CC BY-NC-ND 4.0 · SynOpen 2021; 05(02): 152-157
DOI: 10.1055/s-0040-1706048
paper

Visible-Light-Mediated Photocatalytic Oxidative C–C Bond Cleavage of Geminal Diazides: An Approach to Oxamates

a   Catalysis & Chemical Biology Laboratory, Department of Chemistry, Indian Institute of Technology (IIT) Hyderabad, Kandi, Sangareddy, Telangana 502 285, India
,
a   Catalysis & Chemical Biology Laboratory, Department of Chemistry, Indian Institute of Technology (IIT) Hyderabad, Kandi, Sangareddy, Telangana 502 285, India
,
Sonika Sharma
b   Loyola Academy Degree & P.G College, Old Alwal, Secunderabad, Telangana 500010, India
,
a   Catalysis & Chemical Biology Laboratory, Department of Chemistry, Indian Institute of Technology (IIT) Hyderabad, Kandi, Sangareddy, Telangana 502 285, India
› Author Affiliations
We gratefully acknowledge the Council of Scientific and Industrial Research (02(0297)/17/EMR-II), Government of India and the Indian Institute of Technology Hyderabad (IITH) for financial support. N.R.K. thanks the Indian Institute of Technology Hyderabad (IITH) and the Science and Engineering Research Board, Department of Science and Technology, Ministriy of Science and Technology, India (DST-SERB), and A.V.M thanks the University Grants Committee (UGC) for the award of research rellowships.
 


Dedicated to all covid-19 warriors

Abstract

Photoredox catalysis has received great attention in both academia and industry and remarkable progress has been made over the past decade. Now, it has been shown that a visible-light-mediated oxidative C–C bond cleavage of geminal diazides can be induced by organic dye catalysis for the synthesis of oxamates. A mechanistic study, confirmed by control experiments, indicates that this proceeds through single-electron transfer (SET). This methodology can be applied to convert a wide array of geminal diazides into oxamates.


#

Visible-light photoredox catalysis is a fast-growing research area in recent decades.[1] However, despite the mildness of conditions, the photocatalysts are usually expensive and so organic dyes present an alternative for sustainable photoredox catalysis. Rose bengal is a versatile and inexpensive organic dye, attractive for use in photoredox catalysis,[2] and the use of organic dyes as photocatalysts in organic synthesis has emerged.[3] However, transformations involving C–C bond cleavage remain challenging owing to the high C–C bond-dissociation energy.[4] Despite the stoichiometric reactions of C–C triple-bond cleavage that have been studied thoroughly,[5] catalytic reactions have been rarely achieved except for the metathesis of alkynes. Regardless of the progress in C–C bond cleavages, successful examples are still limited and employ expensive catalysts such as rhodium, ruthenium, and palladium.[6] Therefore, is a demand for exploring new types of C–C bond transformations using organic dyes as catalysts.[7]

Numerous scientific endeavours have been focusing on target methodologies.[8] Among oxidative C–C bond-cleavage procedures with common active oxidants such as hypervalent iodine reagents, organic peroxides are extensively used. Recently, Chen et al. reported metal-free C–C bond cleavage of α-azido ketones leading to the synthesis of α-keto­thioamides and amides.[9]

Recently, a renaissance in photoredox methodology in organic synthesis transformations has been experienced.[10] [11] For instance, oxidative C–C bond cleavage of aldehydes via visible-light photoredox catalysis was reported by Xia et al. However, the need for intense sources of visible light imposes restrictions on the scalability of such photochemical reactions and selectivity remains difficult.[12] Hence, exploration to accomplish C–C bond cleavage of geminal diazides under mild reaction is attractive.

Rose bengal is an organic dye, much employed due to its ability to enable electron-transfer processes in visible-light-mediated photochemical synthetic applications in the formation and cleavage of C–C and C–X bonds.[13] The application of organic dyes to visible-light-induced synthetic transformations is an active field in organic chemistry.[14] Inspired by previous reports,[15] [16] herein, we report a metal-free synthesis of oxamates via oxidative cleavage of geminal diazides in the presence of Rose Bengal and TBHP in decane.

