Synlett 2024; 35(06): 665-671
DOI: 10.1055/a-2212-7627
cluster
Special Issue to Celebrate the Centenary Year of Prof. Har Gobind Khorana

BF3@K10: An Efficient Heterogeneous Montmorillonite Catalyst for the Halogenation of N-Heterocycles

Az-eddine El Mansouri
a   Chemistry Department, University of the Free State, P.O. Box 339, Bloemfontein 9300, South Africa
,
Saida Lachhab
b   Laboratory of Molecular Chemistry, Faculty of Science Semlalia, Cadi Ayyad University, Marrakesh, Morocco
,
Ahmad Mehdi
c   ICGM, ICGM, UMR5253 1919, Route de Mende 34293 Montpellier cedex 5, France
,
Mustapha Ait-Ali
b   Laboratory of Molecular Chemistry, Faculty of Science Semlalia, Cadi Ayyad University, Marrakesh, Morocco
,
Yogesh S. Sanghvi
d   Rasayan Inc., 2802 Crystal Ridge Road, Encinitas, CA 92024-6615, USA
,
M. Zahouily
e   Laboratoire de Matériaux, Catalyse & Valorisation des Ressources Naturelles, URAC 24, Faculté des Sciences et Techniques, Université Hassan II, Casablanca 20650, Morocco
,
Hassan B. Lazrek
b   Laboratory of Molecular Chemistry, Faculty of Science Semlalia, Cadi Ayyad University, Marrakesh, Morocco
› Author Affiliations


Honoring the contributions of the late Har Gobind Khorana in nucleic acid chemistry.

Abstract

Halogenated N-heterocycles are an essential structural building block in medicinal chemistry. Herein, we describe an economical and efficient protocol for the regioselective halogenation of several N-heterocycles (pyrimidines, a pyrazole, 2-aminopyridine, theophylline, and an imidazo[1,2-a]pyridine) with BF3-doped montmorillonite (BF3@K10). The new catalyst was characterized by FTIR and 11B NMR spectroscopy, XRD, SEM, and EDS. The developed strategy provides easy and fast access to iodo-, bromo-, and chloro-N-heterocycles under mild conditions. This method was used to synthesize nine new halogenated pyrimidine derivatives. The reaction is simple and general, affording good to excellent yields of products under conventional heating or microwave conditions in the presence of BF3@K10 as an ecofriendly, inexpensive, and efficient catalyst. This protocol is clearly superior to the conventional route because it offers short reaction times, high yields, and easy workup.

