RSS-Feed abonnieren
![](/products/assets/desktop/img/oa-logo.png)
DOI: 10.1055/s-0037-1610366
A Simple and Mild Microwave-Based Synthesis of Novel Functionalized Benzofulvenes
Publikationsverlauf
Received: 01. August 2018
Accepted after revision: 21. August 2018
Publikationsdatum:
14. September 2018 (online)
Abstract
Benzofulvenes and their derivatives are useful molecular entities having applications as biologically active molecules, polymer precursors, and optoelectronic devices. We have developed a simple and mild synthetic method for the formulation of a variety of these interesting compounds. Using carbonyl coupling techniques combined with microwave heating, a wide variety of functionalized benzofulvenes can be accessed rapidly in good yield. Furthermore, we have obtained five crystal structures further expanding a limited number of benzofulvene structures available.
#
Fulvene-based motifs are widely regarded as molecules of great interest,[1] arguably owing to their increasing presence in pharmaceutical applications,[2] molecular materials,[3] use as synthetic precursors,[4] and overall intriguing physical and chemical properties. In particular, the fulvene motif is a useful handle to probe aromaticity in what has been previously called an aromatic chameleon.[5] While there are synthetic methods available for their preparation, most modern methods have become quite complex, using precursors and intermediates that are difficult to synthesize and/or expensive. Furthermore, many preparations use metal catalysts that must be fully removed before any applied use of the fulvene.[6] Recently, there has been an effort to focus on cyclization reactions of enediynes,[7] alkynyl derivatives,[8] and transition-metal-based transformations[9] to obtain these valuable functionalized fulvenes. While these methods have greatly improved our abilities to access a wealth of benzofulvene-based motifs, there is arguably room in this mix for a simple and effective synthetic solution. To that end we have been engaged in modifying and optimizing a traditional route to the benzofulvene core[10] by utilizing substituted indanones to produce known and many novel functionalized benzofulvenes in three simple synthetic steps (Scheme [1]).
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_s1_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Our method utilizes reproducible, standard synthetic transformations that may have a more practical nature than many of the more complex synthetic steps currently being reported. Finally, our method is highly regioselective.
As illustrated in Scheme [1], our synthetic route begins with subjecting commercially available indanone to simple carbonyl coupling with various nucleophilic organometallic reagents (e.g., organolithium, organolanthanum, Grignard). We then subject the crude indanol mixture to known procedures utilizing catalytic iodine[11] or diethylphosphite-based[12] elimination to produce the key indene intermediate. Our final synthetic step is a novel DBU mediated microwave coupling, to attach various benzaldehydes in good yield in a rapid and mild reaction (ca. 10 minutes 60 °C). Herein, we describe our work synthesizing a variety of functionalized benzofulvenes via a simple and mild method.
We began our synthetic process by optimizing the coupling of phenylindene with 4-methylbenzaldehyde (Table [1]) by probing a variety of nucleophilic organometallic species to mediate the condensation. We found that yields were acceptable using an organolithium reagent in THF (entries 1 and 2). Upon switching to 2-MeTHF the yield was much improved relative to all other solvents investigated (entries 2–5). It is important to note that 2-MeTHF is considered a green solvent as it can be produced from agricultural waste.[13] Other common nucleophilic metal species did improve the yield (entries 6 and 7), but arguably not enough to justify the added expense and complexity. Finally, we investigated using DBU (entry 8) in a microwave-heated transformation. While the yield described in entry 3 was the highest, we had a number of issues regarding reproducibility while using organolithium reagents for the transformation. Additionally the air-free nature of nucleophilic organometallic reagents can be problematic. For these reasons, we opted to use DBU under ambient conditions, because the yield was comparable and we found the reproducibility to be robust. Finally, the synthesis using DBU was much more straightforward from an ease of reaction standpoint, keeping with our desired strategy.
a All organometallic species were produced in situ. Specific synthetic information can be found in the Supporting Information.
b All yields are from 1H NMR analysis using a hexadecane internal standard.
c DBU (1 equiv.) was used.