Our initial attempts were directed towards visible-light-mediated C–C bond cleavage of geminal diazide 1a as a model substrate in the presence 4 equiv of aqueous tertiary butyl hydroperoxide (aq TBHP) as the oxidizing agent and 3 mol% Rose Bengal in DMF. The reaction was carried out at room temperature under irradiation with a standard 23 W bulb to afford the desired ethyl 2-oxo-2-(phenylamino) acetate (2aa) with 31% yield (Table [1], entry 1) and, in the presence of H2O2 as the oxidizing agent in MeCN, the yield improved to 58% (Table [1], entry 2). We screened other oxidants (Table [1], entries 3–6) and this resulted in TBHP in decane was found to be a potential oxidant system (84%, Table [1], entry 4). Subsequently, we screened a range of organic dyes and photocatalysts such as Eosin-Y, riboflavin, rhodamine B, Ru(bpy)3Cl2, azure-B, and methylene blue. Among these, Ru(bpy)3Cl2 and Rose Bengal were found to be the most efficient catalysts for C–C bond cleavage (Table [1], entries 4 and 10). Next, the reactions with different amounts of Rose Bengal catalyst were screened (Table [1], entries 12–14), and 0.03 equiv was found to be optimum, furnishing oxamate 2aa in 83% yield with 0.03 equiv of Rose Bengal, 4 equiv of TBHP in decane using a 23 W CFL bulb as light source in MeCN solvent (Table [1], entry 12). The reaction did not proceed in the absence of photocatalyst or visible light, indicating that both components are crucial for this reaction (entries 15, 16). Furthermore, we performed the reaction under sunlight instead of using a 23 W bulb and this gave a 21% of yield (entry 17). We performed the reaction with 11 W and 34 W irradiation, but this did not improve the yield (entries 18, 19). Use of bases such as DIPEA and Cs2CO3 was also not advantageous (entries 20, 21). Among solvents examined in (entries 22–25), MeCN showed that is the most suitable solvent (entry 12) for these conditions.

Table 1 Optimization of Reaction Conditionsa

Entry

Catalyst

Oxidant

Solvent

Yield (%)b

1

Rose Bengal

aq TBHP

DMF

31

2

Rose Bengal

H2O2

MeCN

58

3

Rose Bengal

O2 balloon

MeCN

49

4

Rose Bengal

TBHP in decane

MeCN

84

5

Rose Bengal

DTBP

MeCN

trace

6

Rose Bengal

TBP

MeCN

16

7

Eosin Y

TBHP in decane

MeCN

46

8

riboflavin

TBHP in decane

MeCN

38

9

rhodamine

TBHP in decane

MeCN

41

10

Ru(bpy)3Cl2

TBHP in decane

MeCN

71

11

methylene blue

TBHP in decane

MeCN

68

12

Rose Bengal

TBHP in decane

MeCN

83

13

Rose Bengal

TBHP in decane

MeCN

70

14

azure-B

TBHP in decane

MeCN

66

15

TBHP in decane

MeCN

nd

16

Rose Bengal

TBHP in decane

MeCN

tracec

17

Rose Bengal

TBHP in decane

MeCN

21d

18

Rose Bengal

TBHP in decane

MeCN

68e

19

Rose Bengal

TBHP in decane

MeCN

76f

20

Rose Bengal

TBHP in decane

MeCN

84g

21

Rose Bengal

TBHP in decane

MeCN

83h

22

Rose Bengal

TBHP in decane

DCE

71

23

Rose Bengal

TBHP in decane

DMSO

17

24

Rose Bengal

TBHP in decane

DCM

39

25

Rose Bengal

TBHP in decane

PhMe

46

a Reaction conditions: 1a (1 mmol), solvent (2 mL), room temperature, 23 W visible-light bulb, for 24–48 h.

b Isolated yields.

c Reaction performed in the dark.

d Reaction carried out under sunlight.

e Reaction carried out under 11 W visible-light bulb.

f Reacton carried out under 34 W visible-light bulb.

g DIPEA (1.0 equiv).

h Cs2CO3 (1.0 equiv).

After optimization of the reaction conditions, we investigated the substrate scope of geminal diazides 1 (Scheme [1]). Those with aromatic rings possessing electron-donating groups provided their corresponding oxamate derivatives 2aa, 2ba, 2ca, 2da, and 2ab in good yields. Those with electron-withdrawing groups such as halogen and nitro substituents reacted well, providing the corresponding products 2ae, 2af, 2ag, 2ah, 2ia, 2bb, 2cb, 2ja, and 2db in moderate to good yields. Unfortunately, aliphatic amine-substituted geminal diazides were found to afford the corresponding oxamates in very low yields (2af, 2ag, and 2ah). With a substituent at the β-position of the α,α-diazo β-iminoester such as a Ph, CF3, and Me group under the optimized conditions, this failed to furnish the desired products 2ac, 2ad, and 2ae.

Zoom Image
Scheme 1 Substrate scope with respect to geminal diazides. Reagents and conditions: 1a (1.0 mmol), Rose Bengal (3 mol%), TBHP in decane (4.0 equiv), MeCN (1.5 mL), 23 W CFL lightbulb, rt, for 24–48 h. Isolated yields after silica gel column chromatography.