Supporting Information



Publication History

Received: 18 July 2023

Accepted after revision: 16 November 2023

Accepted Manuscript online:
16 November 2023

Article published online:
18 December 2023

© 2023. Thieme. All rights reserved

Georg Thieme Verlag KG
Rüdigerstraße 14, 70469 Stuttgart, Germany

 
  • References and Notes

    • 1a Kate A, Sahu LK, Pandey J, Mishra M, Sharma PK. Curr. Res. Green Sustainable Chem. 2022; 5: 100248
    • 1b Singh H, Rajput JK. Sustainable Catalysis . In Encyclopedia of Physical Organic Chemistry . Wang Z. John Wiley & Sons; Hoboken: 2017: 1-40
    • 2a Varadwaj GB. B, Parida KM. RSC Adv. 2013; 3: 13583
    • 2b Yaghmaeiyan N, Mirzaei M, Delghavi R. Results Chem. 2022; 4: 100549
    • 2c Devaraj Naik B, Udayakumar M. Mat. Today: Proc. 2021; 46: 9855
    • 2d Kaur N, Kishore DJ. Chem. Pharm. Res. 2012; 4: 991
    • 2e Rambabu G, Kiran YB. R, Tarakeswar Y, Khalivulla SI, Barbosa LC. A, Vijayakumar V. Chem. Biodiversity 2022; 19: e202200669
    • 2f Kumar BS, Dhakshinamoorthy A, Pitchumani K. Catal. Sci. Technol. 2014; 4: 2378
    • 2g García-Guzmán P, Medina-Torres L, Bernad-Bernad MJ, Calderas F, Manero O. Mater. Today Commun. 2023; 35: 105604
    • 3a Hechelski M, Ghinet A, Louvel B, Dufrénoy P, Rigo B, Daïch A, Waterlot C. ChemSusChem 2018; 11: 1249
    • 3b Yaghmaeiyan N, Mirzaei M, Bamoniri A. Arabian J. Chem. 2023; 16: 105026
  • 4 Li JT, Xing CY, Li TS. J. Chem. Technol. Biotechnol. 2004; 79: 1275
  • 5 Bordoni C, Cima CM, Azzali E, Costantino G, Brancale A. RSC Adv. 2019; 9: 20113
  • 6 Bamoniri A, Mirjalili BB. F, Moshtael-Arani N. J. Mol. Catal. A: Chem. 2014; 393: 272
  • 7 Mirjalili BB. F, Bamoniri A, Akbari A. Tetrahedron Lett. 2008; 49: 6454
  • 8 Sadeghi B, Mirjalili BB. F, Hashemi MM. Tetrahedron Lett. 2008; 49: 2575
  • 9 Bamoniri A, Yaghmaeiyan N, Sajadi SM. Results Chem. 2023; 5: 100870
  • 10 Taylor, R. 1990.
  • 11 De La Mare P. Electrophilic Halogenation: Reaction Pathways Involving Attack by Electrophilic Halogens on Unsaturated Compounds. Cambridge University Press; Cambridge: 1976
    • 12a Winterton N. Green Chem. 2000; 2: 173
    • 12b Gribble GW. J. Chem. Educ. 2004; 81: 1441
    • 12c Fujimori DG, Walsh CT. Curr. Opin. Chem. Biol. 2007; 11: 553
  • 13 Metal-Catalyzed Cross-Coupling Reactions and More . De Meijere A, Bräse S, Oestreich M. Wiley-VCH; Weinheim: 2013
  • 14 Handbook of Grignard reagents . Silverman GS, Rakita PE. CRC Press; Boca Raton: 1996
  • 15 Asakura J, Robins MJ. J. Org. Chem. 1990; 55: 4928
  • 16 Kumar R, Wiebe LI, Knaus EE. Can. J. Chem. 1994; 72: 2005
  • 17 Kumar V, Yap J, Muroyama A, Malhotra SV. Synthesis 2009; 3957
  • 18 Ganguly NC, De P, Dutta SJ. S. Synthesis 2005; 1103
  • 19 Abdollahi-Alibeik M, Rezaeipoor-Anari A. Catal. Sci. Technol. 2014; 4: 1151
  • 20 Zeynizadeh B, Rahmani S. RSC Adv. 2019; 9: 28038
  • 21 Dharne S, Bokade VV. J. Nat. Gas Chem. 2011; 20: 18
  • 22 Wu H, Xie H, He G, Guan Y, Zhang Y. Appl. Clay Sci. 2016; 119: 161
  • 23 El Mansouri A.-E, Zahouily M, Lazrek HB. Synth. Commun. 2019; 49: 1802
  • 24 El Mansouri A.-E, Maatallah M, Ait Benhassou H, Moumen A, Mehdi A, Snoeck R, Andrei G, Zahouily M, Lazrek HB. Nucleosides, Nucleotides Nucleic Acids 2020; 39: 1088
  • 25 Synthesis of BF3@K10: K10 clay (1.2 g) was dispersed in dichloromethane (10 mL). Subsequently, BF3OEt2 (400 mg) was added dropwise to the mixture at 0 °C under stirring. The mixture was then stirred at room temperature for 1 h, at the end of which the dichloromethane was evaporated under reduced pressure to obtain BF3@K10. Typical procedure for the transformation of 2-((2,4-dioxo-3,4-dihydropyrimidin-1(2H)-yl)methyl)benzonitrile (1b) with conventional heating: A mixture of pyrimidine 1b (0.2 mmol), N-halosuccinimide (0.22 mmol), and BF3@K10 (60 mg) in acetonitrile (3 mL) was heated at 60 °C for 4 h. The mixture was then cooled, the catalyst was recovered by filtration and washed with acetone and dichloromethane, and the filtrate was evaporated under reduced pressure. The residue was purified by column chromatography with a methanol/dichloromethane mixture as the eluent to obtain the corresponding halogenated product 3b. Typical procedure for the transformation of 2-((2,4-dioxo-3,4-dihydropyrimidin-1(2H)-yl)methyl)benzonitrile (1b) with microwave activation: A mixture of pyrimidine 1b (0.2 mmol), N-halosuccinimide (0.22 mmol), and BF3@K10 (60 mg) in acetonitrile (3 mL) was placed in a closed pressure vessel and heated to 100 °C (400 W) for 10 min in a microwave. The mixture was then cooled, the catalyst was recovered by filtration and washed with acetone and dichloromethane, and the filtrate was evaporated under reduced pressure. The residue was purified by column chromatography with a methanol/dichloromethane mixture as the eluent to obtain the corresponding halogenated product 3b: Rf = 0.34 (CH2Cl2/MeOH, 9.9:0.1); mp 235–237 °C. 1H NMR (300 MHz, DMSO-d 6): δ = 5.107 (s, 2 H, CH2), 7.43 (d, 3 J H–H = 7.8 Hz, 1 H, HPh), 7.50 (t, 3 J H–H = 7.8 Hz, 1 H, HPh), 7.83 (t, 3 J H–H = 7.8 Hz, 1 H, HPh), 7.87 (d, 3 J H-H = 7.6 Hz, 1 H, HPh), 8.17 (s, 1 H, H-6), 11.68 (s, 1 H, NH). 13C NMR (75 MHz, DMSO-d 6): δ = 50.53 (CH2), 107.62 (C-5), 111.03 (CPh), 117.59 (CN), 128.51 (CPh), 128.97 (CPh), 133.77 (CPh), 134.04 (CPh), 142.25 (CPh), 143.36 (C-6), 150.66 (C-2), 159.92 (C-4). IR (KBr): 3420 (NH), 3041 (Csp2H), 2829 (Csp3H), 2232 (CN), 1694 (C=O), 1243 (Csp2-Cl) cm–1. HRMS: m/z calcd [M + H]+: 262.0383; found: 262.0391.
  • 26 Prakash GK. S, Mathew T, Hoole D, Esteves PM, Wang Q, Rasul G, Olah GA. J. Am. Chem. Soc. 2004; 126: 15770