Synlett 2015; 26(11): 1591-1595
DOI: 10.1055/s-0034-1378711
letter
© Georg Thieme Verlag Stuttgart · New York

Exploiting the Reactivity of 1,2-Ketoamides: Enantioselective Synthesis of Functionalized Pyrrolidines and Pyrrolo-1,4-benzodiazepine-2,5-diones

Paola Acosta
a   Facultad de Ciencias Naturales y Exactas Universidad del Valle Cali, Colombia
,
Diana Becerra
b   Aix Marseille Université, CNRS, Centrale Marseille, iSm2 UMR 7313, 13397 Marseille, France   Email: damien.bonne@univ-amu.fr   Email: jean.rodriguez@univ-amu.fr
,
Sébastien Goudedranche
b   Aix Marseille Université, CNRS, Centrale Marseille, iSm2 UMR 7313, 13397 Marseille, France   Email: damien.bonne@univ-amu.fr   Email: jean.rodriguez@univ-amu.fr
,
Jairo Quiroga
a   Facultad de Ciencias Naturales y Exactas Universidad del Valle Cali, Colombia
,
Thierry Constantieux
b   Aix Marseille Université, CNRS, Centrale Marseille, iSm2 UMR 7313, 13397 Marseille, France   Email: damien.bonne@univ-amu.fr   Email: jean.rodriguez@univ-amu.fr
,
Damien Bonne*
b   Aix Marseille Université, CNRS, Centrale Marseille, iSm2 UMR 7313, 13397 Marseille, France   Email: damien.bonne@univ-amu.fr   Email: jean.rodriguez@univ-amu.fr
,
Jean Rodriguez*
b   Aix Marseille Université, CNRS, Centrale Marseille, iSm2 UMR 7313, 13397 Marseille, France   Email: damien.bonne@univ-amu.fr   Email: jean.rodriguez@univ-amu.fr
› Author Affiliations
Further Information

Publication History

Received: 06 March 2015

Accepted after revision: 11 May 2015

Publication Date:
08 June 2015 (online)


Abstract

A new strategy for the synthesis of optically active pyrrolo[1,4]benzodiazepine-2,5-diones has been developed. The approach is based on an initial Michael addition of functionalized 1,2-ketoamides on nitroalkenes, with a reduction–double cyclization sequence leading to the desired substituted benzodiazepine.

Supporting Information

 
  • References and Notes

    • 1a Stereoselective Multiple Bond-Forming Transformations in Organic Synthesis . Rodriguez J, Bonne D. John Wiley & Sons, Inc; Hoboken, NJ: 2015
    • 1b Bonne D, Constantieux T, Coquerel Y, Rodriguez J. Chem. Eur. J. 2013; 19: 2218
    • 1c Green NJ, Sherburn MS. Aust. J. Chem. 2013; 66: 267
    • 1d Menéndez JC. Curr. Org. Chem. 2013; 18: 1919 ; and reviews included in this special issue
    • 1e Coquerel Y, Boddaert T, Presset M, Mailhol D, Rodriguez J In Ideas in Chemistry and Molecular Sciences: Advances in Synthetic Chemistry . Pignataro B. Wiley-VCH; Weinheim, Germany: 2010. Chap. 9, pp. 187-202
    • 2a Bugaut X, Constantieux T, Coquerel Y, Rodriguez J In Multicomponent Reactions in Organic Synthesis . Zhu J, Wang Q, Wang M.-X. Wiley-VCH; Weinheim: 2014. Chap. 5, pp 109-158
    • 2b Bugaut X, Bonne D, Coquerel Y, Rodriguez J, Constantieux T. Curr. Org. Chem. 2013; 1920
    • 2c Bonne D, Coquerel Y, Constantieux T, Rodriguez J. Tetrahedron: Asymmetry 2010; 21: 1085
    • 3a Raimondi W, Bonne D, Rodriguez J. Angew. Chem. Int. Ed. 2012; 51: 40
    • 3b Raimondi W, Bonne D, Rodriguez J. Chem. Commun. 2012; 48: 6763
    • 4a Baslé O, Raimondi W, Sanchez Duque MM, Bonne D, Constantieux T, Rodriguez J. Org. Lett. 2010; 12: 5246
    • 4b Raimondi W, Baslé O, Bonne D, Constantieux T, Rodriguez J. Adv. Synth. Catal. 2012; 354: 563
  • 6 MacQuarrie-Hunter S, Carlier PR. Org. Lett. 2005; 7: 5305
    • 7a Kariyone K, Yazawa H, Kohsaka M. Chem. Pharm. Bull. 1971; 19: 2289
    • 7b Li G.-Y, Li B.-G, Yang T, Yin J.-H, Qi H.-Y, Liu G.-Y, Zhang G.-L. J. Nat. Prod. 2005; 68: 1243
    • 7c Capon RJ, Skene C, Stewart M, Ford J, O’Hair RA. J, Williams L, Lacey E, Gill JH, Heiland K, Friedel T. Org. Biomol. Chem. 2003; 1: 1856
    • 7d Rank C, Phipps RK, Harris P, Frisvad JC, Gotfredsen CH, Larsen TO. Tetrahedron Lett. 2006; 47: 6099
    • 8a Deck P, Pendzialek D, Biel M, Wagner M, Popkirova B, Ludolph B, Kragol G, Kuhlmann J, Giannis A, Waldmann H. Angew. Chem. Int. Ed. 2005; 44: 4975
    • 8b He J, Wijeratne EM. K, Bashyal BP, Zhan J, Seliga CJ, Liu MX, Pierson EE, Pierson LS, VanEtten HD, Gunatilaka AA. L. J. Nat. Prod. 2004; 67: 1985
    • 8c Kamal A, Shankaraiah N, Prabhakar S, Reddy CR, Markandeya N, Reddy KL, Devaiah V. Bioorg. Med. Chem. Lett. 2008; 18: 2434
  • 9 Bouhlal D, Godé P, Goethals G, Massoui M, Villa P, Martin P. Heterocycles 2001; 55: 303
  • 10 Wright WB, Brabander HJ, Greenbatt EN, Day IP, Hardy RA. J. Med. Chem. 1978; 21: 1087
    • 11a McDowell RS, Blackburn BK, Gadek TR, McGee LR, Rawson T, Reynolds ME, Robarge KD, Somers TC, Thorsett ED, Tischler M, Webb RR, Venuti MC. J. Am. Chem. Soc. 1994; 116: 5077
    • 11b Webb RR, Barker PL, Baier M, Reynolds ME, Robarge KD, Blackbum BK, Tischler MH, Weese KJ. Tetrahedron Lett. 1994; 35: 2113
    • 12a Verdié P, Subra G, Feliu L, Sanchez P, Bergé G, Garcin G, Martinez J. J. Comb. Chem. 2007; 9: 254
    • 12b Cabedo N, Pannecoucke X, Quirion J.-C. Eur. J. Org. Chem. 2005; 1590
  • 13 Okino T, Hoashi Y, Furukawa T, Xu X, Takemoto Y. J. Am. Chem. Soc. 2005; 127: 119
  • 14 Xu Y, Matsunaga S, Shibasaki M. Org. Lett. 2010; 12: 3246
  • 15 It is difficult to give a rational answer to this experimental observation and unfortunately no simple mechanism can be proposed to account for partial epimerization of the final products.
  • 16 Synthesis of Michael Adducts 3; General Procedure: 1,2-Ketoamide 1 (0.20 mmol, 1.0 equiv), nitroalkene 2 (0.24 mmol, 1.2 equiv) and catalyst 6 (0.02 mmol, 0.1 equiv) were successively added in a sealed tube with a magnetic stir bar and dissolved in CH2Cl2 (0.5 mL). The reaction was then stirred at r.t. until consumption of starting ketoamide 1 was observed (48–72 h, reaction monitored by TLC). The crude product was purified directly by flash chromatography on silica gel (EtOAc–petroleum ether (PE), 20:80). Methyl 2-[(3R,4R)-3-Ethyl-5-nitro-2-oxo-4-phenylpentanamido]benzoate (3a): By following the general procedure, the reaction between 1a (49.8 mg, 0.20 mmol), β-nitrostyrene 2a (35.8 mg, 0.24 mmol) and catalyst 6 (8.3 mg, 0.02 mmol) afforded 3a (61%) as a white solid; mp 155–156 °C; Rf = 0.3 (PE–EtOAc, 8:2); HPLC (Chiralpak IA; hexane–EtOH, 90:10; flow rate = 1.0 mL/min; λ = 220nm): t R = 10.12 (major), 10.91 (minor) min; ee = 95%. 