To gain insight into a possible mechanism of C–C bond cleavage, we performed several control experiments (Scheme [2]). We knew from the optimization studies (Table [1], entries 15, 16) that reaction did not occur in the absence of light and the desired product was not observed in the absence of TBHP in decane (Scheme [2]). In addition, the standard reaction was performed in the presence of TEMPO (2.0 equiv). In this case, we did not detect any radical intermediates.

Zoom Image
Scheme 2 Control experiments

On the basis of the above results, observations and literature reports,[17] [18] [19] a plausible mechanism can be proposed for the C–C bond cleavage of α,α-diazo β-iminoesters to oxamates via visible-light photoredox catalysis as illustrated in Scheme [3]. The photoexcited state Rose Bengal (RB*) can undergo oxidative quenching by the geminal diazide intermediate 1a, resulting in (RB•–) and radical cation II. The Rose Bengal radical anion, upon transfer of an electron to t-BuOOH, provides the tertiary butoxide radical and a hydroxide anion and completes the photoredox cycle by regeneration of Rose Bengal. On the other hand, radical cation II can undergo further fragmentation giving nitrilium ion intermediate III. This intermediate can react with OH to form oxygenated intermediate IV, which would further undergo keto–enol tautomerism to give the desired product 2a.

Zoom Image
Scheme 3Proposed Mechanism

In conclusion, a straightforward strategy for generating oxamates by the C–C bond cleavage of geminal diazides has been developed. The important features of this procedure are mild conditions, high yields, operational simplicity, and atom economy.

General Procedure (GP-I) for the Synthesis of Oxamate Derivatives (2aa–ah)

In a screw-capped vial (Fischer Disposable Borosilicate Glass Tube, tube volume 25 mL), containing 1 (1aaah, 1.0 mmol) and Rose Bengal­ (0.03 equiv), followed by addition of TBHP in decane (4.0 equiv), MeCN (1.5 mL) was added slowly, and the reaction mixture was stirred under visible light (23 W CFL bulb). The progress of the reaction was monitored by TLC until completion (24–48 h). After completion of reaction, the reaction mixture was concentrated in vacuo and purified by column chromatography (silica gel; petroleum ether/ethyl acetate = 9.4:0.6) as eluents to yield the desired oxamates 2aaah.


#

General Procedure (GP-II) for the Synthesis of Geminal Diazides[18]

Compounds 1aaah were prepared according to our recently developed method.[18] The amine (1 mmol) was taken in a dried 10 mL round-bottom flask, and the alkyne (1 mmol) was added slowly in DCE (0.5 mL), and the reaction mixture was stirred (if required) at room temperature for 10 min to 3 h. After the formation of the hydroamination product (confirmed by TLC), DCE (0.25 M, based on hypervalent iodine), tetrabutylammonium bromide (TBAB, 2 mmol) and NaN3 (4 mmol) were added, followed by addition of phenyl iodo(III)diacetate (PIDA, 3 mmol) portion-wise over 30 min. The progress of the reaction was monitored by TLC until the reaction was complete (4–14 h). The reaction mixture was quenched by addition of saturated aqueous NaHCO3, extracted with ethyl acetate, dried over MgSO4, filtered, and concentrated in vacuo. The residue was purified through a silica gel column using petroleum ether/ethyl acetate (9.8:0.2) as eluent.


#

Ethyl 2-Oxo-2-(phenylamino) Acetate (2aa)

Yield 81 mg (84%); white solid; mp 72–73 °C.

IR (MIR-ATR, 4000–600 cm–1): νmax = 3310.26, 2924.82, 1690.15, 1599.09, 1535.45, 1495.52, 1444.16, 1279.76, 1172.21, 1158.45, 1013.90, 754.28, 692.46.

1H NMR (CDCl3, 400 MHz): δ = 8.93 (br s, 1 H), 7.69–7.55 (m, 2 H), 7.41–7.32 (m, 2 H), 7.26–7.12 (m, 1 H), 4.48–4.37 (m, 2 H), 1.42 (t, J = 7.3 Hz, 3 H).

13C NMR (CDCl3, 100 MHz): 161.0, 136.4, 129.2, 125.5, 119.9, 77.4, 77.1, 76.7, 63.7, 14.0.

HRMS (ESI+): m/z calcd for C10H10NaN2O5 [M + Na]+: 261.0825; found: 261.0482.


#

Ethyl 2-Oxo-2-(p-tolylamino) Acetate (2ba)

Yield 61 mg (77%); white solid; mp 69–71 °C.

1H NMR (CDCl3, 400 MHz): δ = 8.85 (br s, 1 H), 7.52 (d, J = 8.3 Hz, 2 H), 7.17 (d, J = 8.3 Hz, 3 H), 4.41 (d, J = 7.3 Hz, 2 H), 2.33 (s, 4 H), 1.42 (t, J = 7.1 Hz, 4 H).

