Subscribe to RSS
Please copy the URL and add it into your RSS Feed Reader.
https://www.thieme-connect.de/rss/thieme/en/10.1055-s-00000083.xml
Synlett 2015; 26(08): 1073-1076
DOI: 10.1055/s-0034-1380380
DOI: 10.1055/s-0034-1380380
letter
Reactive Barium-Promoted Benzylation of Diaryl Azo Compounds
Further Information
Publication History
Received: 22 January 2015
Accepted after revision: 16 February 2015
Publication Date:
18 March 2015 (online)
Abstract
The Barbier-type benzylation of azo compounds with benzylic chlorides was achieved by using reactive barium as the promoter. Various benzylic hydrazines were synthesized from the corresponding benzylic chlorides. The thus-obtained benzylic hydrazines were further efficiently converted into benzylic amines by reductive N–N bond cleavage.
Supporting Information
- Supporting information for this article is available online at http://dx.doi.org/10.1055/s-0034-1380380.
- Supporting Information
-
References and Notes
- 1a Sell MS, Rieke RD. Synth. Commun. 1995; 25: 4107
- 1b Rieke RD, Sell MS, Klein WR, Chen T.-A, Brown JD, Hanson MV In Active Metals. Preparation, Characterization, Applications . Fürstner A. VCH; Weinheim: 1996: 1
- 1c Rieke RD, Hanson MV. Tetrahedron 1997; 53: 1925
- 2a Yanagisawa A, Habaue S, Yamamoto H. J. Am. Chem. Soc. 1991; 113: 8955
- 2b Yanagisawa A, Habaue S, Yasue K, Yamamoto H. J. Am. Chem. Soc. 1994; 116: 6130
- 2c Yanagisawa A, Yamamoto H In Active Metals. Preparation, Characterization, Applications . Fürstner A. VCH; Weinheim: 1996: 61
- 2d Yanagisawa A In Science of Synthesis . Vol. 7. Yamamoto H. Thieme; Stuttgart: 2004: 695
- 2e Yanagisawa A In Main Group Metals in Organic Synthesis . Vol. 1. Yamamoto H, Oshima K. Wiley-VCH; Weinheim: 2004: 175
- 2f Miyoshi N, Kamiura K, Oka H, Kita A, Kuwata R, Ikehara D, Wada M. Bull. Chem. Soc. Jpn. 2004; 77: 341
- 2g Miyoshi N, Ikehara D, Kohno T, Matsui A, Wada M. Chem. Lett. 2005; 34: 760
- 2h Miyoshi N In Science of Synthesis . Vol. 7. Yamamoto H. Thieme; Stuttgart: 2004: 685
- 2i Miyoshi N, Ikehara D, Matsuo T, Kohno T, Matsui A, Wada M. J. Synth. Org. Chem. Jpn. 2006; 64: 845
- 2j Miyoshi N, Asaoka M, Miyazaki Y, Tajima T, Kikuchi M, Wada M. Chem. Lett. 2012; 41: 35
- 3 Yanagisawa A, Koide T, Yoshida K. Synlett 2010; 1515
- 4 Yanagisawa A, Jitsukawa T, Yoshida K. Synlett 2013; 24: 635
- 5a Rogers SL, Friedhoff LT. Dementia 1996; 7: 293
- 5b Shintani EY, Uchida KM. Am. J. Health Syst. Pharm. 1997; 54: 2805
- 5c Nemeth EF, Steffey ME, Fox J. Pediatr. Nephrol. 1996; 10: 275
- 5d Mailland M, Waelchli R, Ruat M, Boddeke HG. W. M, Seuwen K. Endocrinology 1997; 138: 3601
- 6a Arika T, Yokoo M, Hase T, Maeda T, Amemiya K, Yamaguchi H. Antimicrob. Agents Chemother. 1990; 34: 2250
- 6b Maeda T, Takase M, Ishibashi A, Yamamoto T, Sasaki K, Arika T, Yokoo M, Amemiya K. Yakugaku Zasshi 1991; 111: 126
- 7 The major byproducts were dimers of the benzylic chloride and 1,2-diphenylhydrazine.
- 8 Typical Experimental Procedure for the Benzylation: Synthesis of 1,2-Diphenyl-1-(1-phenylethyl)hydrazine (Entry 5 in Table 1, Entry 2 in Table 2, and Entry 1 in Table 3) To a solution of biphenyl (463 mg, 3.0 mmol) in dry THF (7.5 mL) was added freshly cut lithium (21.0 mg, 3.0 mmol). Stirring the mixture at r.t. for 2 h gave the dark-blue lithium biphenylide solution. Anhydrous BaI2 (587 mg, 1.5 mmol) was placed in a separate flask and covered with dry THF (7.5 mL), and the mixture was stirred for 20 min at r.t. To the solution of BaI2 in THF was added at r.t. a solution of lithium biphenylide in THF under an argon stream. The reaction mixture was stirred for 30 min at r.t. and for 10 min at –78 °C. Then, a solution of 1-phenylethyl chloride (0.199 mL, 1.5 mmol) and azobenzene (91 mg, 0.5 mmol) in THF (4 mL) was added to the resulting dark-brown suspension of reactive barium (1.5 mmol) in THF (15 mL) at –78 °C with a syringe pump (6 mL/h). After being stirred for 2 h at this temperature, the mixture was treated with sat. NH4Cl aq (10 mL) at –78 °C, and the aqueous layer was extracted three times with Et2O (10 mL each). The combined organic extracts were washed with Na2S2O3 (10%, w/v) and brine, dried over Na2SO4, and concentrated in vacuo after filtration. The residual crude product was purified by column chromatography on silica gel (hexane–EtOAc, 80:1) to afford the benzylic hydrazine. The chemical yield (79%) was determined by 1H NMR spectroscopy using 1,4-bis(trimethylsilyl)benzene as an internal standard. Spectral Data of the Product 1H NMR (400 MHz, CDCl3): δ = 7.30–7.15 (m, 9 H, ArH), 6.94–6.92 (m, 2 H, ArH), 6.81–6.72 (m, 4 H, ArH), 5.30 (br s, 1 H, NH), 5.28–5.27 (q, 1 H, J = 7.1 Hz, CH), 1.64 (d, 3 H, J = 7.1 Hz, CH). 13C NMR (99.5 MHz, CDCl3): δ = 149.7, 148.8, 140.7, 129.2, 128.4, 127.3, 119.3, 119.2, 114.5, 112.0, 59.9, 18.2. ESI-MS: m/z calcd for [C20H21N2]+: 289.1699[M + H]+; found: 289.1697.
- 9 In the case of a reaction with low yield, a significant amount of an unreacted diaryl azo compound was recovered. In addition to 1,2-diaryldiazenes, we examined DEAD and nitrosobenzene as N-donors; however, the reaction of the first electrophile resulted in a complex mixture, and the second electrophile afforded an almost 1:1 mixture of a hydroxyamino product and aminooxy product.
- 10 For a review of reductive N–N bond cleavage of hydrazines, see: Gilchrist TL. In Comprehensive Organic Synthesis . Vol. 8. Trost BM, Fleming I. Pergamon; Oxford: 1991: 388
- 11 Sapountzis I, Knochel P. Angew. Chem. Int. Ed. 2004; 43: 897
- 12 Zhang Y, Tang Q, Luo M. Org. Biomol. Chem. 2011; 9: 4977
For reviews, see:
For reactions of allylic barium reagents, see:
For reviews, see:
For related strontium reagents, see:
For representative examples, see: