Received 26 February 2004
Publication Date:
10 May 2004 (online)

Abstract

The synthesis and characterization of the room temperature ionic liquid pentylpyridinium tribromide (2) is described. Tribromide 2 was used as a vapor pressure free bromine analogue for the bromination of ketones, aromatics, alkenes, and alkynes. The brominations were carried out in the absence of organic solvents and in most cases the only extraction solvent needed was water. Selectivities and reactivities were shown to be superior to current protocols. The spent reagent pentylpyridinium bromide (1) was easily recycled.

    References

  • 1 Djerassi C. Scholz CR. J. Am. Chem. Soc.  1948,  70:  417 
  • 2 Arcus CL. Strauss HE. J. Chem. Soc.  1952,  2669 
  • 3a Banks RE. Hasszeldine RN. Latham JV. Young IM. J. Chem. Soc.  1965,  594 
  • 3b Reeves WP. Lu CV. Schulmeier B. Jonas L. Hatlevik O. Synth. Commun.  1998,  28:  499 
  • 4 Ali SI. Nikalje MD. Sudalai A. Org. Lett.  1999,  1:  705 
  • 5a Tanaka K. Shiraishi R. Toda F. J. Chem. Soc., Perkin Trans. 1  1999,  3069 . Apart from PHP, ammonium tribromides are widely used brominating agents, see for example:
  • 5b Buckles RE. Popov AI. Zelezny WF. Smith RJ. J. Am. Chem. Soc.  1951,  73:  4525 
  • 5c Avramoff M. Weiss J. Schaechter OJ. J. Org. Chem.  1963,  28:  3256 
  • 5d Kajigaeshi S. Moriwaki M. Tanaka T. Fujisaki S. Kakinami T. Okamoto T. J. Chem. Soc., Perkin Trans. 1  1990,  897 
  • 5e Muathen HA. J. Org. Chem.  1992,  57:  2740 
  • 6 Chiappe C. Capraro D. Conte V. Pieraccini D. Org. Lett.  2001,  3:  1061 
  • 7a Bates ED. Mayton RD. Ntai I. Davis JH. J. Am. Chem. Soc.  2002,  124:  926 
  • 7b Visser AE. Swatloski RP. Reichert WM. Mayton R. Sheff S. Wierzbicki A. Davis JH. Rogers RD. Chem. Commun.  2001,  135 
  • 7c Bartolini O. Bottai M. Chiappe C. Conte V. Pieraccini D. Green Chem.  2002,  4:  621 
  • 8a For a synthesis of 1, see: Zhu Z. Ching C. Carpenter K. Xu R. Selvaratnam S. Hosmane NS. Maguire JA. Appl. Organomet. Chem.  2003,  17:  346 
  • 8b

    Bromide 1 is a white hygroscopic solid that melts in humid air affording an ‘RTIL’ although, strictly speaking, it is not.

  • 10a Barnes HA. Hutton JF. Walters K. An Introduction to Rheology   Elsevier; Amsterdam, Oxford, New York, Tokyo: 1989. 
  • 10b

    For the sake of comparison, the viscosities of bicycle oil and olive oil at r.t. are approximately 10-2 Pa s and 10-1 Pa s, respectively.

  • Similar examples that demonstrate the complete elimination of residual vapor pressure of strong acids in functional RTIL are:
  • 11a Cole AC. Jensen JL. Ntai I. Tran KLT. Weaver KJ. Forbes DC. Davis JH. J. Am. Chem. Soc.  2002,  124:  5962 
  • 11b Susan MABH. Noda A. Mitsushima S. Watanabe M. Chem. Commun.  2003,  938 
  • Representative Procedures
  • 12a

    p -Bromophenol: To crystalline phenol (1.03 g, 10.9 mmol) was added dropwise 2 (4.04 g, 10.3 mmol) over 20 min. The first few drops of 2 caused the phenol crystals to melt and to form a limpid reaction solution. The resulting orange syrup was left stirring for another 20 min during which time the color changed to yellow. Extraction with Et2O (4 × 20 mL) yielded a colorless oil (1.66 g, 93%) and spectroscopic data corresponded to pure p-bromophenol. The yellowish ionic liquid phase was dried under high vacuum, identified as pure 1 (1 is liquid when moist) [8] by 1H NMR (1.99 g, 8.6 mmol), and reacted with 1 equiv of Br2 to regenerate 2. Note: We do not recommend the use of recycled 2 from monobrominations that could contain traces of HBr in acid-sensitive reactions.

  • 12b

    1,2-Dibromocyclohexane: Tribromide 2 (5.00 g, 12.8 mmol) was added dropwise to neat cyclohexene (1.05 g, 12.8 mmol) over 25 min yielding a viscous orange mixture which was left stirring for 2 h. To the resulting yellow biphasic system (heavy phase: 1,2-dibromocyclohexane) was added water (10 mL) for easier phase separation. The organic product was dried with a small amount of Na2SO4, filtered and left for 5 min under high vacuum to remove traces of bromine leaving a colorless liquid (2.60 g, 84%). Spectroscopic data corresponded to a pure sample of 1,2-dibromocyclohexane.

  • For examples, see:
  • 13a Smith MB. Guo LC. Okey S. Stenzel J. Yanella J. LaChapelle E. Org. Lett.  2002,  4:  2321 
  • 13b Bora U. Bose G. Chaudhuri MK. Dhar SS. Gopinath R. Khan AT. Patel BK. Org. Lett.  2000,  2:  247 
9

Pentylpyridinium Tribromide (2). Bromine (64.48 g, 404.7 mmol) was added over 30 min to solid crushed pentylpyridinium bromide (1, 93.07 g, 404.4 mmol) under mechanical stirring and cooling in a water bath affording a deep red liquid. After stirring for 2 h the liquid was left in vacuo overnight. Yield: 156 g (99%); mp 0 °C; κ = 8.09 mS cm-1; d = 1.79 g cm-3; η35-500 0.038 Pa s (all at 25° C). 1H NMR (CD2Cl2): δ = 0.80-1.00 (m, 3 H), 1.30-1.55 (m, 4 H), 2.00-2.15 (m, 2 H), 4.60-4.75 (m, 2 H), 8.10-8.20 (m, 2 H), 8.50-8.65 (m, 1 H), 8.80-8.95 (m, 2 H). 13C NMR (400.14 MHz, CD2Cl2): δ = 13.62 (s), 22.12 (s), 28.20 (s), 31.33 (s), 63.14 (s), 129.08 (s), 144.42 (s), 145.86 (s). Anal. Calcd for C10H16NBr3: C, 30.80; H, 4.14; N, 3.59. Found: C, 30.95; H, 4.11; N, 3.71.