13C NMR (CDCl3, 100 MHz): 161.1, 153.8, 135.3, 133.8, 129.7, 119.8, 77.4, 77.1, 76.7, 63.7, 21.0, 14.0


#

Ethyl 2-[(2-Isopropylphenyl)amino]-2-oxoacetate (2ca)

Yield 70 mg (81%); white solid; mp 111–113 °C.

1H NMR (CDCl3, 400 MHz): δ = 8.95 (br s, 1 H), 7.95 (dd, J = 1.7, 7.6 Hz, 1 H), 7.35–7.15 (m, 3 H), 4.44 (q, J = 7.3 Hz, 2 H), 3.12–2.96 (m, 1 H), 1.45 (t, J = 7.3 Hz, 3 H), 1.31–1.23 (m, 6 H).

13C NMR (CDCl3, 100 MHz): δ = 161.3, 154.2, 139.4, 132.8, 126.7, 126.5, 125.8, 122.8, 77.4, 77.0, 76.7, 63.8, 28.1, 22.9, 14.0.


#

Ethyl 2-[(4-Methoxyphenyl)amino]-2-oxoacetate (2da)

Yield 61 mg (72%); white solid; mp 112–113 °C.

1H NMR (CDCl3, 400 MHz): δ = 8.81 (br s, 1 H), 7.62–7.50 (m, 2 H), 7.01–6.85 (m, 2 H), 4.41 (q, J = 6.8 Hz, 2 H), 3.84–3.77 (m, 3 H), 1.43 (t, J = 7.1 Hz, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 161.2, 157.2, 153.7, 129.5, 121.4, 114.4, 63.7, 55.5, 14.0


#

Ethyl 2-[(2-Fluorophenyl)amino]-2-oxoacetate (2ea)

Yield 79 mg (80%); brown solid; mp 93–95 °C.

1H NMR (CDCl3, 400 MHz): δ = 9.10 (br s, 1 H), 8.44–8.29 (m, 1 H), 7.23–7.09 (m, 3 H), 3.99 (s, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 160.9, 153.6, 151.4, 125.9, 125.9, 124.8, 124.8, 121.5, 115.2, 115.0, 77.3, 77.0, 76.7, 54.1.


#

Ethyl 2-[(4-Chlorophenyl)amino]-2-oxoacetate (2fa)

Yield 64 mg (77%); brown solid; mp 146–148 °C.

1H NMR (CDCl3, 400 MHz): δ = 9.11 (br s, 1 H), 8.36 (s, 1 H), 7.19–7.10 (m, 3 H), 4.46–4.41 (m, 2 H), 1.43 (t, J = 7.1 Hz, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 160.4, 153.9, 151.4, 125.8, 125.7, 124.8, 124.8, 121.4, 115.2, 115.0, 77.4, 77.1, 76.7, 63.8, 14.0, 14.0.


#

Ethyl 2-[(4-Bromophenyl)amino]-2-oxoacetate (2ga)

Yield 66 mg (71%); yellow solid; mp 135–137 °C.

1H NMR (CDCl3, 400 MHz): δ = 8.91 (br s, 1 H), 7.64–7.45 (m, 4 H), 4.48–4.31 (m, 2 H), 1.43 (tt, J = 1.5, 7.1 Hz, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 160.7, 153.9, 137.6, 130.5, 128.6, 122.8, 118.4, 77.4, 77.0, 76.7, 63.9, 14.0.


#

Ethyl 2-[(2-Iodophenyl)amino]-2-oxoacetate (2ha)

Yield 66 mg (69%); brown solid; mp 123–125 °C.

1H NMR (CDCl3, 400 MHz): δ = 9.34 (br s, 1 H), 8.32 (d, J = 6.8 Hz, 1 H), 7.80 (d, J = 6.4 Hz, 1 H), 7.40–7.30 (m, 1 H), 6.93–6.85 (m, 1 H), 4.47–4.35 (m, 3 H), 1.45–1.39 (m, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 160.5, 154.0, 139.1, 137.0, 129.5, 127.0, 121.3, 89.6, 77.4, 77.1, 76.7, 63.9, 14.0.


#

Ethyl 2-[(2,6-Dibromophenyl)amino]-2-oxoacetate (2ia)

Yield 48 mg (69%); yellow solid; mp 113–115 °C.

1H NMR (CDCl3, 400 MHz): δ = 9.47 (br s, 1 H), 8.62 (br s, 1 H), 7.45–7.37 (m, 1 H), 7.19 (d, J = 8.3 Hz, 1 H), 4.50–4.37 (m, 2 H), 1.44 (t, J = 7.1 Hz, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 160.2, 153.9, 135.5, 133.4, 129.3, 124.1, 122.2, 112.2, 77.4, 77.0, 76.7, 64.1, 14.0.


