Synlett 2020; 31(06): 610-614
DOI: 10.1055/s-0039-1691524
cluster
© Georg Thieme Verlag Stuttgart · New York

Click Variations on the Synthesis of 2-Nitrophenyl-4-aryl-1,2,3-triazoles without Isolation of 2-Nitrophenyl Azides

Amélie Roux
,
The Centre National de la Recherche Scientifique (CNRS; Emergence@INC 2019 programme, Fluoclick project) is acknowledged for funding.
Further Information

Publication History

Received: 14 October 2019

Accepted after revision: 17 November 2019

Publication Date:
02 December 2019 (online)


Published as part of the ISySyCat2019 Special Issue

Abstract

We report a series of efficient procedures to prepare 2-nitrophenyl-4-aryl-1,2,3-triazoles avoiding the isolation of potentially hazardous 2-nitrophenyl azides. An organocatalyzed azide-enolate variant allows efficient access to the target compounds while it was shown that a metal-catalyzed azide-alkyne procedure involving a preliminary ­Sonogashira coupling was feasible starting from electron-deficient aryl iodides.

Supporting Information

 
  • References

  • 1 Kolb HC, Finn MG, Sharpless KB. Angew. Chem. Int. Ed. 2001; 40: 2004
    • 2a Rostovtsev VV, Green LG, Fokin VV, Sharpless KB. Angew. Chem. Int. Ed. 2002; 41: 2596
    • 2b Tornoe CW, Christensen C, Meldal M. J. Org. Chem. 2002; 67: 3057

    • For recent reviews see:
    • 2c Haldón E, Nicasio MC, Pérez PJ. Org. Biomol. Chem. 2015; 13: 9528
    • 2d Wang CL, Ikhlef D, Kahlal S, Saillard JY, Astruc D. Coord. Chem. Rev. 2016; 316: 1
    • 3a McKay CS, Finn MG. Chem. Biol. 2014; 21: 1075
    • 3b Tang W, Becker ML. Chem. Soc. Rev. 2014; 43: 7013
    • 3c Tiwari VK, Mishra BB, Mishra KB, Mishra N, Singh AS, Chen X. Chem. Rev. 2016; 116: 3086
    • 4a Bonandi E, Christodoulou MS, Fumagalli G, Perdicchia D, Rastelli G, Passarella D. Drug Discovery Today 2017; 22: 1572
    • 4b Dheer D, Singh V, Shankar R. Bioorg. Chem. 2017; 71: 3
    • 5a Bräse S, Gil C, Knepper K, Zimmermann V. Angew. Chem. Int. Ed. 2005; 44: 5188
    • 5b For example, see: Odlo K, Høydahl EA, Hanse TV. Tetrahedron Lett. 2007; 48: 2097
    • 6a Fauché K, Nauton L, Jouffret L, Cisnetti F, Gautier A. Chem. Commun. 2017; 53: 2402
    • 6b Bouchemella K, Fauché K, Anak B, Jouffret L, Bencharif M, Cisnetti F. New J. Chem. 2018; 42: 18969
  • 7 Srinivas D, Ghule VD, Tewari SP, Muralidharan K. Chem. Eur. J. 2012; 18: 15031