1H NMR (400 MHz, CDCl3): δ = 12.21 (br s, NH, 1 H), 8.75 (dd, J = 8.4, 0.9 Hz, 1 H), 8.15–8.13 (m, 1 H), 7.68–7.64 (m, 1 H), 7.34 (d, J = 4.3 Hz, 4 H), 7.28–7.23 (m, 2 H), 4.89–4.81 (m, 2 H), 4.29 (td, J = 9.1, 3.9 Hz, 1 H), 4.10–4.06 (m, 1 H), 4.03 (s, 3 H), 1.99–1.86 (m, 2 H), 1.01 (t, J = 7.4 Hz, 3 H). 13C NMR (100 MHz, CDCl3): δ = 199.6 (C), 168.1 (C), 158.3 (C), 139.5 (C), 137.5 (C), 134.6 (CH), 131.4 (CH), 129.0 (CH), 128.2 (CH), 128.1 (CH), 124.1 (CH), 120.4 (C), 116.7 (C), 77.8 (CH2), 52.8 (CH3), 48.0 (CH), 44.5 (CH), 22.2 (CH2), 11.3 (CH3). HRMS (ESI+): m/z calcd for [C21H22N2O6 + H+]: 399.1551; found: 399.1548. Synthesis of Pyrrolidines 4; General Procedure: Michael adduct 3 (0.3 mmol, 1.0 equiv) was dissolved in anhydrous THF (15 mL) and activated zinc powder (2.77 g, 42 mmol, 70.0 equiv) was added followed by acetic acid (15 mL). The mixture was stirred for 2 h at r.t., then the mixture was concentrated and saturated aqueous NaHCO3 solution (15 mL) was added. The aqueous phase was extracted with CH2Cl2 (2 × 20 mL) and the combined organic layers were washed with water (20 mL), dried over sodium sulfate, and concentrated to give the crude product, which was purified by flash chromatography on silica gel (EtOAc–PE, 40:60). Methyl 2-[(2S,3R,4R)-3-Ethyl-4-phenylpyrrolidine-2-carboxamido]benzoate (4a): Yield: 55%; colorless oil; Rf = 0.5 (PE–EtOAc, 3:2); HPLC (Lux-Cellulose-2; heptane–EtOH, 80:20; flow rate = 1.0 mL/min; λ = 254 nm): t R = 6.75 (major), 8.83 (minor) min; ee = 91%. 1H NMR (400 MHz, CDCl3): δ = 12.34 (br s, NH, 1 H), 8.84 (dd, J = 8.5, 1.2 Hz, 1 H), 8.05 (dd, J = 8.0, 1.7 Hz, 1 H), 7.58–7.54 (m, 1 H), 7.30 (t, J = 7.3 Hz, 2 H), 7.25–7.20 (m, 1 H), 7.18–7.14 (m, 2 H), 7.13–7.08 (m, 1 H), 3.93 (s, 3 H), 3.80 (d, J = 3.7 Hz, 1 H), 3.56 (d, J = 2.4 Hz, 1 H), 3.47 (d, J = 5.1 Hz, 2 H), 2.52–2.43 (m, 1 H), 1.32–1.29 (m, 1 H), 1.20–1.11 (m, 1 H), 0.92 (t, J = 7.3 Hz, 3 H). 13C NMR (100 MHz, CDCl3): δ = 175.1 (C), 168.1 (C), 141.0 (C), 139.9 (C), 134.5 (CH), 131.2 (CH), 128.4 (CH), 128.4 (CH), 126.5 (CH), 122.7 (CH), 120.6 (CH), 116.2 (C), 66.3 (CH3), 52.4 (CH), 51.1 (CH), 50.0 (CH2), 47.2 (CH), 21.6 (CH2), 12.5 (CH3). HRMS (ESI+): m/z calcd for [C21H24N2O3 + H+]: 353.1860; found: 353.1862. Synthesis of Pyrrolo[1,4]benzodiazepine-2,5-dione 5; General Procedure: A reaction vessel equipped with a magnetic stir bar was charged with pyrrolidine 4 (0.2 mmol) and ethylene glycol (0.6 mL), and the mixture was subjected to microwave irradiation at 210 °C for 10–20 min. The crude reaction mixture was extracted with CH2Cl2 (2 × 10 mL) and the combined organic layers were washed with water (10 mL), dried over sodium sulfate, and concentrated to give the crude product, which was purified by flash chromatography on silica gel (EtOAc–PE, 40:60). (1R,2R,11aS)-1-Ethyl-2-phenyl-2,3-dihydro-1H-benzo[e]pyrrolo[1,2-a][1,4]diazepine-5,11(10H,11aH)-dione (5a): Yield: 50%; white solid; mp 234 °C; Rf = 0.2 (PE–EtOAc, 6:4); HPLC (Chiralpak AD-H; heptane–EtOH, 80:20; flow rate = 1.0 mL/min; λ = 254 nm): t R = 15.47 (major), 19.39 (minor) min; ee = 86%. 1H NMR (400 MHz, CDCl3): δ = 8.10–8.06 (m, 2 H), 7.56–7.50 (m, 1 H), 7.28–7.26 (m, 1 H), 7.36–7.31 (m, 3 H), 7.24–7.19 (m, 2 H), 7.03 (dd, J = 8.0, 1.1 Hz, 1 H), 4.08 (dd, J = 8.7, 1.4 Hz, 2 H), 3.94 (d, J = 2.4 Hz, 1 H), 3.81–3.73 (m, 1 H), 3.16–3.09 (m, 1 H), 1.23–1.07 (m, 2 H), 0.77 (t, J = 7.4 Hz, 3 H). 13C NMR (100 MHz, CDCl3): δ = 171.0 (C), 165.7 (C), 138.0 (C), 135.1 (C), 132.7 (CH), 131.4 (CH), 128.6 (CH), 127.9 (CH), 126.9 (CH), 126.8 (C), 125.3 (CH), 121.0 (CH), 60.7 (CH), 49.2 (CH2), 45.3 (CH), 44.6 (CH), 20.1 (CH2), 12.3 (CH3). HRMS (ESI+): m/z calcd for [C20H20N2O2 + H+]: 321.1598; found: 321.1596. Other examples of compounds 3, 4 and 5 as well as 1H and 13C NMR spectra and chiral HPLC analyses are available in the Supporting Information.