#

Ethyl 2-[(2-Methyl-3-nitrophenyl)amino]-2-oxoacetate(2ja)

Yield 62 mg (73%); yellow solid; mp 111–113 °C.

1H NMR (CDCl3, 400 MHz): δ = 8.97 (br s, 1 H), 8.22 (d, J = 8.3 Hz, 1 H), 7.69 (d, J = 8.3 Hz, 1 H), 7.40 (t, J = 8.1 Hz, 1 H), 4.46 (q, J = 7.3 Hz, 2 H), 2.45 (s, 3 H), 1.45 (t, J = 7.3 Hz, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 160.7, 154.3, 135.9, 127.2, 126.4, 121.5, 77.3, 77.0, 76.7, 64.2, 14.0, 13.3.


#

Ethyl 2-[(2-Bromo-6-methylphenyl)amino]-2-oxoacetate (2ka)

Yield 61 mg (79%); yellow liquid.

1H NMR (CDCl3, 400 MHz): δ = 9.42 (br s, 1 H), 8.27 (d, J = 8.31 Hz, 1 H), 7.33–7.43 (m, 1 H), 7.09–7.18 (m, 1 H), 4.43 (q, J = 6.85 Hz, 2 H), 2.31 (s, 3 H), 1.42–1.49 (m, 2 H).

13C NMR (CDCl3, 100 MHz): δ = 160.5, 153.7, 136.6, 132.8, 132.6, 131.9, 129.2, 129.0, 121.2, 115.8, 113.6, 63.8, 20.7, 20.1, 14.0.


#

Methyl 2-Oxo-2-(phenylamino)acetate (2ab)

Yield 76 mg (78%); white solid; mp 111–113 °C.

1H NMR (CDCl3, 400 MHz): δ = 8.91 (br s, 1 H), 7.88 (d, J = 7.83 Hz, 2 H), 7.40 (t, J = 7.82 Hz, 2 H), 7.21–7.18 (m, 1 H), 3.98 (s, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 161.4, 153.6, 136.2, 129.2, 125.5, 119.9, 54.0.


#

Methyl 2-[(2-Bromorophenyl)amino]-2-oxoacetate (2bb)

Yield 74 mg (78%); white solid; mp 111–112 °C.

1H NMR (CDCl3, 400 MHz): δ = 7.61 (dd, J = 1.2, 8.1 Hz, 1 H), 7.27 (s, 1 H), 7.06 (d, J = 1.5 Hz, 1 H), 6.71 (dd, J = 1.5, 7.8 Hz, 1 H), 4.00–3.93 (m, 3 H), 3.62 (s, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 164.7, 160.3, 155.2, 146.4, 133.1, 127.8, 127.1, 118.6, 113.8, 54.4.


#

Methyl 2-[(2-Iodophenyl)amino]-2-oxoacetate (2cb)

Yield 71 mg (74%); brown solid; mp 116–118 °C.

1H NMR (CDCl3, 400 MHz): δ = 7.61 (dd, J = 1.2, 8.1 Hz, 1 H), 7.27 (s, 1 H), 7.06 (d, J = 1.5 Hz, 1 H), 6.71 (dd, J = 1.5, 7.8 Hz, 1 H), 4.00–3.93 (m, 3 H), 3.62 (s, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 164.7, 160.3, 155.2, 146.4, 133.1, 127.8, 127.1, 118.6, 113.8, 54.4.


#

Methyl 2-[(2-Methyl-3-nitrophenyl)amino]-2-oxoacetate (2db)

Yield 62 mg (75%); yellow solid; mp 126–128 °C.

1H NMR (CDCl3, 400 MHz): δ = 8.94 (br s, 1 H), 8.22 (d, J = 8.3 Hz, 1 H), 7.70 (d, J = 7.8 Hz, 1 H), 7.44–7.37 (m, 1 H), 4.02 (s, 3 H), 2.45 (s, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 161.1, 154.0, 151.2, 135.8, 127.3, 126.5, 124.0, 121.7, 54.4, 13.3.


#

Methyl 2-[(2-Fluorophenyl)amino]-2-oxoacetate (2eb)

Yield 71 mg (79%); white solid; mp 128–131 °C.

1H NMR (CDCl3, 400 MHz): δ = 9.01 (br s, 1 H), 8.39 (t, J = 7.58 Hz, 1 H), 7.14–7.17 (m, 3 H), 3.99 (s, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 161.3, 158.8, 153.6, 132.3, 121.7, 116.1, 54.1.


#

Ethyl 2-(Butylamino)-2-oxoacetate (2af)

Yield 36 mg (36%); brown liquid.