We began to develop our synthetic library by functionalizing the exocyclic aromatic portion of the benzofulvene motif, as well as the indene core (Scheme [2]). We have demonstrated that highly sterically restricted units can be incorporated in moderate yield (2b and 2d). Highly electron-withdrawing trifluoromethyl groups (2e) could also be incorporated without issue. Unfortunately, we observed a decrease in yield for 2h.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_s2_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
We continued testing our method by incorporating electron-rich nucleophiles by transitioning to an organolanthanum addition during the indanone to indene synthesis (Scheme [3]). When using standard carbonyl coupling reagents (i.e., organolithium or Grignard) we observed complete selectivity for the acid-base reaction. Upon switching to an organolanthanum coupling partner we were rewarded by improved yield for indene 1d.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_s3_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Once we successfully synthesized the methoxynaphthalene benzofulvene (Scheme [4, 3a]) we aimed to synthesize a hydroxyl derivative using a BBr3 deprotection[14] to produce 3b. We were delighted to witness this transformation without degradation of the fulvene motif. Furthermore, a hydroxyl derivative would allow for further reactivity through a variety of alkoxide-based transformations. Finally, we were able to produce fluoro derivative 3c.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_s4_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Additionally, we have provided preliminary evidence that our method is capable of producing larger benzofulvene dimers (Scheme [5]). These dimers are a particularly interesting class of benzofulvenes because of their larger two-dimensional conjugation. We were particularly pleased with the synthesis of more sterically restricted dimer 4a, albeit in low yield.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_s5_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Finally, in an effort to unambiguously determine structure, we obtained XRD structures for select compounds (Figure [1]). Significantly, these will add to the limited number of fulvene-based structures available in the literature. Furthermore, our synthetic method allows for facile access to a wide variety of benzofulvenes that can be used to probe the interesting structural features related to the fulvene motif. Specifically, we wish to probe how dihedral angles around the exocyclic arene affect the bond length alternation of the fulvene. By producing a larger pool of crystal structures, we hope to probe how the bond length alternation of the fulvene is changed by the exocyclic arene. This ongoing work may provide further empirical evidence to reveal the nature of the aromatic characteristics of the fulvene.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f1_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
In effect, we have established a simple and mild strategy for the synthesis of functionalized benzofulvenes. We have demonstrated broad functional group tolerance and the synthesis of some interesting benzofulvene motifs, including sterically bulky examples, an ability to incorporate EWGs and EDGs, and larger dimers using a simple and mild approach.
Oxygen- and moisture-sensitive manipulations (indene synthesis) were performed by using standard Schlenk line techniques using anhydrous nitrogen gas.
Reagents 2-MeTHF, DBU, THF, various benzaldehydes, phenyl magnesium bromide and lanthanum(III) chloride were purchased from chemical manufacturers (i.e., Sigma Aldrich, TCI and Oakwood Chemical) and used without further purification.
1H and 13C NMR spectra were measured with a Bruker 500 MHz Avance III NMR Spectrometer. All spectra were referenced to the respective solvent of CDCl3. GCMS was acquired with a HP GCMS with auto sampler. HRMS was obtained by the University of Michigan’s Mass Spectrometry Facility. Microwave heating was performed with a Biotage Emrys Optimizer 300 W synthesizer. All microwave heating was performed in a sealed reaction vessel under ambient conditions using variable watt heating.
Synthesis of Functionalized Benzofulvenes 2a–4b
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f2_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 2a (42788-18-1; Figure [2]) [15]
To a 10 mL microwave vial was added, indene 1a (0.135 g, 0.70 mmol), benzaldehyde (0.075 g, 0.52 mmol), 2-MeTHF (1.0 mL), and DBU (0.110 g, 0.70 mmol) and sealed. The mixture was stirred at 60 °C for 10 minutes by microwave heating. Once the reaction had finished, the crude mixture was flushed through a silica plug and the solvent removed under reduced pressure. The crude oil was subjected to flash chromatography (hexanes; Rf = 0.9). The solvent was removed under reduced pressure to give a red oil.
Yield: 0.175 g (0.13 mmol, 60%).