    • SNAr:
    • 8a Ramana CV, Goriya Y, Durugkar KA, Chatterjee S, Krishnaswamy S, Gonnade RG. CrystEngComm 2013; 15: 5283
    • 8b Ramana CV, Chatterjee S, Durugkar KA, Gonnade RG. CrystEngComm 2009; 11: 143
    • 8c Dururgkar KA, Gonnade RG, Ramana CV. Tetrahedron 2009; 65: 3974
    • 8d Saha B, Sharma S, Sawant D, Kundu B. Tetrahedron 2008; 64: 8676
    • 8e Saha B, Sharma S, Sawant D, Kundu B. Synlett 2007; 1591
    • 8f Metal-catalyzed: Andersen J, Bolvig S, Liang X. Synlett 2005; 2941
  • 9 Ramachary DB, Shashank AB, Karthik S. Angew. Chem. Int. Ed. 2014; 53: 10420
    • 10a Friscourt F, Boons GJ. Org. Lett. 2010; 12: 4936
    • 10b Israr M, Ye C, Muhammad MT, Li Y, Bao H. Beilstein J. Org. Chem. 2018; 14: 2916 ; and references cited therein
  • 11 Buckley B, Dann S, Heaney H. Chem. Eur. J. 2010; 16: 6278
  • 12 General Procedure (DMSO): 2-Nitroaryl fluoride reagent was dissolved in DMSO (ca. 1 mL per mmol), then NaN3 (1.1 equiv) was added. The solution was either heated or stirred at room temperature until completion of the aromatic nucleophilic substitution (either followed by TLC or 1H NMR). After cooling to room temperature, phenylacetaldehyde (0.9 equiv) and DBU (0.09 equiv) were subsequently added. The mixture was stirred either at room temperature or heated until completion of the reaction (followed by TLC). CH2Cl2 was then added to the solution, and the organic phase was washed with a saturated aqueous solution of NH4Cl. The aqueous phase was then extracted with CH2Cl2 and the combined organic phases were washed with water, brine, dried over MgSO4, and the solvent was evaporated under reduced pressure. Recrystallization with EtOH gave the desired product. Analytical data for a representative compound obtained by this procedure: 1-(5-Chloro-2-nitrophenyl)-4-phenyl-1H-1,2,3-triazole. 1H NMR (500 MHz, DMSO-d 6): δ = 7.36–7.44 (m, 1 H, HAr), 7.51 (t, J = 7.5 Hz, 2 H, HAr), 7.93 (d, J = 7.5 Hz, 2 H, HAr), 8.02 (d, J = 8.5 Hz, 1 H, HAr), 8.10 (dd, J = 8.5, 2.2 Hz, 1 H, HAr), 8.43 (d, J = 2.2 Hz, 1 H, HAr), 9.18 (s, 1 H, Htriazole). 13C NMR (126 MHz, DMSO-d 6): δ = 122.7 (CHAr), 125.4 (CHAr), 125.6 (CHAr), 127.8 (CqAr), 128.5 (CHAr), 128.7 (CHAr), 129.1 (CHAr), 129.7 (CqAr), 134.2 (CHAr), 135.1 (CqAr), 144.3 (Cqtriazole), 147.2 (CqAr). HRMS (ESI): m/z [M + H]+ calcd for C14H10ClN4O2: 301.0487; found: 301.0482.
  • 13 General procedure (acetonitrile): 2-Nitroaryl fluoride reagent was dissolved in MeCN (ca. 1 mL per mmol), then NaN3 (1.1 equiv) and tetrabutylammonium hydrogensulfate (0.1 g per gram of starting material) were added. The solution was either heated or stirred at room temperature until completion of the aromatic nucleophilic substitution (either followed by TLC or 1H NMR). After cooling to room temperature, phenylacetaldehyde (0.9 equiv) and DBU (0.09 equiv) were added. The mixture was stirred either at room temperature or heated to 80 °C until completion of the reaction (followed by TLC). Either work-up 1 or 2 were used. Work-up 1 (gram-scale): as described in reference 12. Work-up 2 (Table 1, entries 6, 10; 10–30 g scale): a massive precipitate was observed. The solid was isolated by filtration and washed with a minimal amount of cold (0 °C) acetonitrile and several times with water. After desiccation, the solid was obtained in pure form. Analytical data for a representative compound obtained by this procedure: 1-(4-Iodo-2-nitrophenyl)-4-phenyl-1H-1,2,3-triazole. 1H NMR (400 MHz, DMSO-d 6): δ = 7.35–7.45 (m, 1 H, Har), 7.46–7.55 (m, 2 H, Har), 7.74 (d, J = 8.3 Hz, 1 H, Har), 7.93 (d, J = 7.2 Hz, 2 H, Har), 8.36 (dd, J = 8.3, 1.7 Hz, 1 H, Har), 8.58 (d, J = 1.6 Hz, 1 H, Har), 9.17 (s, 1 H, Htriazole).13C NMR (100 MHz, DMSO-d 6): δ = 96.4 (Cqar-I), 122.5 (CHar), 125.4 (CHtriazole), 128.4 (CHar), 128.5 (Cqar), 128.5 (Cqar), 129.1 (CHar), 129.7 (Cqar), 133.5 (CHar), 142.8 (CHar), 144.1 (Cqtriazole), 147.2 (CHar). HRMS (ESI): m/z [M + H]+ calcd for C14H10IN4O2: 392.9843; found: 392.9840.
  • 14 Previously reported (small-scale preparation): Jia Z, Zhu Q. Bioorg. Med. Chem. Lett. 2010; 20: 6222
  • 15 Previously reported (61% yield) in reference 8c.
  • 16 Ghosh PB, Ternai B, Whitehouse MW. J. Med. Chem. 1972; 15: 255
  • 17 As evidenced by a dangerous massive gaseous evolution we observed while performing an experiment related to entry 7 under the conditions described by Ramana et al. in reference 8c.
  • 18 General procedure (Sonogashira click): In a first round-bottom flask, iodophenyl starting material was dissolved in THF (10 mL per 4 mmol). Ethynyltrimethylsilane (1.1 equiv), triethylamine (4 equiv), PdCl2(PPh3)2 (0.4 mol%), and CuI (0.4 mol%) were then added, and the mixture was stirred at 50 °C until completion of the Sonogashira reaction. In a second round-bottom flask, fluoronitrobenzene starting material (1.05 equiv) was dissolved in MeCN (10 mL per 4 mmol). Sodium azide (1.15 equiv) and tetrabutylammonium hydrogensulfate (0.05 equiv) were then added and the mixture was stirred at 50 °C until completion of the aromatic nucleophilic substitution reaction. The first round-bottom flask was then filtrated, and the filtrate was poured into the second round-bottom flask. CuI (8 mol%) was finally added, and the resulting mixture was stirred at 60 °C until completion of both the deprotection and click reaction. The resulting solution was then filtered over Celite, and the filtrate was evaporated under reduced pressure. Recrystallization with EtOH was performed to obtain the desired product. Analytical data for a representative compound obtained by this procedure: Methyl 4-[1-(5-chloro-2-nitrophenyl)-1H-1,2,3-triazol-4-yl]benzoate: 1H NMR (400 MHz, DMSO-d 6): δ = 3.88 (s., 3 H, CH3), 7.85–8.08 (overlapping signals, 5 H, HAr), 8.18–8.39 (overlapping signals, 2 H, HAr), 9.36 (s, 1 H, Htriazole). 13C NMR (126 MHz, DMSO-d 6): δ = 52.0 (CH3), 124.0 (CH, CAr), 125.3 (CH, CAr), 127.2 (CH, CAr), 127.2 (CH, CAr), 129.1 (Cq, CAr), 129.8 (Cq, CAr), 129.9 (CH, CAr), 131.0 (CH, CAr), 134.0 (Cq, CAr), 138.4 (Cq, CAr), 142.4 (Cq, Ctriazole), 145.8 (Cq, CAr), 165.7 (Cq, C=O). HRMS (ESI): m/z [M + H]+ calcd for C16H12N4O4Cl: 359.0542; found: 359.0532.
  • 19 Shashank AB, Karthik S, Madhavachary R, Ramachary DB. Chem. Eur. J. 2014; 16877