1H NMR (CDCl3, 400 MHz): δ = 7.15 (br s, 1 H), 4.32 (q, J = 7.3 Hz, 3 H), 3.33–3.27 (m, 2 H), 1.54–1.43 (m, 2 H), 1.42–1.30 (m, 7 H), 0.93–0.86 (m, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 160.9, 156.6, 77.4, 77.1, 76.7, 63.1, 39.6, 31.1, 20.0, 14.0, 13.6.


#

Ethyl 2-(Cyclohexylamino)-2-oxoacetate (2ag)

Yield 20 mg (22%); brown liquid.

1H NMR (CDCl3, 400 MHz): δ = 1.16–1.30 (m, 4 H), 1.37–1.41 (m, 3 H), 1.57–1.69 (m, 1 H), 1.74 (dt, J = 13.08, 3.73 Hz, 3 H), 1.91–1.97 (m, 2 H), 3.73–3.86 (m, 1 H), 4.35 (q, J = 7.34 Hz, 2 H), 7.00 (br s, 1 H).

13C NMR (CDCl3, 100 MHz): δ = 14.0, 24.6, 25.3, 32.6, 48.8, 63.2, 155.6, 161.1.


#

Ethyl 2-(tert-Butylamino)-2-oxoacetate (2ah)

Yield 28 mg (31%).

1H NMR (CDCl3, 400 MHz): δ = 7.26 (br s, 1 H), 4.31 (br s, 3 H), 1.40 (br s, 2 H), 1.26 (s, 4 H), 1.30 (s, 3 H).

13C NMR (CDCl3, 100 MHz): δ = 161.3, 155.6, 77.4, 77.1, 76.7, 63.1, 63.1, 51.9, 30.7, 28.2, 28.2, 27.7, 26.4, 14.1, 13.9, 13.8.


#
#

Conflict of Interest

The authors declare no conflict of interest.

Acknowledgment

The authors thank Prof. Ch. Subramanyam, Dr. Piu Chowdary and Ms. Neeraja Sinha Gudipati. N.R.K. Thanks Dr. Sagar Arepally, Dr. Nagarjuna Babu for their kind support and encouragement.

Supporting Information

  • References

  • 1 Sivaguru P, Wang Z, Zanoni G, Bi X. Chem. Soc. Rev. 2019; 48: 2615
  • 2 Adeli Y, Huang K, Liang Y, Jiang Y, Liu J, Song S, Zeng C.-C, Jiao N. ACS Catal. 2019; 9: 2063
    • 3a Long Z, Yang Y, You J. Org. Lett. 2017; 19: 2781
    • 3b Ni J, Jiang Y, An Z, Yan R. Org. Lett. 2018; 20: 1534
    • 3c Prakash R, Bora BR, Boruah RC, Gogoi S. Org. Lett. 2018; 20: 2297
    • 3d Onodera S, Ishikawa S, Kochi T, Kakiuchi F. J. Am. Chem. Soc. 2018; 140: 9788
  • 4 Tobisu M, Chatani N. Chem. Soc. Rev. 2008; 37: 300
  • 5 Moriarty RM, Penmasta R, Awasthi AK, Prakash I. J. Org. Chem. 1988; 53: 6124
    • 6a Shimada T, Yamamoto Y. J. Am. Chem. Soc. 2003; 125: 6646
    • 6b Datta S, Chang C.-L, Yeh K.-L, Liu R.-S. J. Am. Chem. Soc. 2003; 125: 9294
    • 6c Liu Y.-H, Songand F.-J, Guo S.-H. J. Am. Chem. Soc. 2006; 128: 11332
    • 6d Wang A.-Z, Jiang H.-F. J. Am. Chem. Soc. 2008; 130: 5030
    • 6e Liu Q.-L, Chen P.-H, Liu G.-S. ACS Catal. 2013; 3: 178
    • 6f Xie H.-Z, Gao Q, Liang Y, Wang H.-S, Pan Y.-M. Green Chem. 2014; 16: 2132
  • 7 Biallas P, Haring AP, Kirsch SF. Org. Biomol. Chem. 2017; 15: 3184
  • 8 Hypervalent Iodine Chemistry: Modern Developments in Organic Synthesis, Vol. 224. Wirth T. Springer; Berlin: 2003: 1-248
  • 9 Yu P, Wang Y, Zeng Z, Chen Y. J. Org. Chem. 2019; 84: 14883
  • 10 Yu T.-Y, Zheng Z.-J, Dang T.-T, Zhang F.-X, Wei H. J. Org. Chem. 2018; 83: 10589
    • 11a Marzo L, Pagire SK, Reiser O, König B. Angew. Chem. 2018; 130: 10188
    • 11b Pan Y, Kee CW, Chen L, Tan C.-H. Green Chem. 2011; 13: 2682
    • 11c Guo W.-L, Wang L.-Q, Wang Y.-N, Chen J.-R, Xiao W.-J. Angew. Chem. Int. Ed. 2015; 54: 2265 ; Angew. Chem. 2015, 127, 2293
    • 11d Wang L, Cheng P, Wang X, Wang W, Zeng J, Liang Y, Reiser O. Org. Chem. Front. 2019; 6: 3771
    • 11e Murugan A, Babu VN, Polu A, Sabarinathan N, Bakthadoss M, Sharada DS. J. Org. Chem. 2019; 84: 7796
  • 12 Sun H, Yang C, Gao F, Li Z, Xia W. Org. Lett. 2013; 15: 624
  • 13 Sharma S, Sharma A. Org. Biomol. Chem. 2019; 17: 4384
    • 14a Prier CK, Rankic DA, MacMillan DW. C. Chem. Rev. 2013; 113: 5322
    • 14b Reiser O. Eur. J. Org. Chem. 2019; 4973
    • 14c Arepally S, Chamuah A, Katta N, Sharada DS. Eur. J. Org. Chem. 2019; 7: 1542
    • 15a Dinsmore CJ, Beshore DC. Tetrahedron 2002; 58: 3297
    • 15b Dias LC, Ferreira MA. B. J. Org. Chem. 2012; 77: 4046
    • 15c Sellstedt JH, Guinosso CJ, Begany AJ, Bell SC, Rosenthale M. J. Med. Chem. 1975; 18: 926
    • 15d Wright JB, Hall CM, Johnson HG. N. J. Med. Chem. 1978; 21: 930
    • 15e Klaubert DH, Sellstedt JH, Guinosso CJ, Capetola RJ. Bell S. C. J. Med. Chem. 1981; 24: 742
    • 15f Gudipati NS, Palyam S, Vanjari SK, Challapalli S. Inorg. Chem. Commun. 2020; 119: 108112
    • 15g Gudipati NS, Palyam S, Vanjari SK, Challapalli S. Inorg. Chem. Commun. 2021; 129: 108627
    • 16a Palmer C, Morra NA, Stevens AC, Bajtos Machin BB. P, Pagenkopf BL. Org. Lett. 2009; 11: 5614
    • 16b Xu Y, McLaughlin M, Bolton EN, Reamer RA. J. Org. Chem. 2010; 75: 8666
    • 16c Lynn JW, English JJr. J. Am. Chem. Soc. 1951; 73: 4284
    • 16d Babu VN, Murugan A, Katta N, Sharada DS. J. Org. Chem. 2019; 84: 6631
    • 17a Zhang Z, Gao X, Yu H, Zhang G, Liu J. Adv. Synth. Catal. 2018; 360
    • 17b Adib M, Pashazadeh R, Gohari SJ. A. Synlett 2017; 28: 1481
    • 18a Arepally S, Babu VN, Polu A, Sharada DS. Eur. J. Org. Chem. 2018; 41: 5700
    • 18b Katta N, Murugan A, Ojha M, Arepally S. RSC Adv. 2020; 10: 12599

Corresponding Author

Duddu S. Sharada
Catalysis & Chemical Biology Laboratory, Department of Chemistry, Indian Institute of Technology (IIT) Hyderabad
Kandi, Sangareddy, Telangana 502 285
India   

Publication History

Received: 05 May 2021

Accepted after revision: 18 May 2021

Article published online:
17 June 2021

© 2021. The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial-License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/)

Georg Thieme Verlag KG
Rüdigerstraße 14, 70469 Stuttgart, Germany

  • References

  • 1 Sivaguru P, Wang Z, Zanoni G, Bi X. Chem. Soc. Rev. 2019; 48: 2615
  • 2 Adeli Y, Huang K, Liang Y, Jiang Y, Liu J, Song S, Zeng C.-C, Jiao N. ACS Catal. 2019; 9: 2063
    • 3a Long Z, Yang Y, You J. Org. Lett. 2017; 19: 2781
    • 3b Ni J, Jiang Y, An Z, Yan R. Org. Lett. 2018; 20: 1534
    • 3c Prakash R, Bora BR, Boruah RC, Gogoi S. Org. Lett. 2018; 20: 2297
    • 3d Onodera S, Ishikawa S, Kochi T, Kakiuchi F. J. Am. Chem. Soc. 2018; 140: 9788
  • 4 Tobisu M, Chatani N. Chem. Soc. Rev. 2008; 37: 300
  • 5 Moriarty RM, Penmasta R, Awasthi AK, Prakash I. J. Org. Chem. 1988; 53: 6124
    • 6a Shimada T, Yamamoto Y. J. Am. Chem. Soc. 2003; 125: 6646
    • 6b Datta S, Chang C.-L, Yeh K.-L, Liu R.-S. J. Am. Chem. Soc. 2003; 125: 9294
    • 6c Liu Y.-H, Songand F.-J, Guo S.-H. J. Am. Chem. Soc. 2006; 128: 11332
    • 6d Wang A.-Z, Jiang H.-F. J. Am. Chem. Soc. 2008; 130: 5030
    • 6e Liu Q.-L, Chen P.-H, Liu G.-S. ACS Catal. 2013; 3: 178
    • 6f Xie H.-Z, Gao Q, Liang Y, Wang H.-S, Pan Y.-M. Green Chem. 2014; 16: 2132
  • 7 Biallas P, Haring AP, Kirsch SF. Org. Biomol. Chem. 2017; 15: 3184
  • 8 Hypervalent Iodine Chemistry: Modern Developments in Organic Synthesis, Vol. 224. Wirth T. Springer; Berlin: 2003: 1-248
  • 9 Yu P, Wang Y, Zeng Z, Chen Y. J. Org. Chem. 2019; 84: 14883
  • 10 Yu T.-Y, Zheng Z.-J, Dang T.-T, Zhang F.-X, Wei H. J. Org. Chem. 2018; 83: 10589
    • 11a Marzo L, Pagire SK, Reiser O, König B. Angew. Chem. 2018; 130: 10188
    • 11b Pan Y, Kee CW, Chen L, Tan C.-H. Green Chem. 2011; 13: 2682
    • 11c Guo W.-L, Wang L.-Q, Wang Y.-N, Chen J.-R, Xiao W.-J. Angew. Chem. Int. Ed. 2015; 54: 2265 ; Angew. Chem. 2015, 127, 2293
    • 11d Wang L, Cheng P, Wang X, Wang W, Zeng J, Liang Y, Reiser O. Org. Chem. Front. 2019; 6: 3771
    • 11e Murugan A, Babu VN, Polu A, Sabarinathan N, Bakthadoss M, Sharada DS. J. Org. Chem. 2019; 84: 7796
  • 12 Sun H, Yang C, Gao F, Li Z, Xia W. Org. Lett. 2013; 15: 624
  • 13 Sharma S, Sharma A. Org. Biomol. Chem. 2019; 17: 4384
    • 14a Prier CK, Rankic DA, MacMillan DW. C. Chem. Rev. 2013; 113: 5322
    • 14b Reiser O. Eur. J. Org. Chem. 2019; 4973
    • 14c Arepally S, Chamuah A, Katta N, Sharada DS. Eur. J. Org. Chem. 2019; 7: 1542
    • 15a Dinsmore CJ, Beshore DC. Tetrahedron 2002; 58: 3297
    • 15b Dias LC, Ferreira MA. B. J. Org. Chem. 2012; 77: 4046
    • 15c Sellstedt JH, Guinosso CJ, Begany AJ, Bell SC, Rosenthale M. J. Med. Chem. 1975; 18: 926
    • 15d Wright JB, Hall CM, Johnson HG. N. J. Med. Chem. 1978; 21: 930
    • 15e Klaubert DH, Sellstedt JH, Guinosso CJ, Capetola RJ. Bell S. C. J. Med. Chem. 1981; 24: 742
    • 15f Gudipati NS, Palyam S, Vanjari SK, Challapalli S. Inorg. Chem. Commun. 2020; 119: 108112
    • 15g Gudipati NS, Palyam S, Vanjari SK, Challapalli S. Inorg. Chem. Commun. 2021; 129: 108627
    • 16a Palmer C, Morra NA, Stevens AC, Bajtos Machin BB. P, Pagenkopf BL. Org. Lett. 2009; 11: 5614
    • 16b Xu Y, McLaughlin M, Bolton EN, Reamer RA. J. Org. Chem. 2010; 75: 8666
    • 16c Lynn JW, English JJr. J. Am. Chem. Soc. 1951; 73: 4284
    • 16d Babu VN, Murugan A, Katta N, Sharada DS. J. Org. Chem. 2019; 84: 6631
    • 17a Zhang Z, Gao X, Yu H, Zhang G, Liu J. Adv. Synth. Catal. 2018; 360
    • 17b Adib M, Pashazadeh R, Gohari SJ. A. Synlett 2017; 28: 1481
    • 18a Arepally S, Babu VN, Polu A, Sharada DS. Eur. J. Org. Chem. 2018; 41: 5700
    • 18b Katta N, Murugan A, Ojha M, Arepally S. RSC Adv. 2020; 10: 12599

Zoom Image
Scheme 1 Substrate scope with respect to geminal diazides. Reagents and conditions: 1a (1.0 mmol), Rose Bengal (3 mol%), TBHP in decane (4.0 equiv), MeCN (1.5 mL), 23 W CFL lightbulb, rt, for 24–48 h. Isolated yields after silica gel column chromatography.
Zoom Image
Scheme 2 Control experiments
Zoom Image
Scheme 3Proposed Mechanism