1H NMR (CDCl3, 500 MHz): δ = 7.87–7.85 (m, 1 H), 7.79 (d, J = 8 Hz, 2 H), 7.74 (d, J = 8 Hz, 2 H), 7.70–7.68 (m, 1 H), 7.61 (s, 1 H), 7.57–7.38 (m, 8 H), 7.24 (s, 1 H)
X-ray diffraction yielded crystal structure (CCDC 1835910).
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f3_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 2b (Figure [3])
The procedure for 2a was followed using indene 1b (0.100 g, 0.37 mmol), 2,6-dimethylbenzaldehyde (0.049 g, 0.37 mmol), 2-MeTHF (1.0 mL), and DBU (0.056 g, 0.37 mmol). The crude oil was subjected to flash chromatography (hexane; Rf = 0.9). The solvent was removed under reduced pressure to give a crystalline orange solid.
Yield: 0.084 g (0.22 mmol, 60%); mp 154–160 °C.
1H NMR (CDCl3, 500 MHz): δ = 7.99 (s, 1 H), 7.63 (d, J = 8 Hz, 2 H), 7.53–7.42 (m, 6 H), 7.24–7.17 (m, 3 H), 6.47 (s, 1 H), 2.35 (s, 6 H)
13C NMR (CDCl3, 125 MHz): δ = 145.9, 140.5, 140.4, 139.5, 136.4, 135.4, 135.0, 130.0, 128.7, 128.6, 128.3, 127.7, 127.5 (2 signals overlap), 124.4, 122.9, 121.5, 119.6, 20.9.
GC-MS EI: m/z [M]+ calcd: 386.07; found: 386; m/z [M+2]+ calcd.: 388.06; found: 388.
HRMS EI: m/z [M]+ calcd: 386.0670; found: 386.0663.
X-ray diffraction yielded crystal structure (CCDC 1835914).
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f4_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 2c (Figure [4])
The procedure for 2a was followed using indene 1a (0.100 g, 0.52 mmol), o-tolualdehyde (0.073 g, 0.52 mmol), 2-MeTHF (1.1 mL), and DBU (0.081 g, 0.53 mmol). The crude oil was subjected to flash chromatography (95:5, hexane/EtOAc; Rf = 0.9). The solvent was removed under reduced pressure to give a crystalline orange oil/solid.
Yield: 0.109 g (0.13 mmol, 67%).
1H NMR (CDCl3, 500 MHz): δ = 7.91–7.89 (m, 1 H), 7.78–7.76 (m, 3 H), 7.71–7.67 (m, 2 H), 7.55–7.52 (m, 3 H), 7.47–7.35 (m, 5 H), 7.07 (s, 1 H), 2.54 (s, 3 H).
13C NMR (CDCl3, 125 MHz): δ = 147.0, 141.2, 139.8, 138.4, 137.5, 136.1, 135.7, 131.1, 130.2, 128.6, 128.3, 128.0, 127.7, 127.4, 127.0, 126.0, 125.4, 123.8, 120.3, 119.4, 20.1.
GC-MS EI: m/z [M]+ calcd.: 294.14; found: 294.
HRMS EI: m/z [ M]+ calcd.: 294.1409; found: 294.1402.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f5_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 2d (Figure [5])
The procedure for 2a was followed using indene 1b (0.099 g, 0.37 mmol), 2-isopropylbenzaldehyde (0.055 g, 0.37 mmol), 2-MeTHF (1.0 mL), and DBU (0.056 g, 0.37 mmol). The crude oil was subjected to flash chromatography (hexane; Rf = 0.9). The solvent was removed under reduced pressure to give an orange/red oil.
Yield: 0.102 g (0.25 mmol, 69%).
1H NMR (CDCl3, 500 MHz): δ = 7.92 (d, J = 1 Hz, 1 H), 7.80 (s, 1 H), 7.64 (d, J = 7 Hz, 2 H), 7.52–7.37 (m, 9 H), 6.91 (d, J = 1 Hz, 1 H), 3.33 (sept, J = 7 Hz, 1 H), 1.30 (d, J = 7 Hz, 6 H).
13C NMR (CDCl3, 125 MHz): δ = 148.1, 146.2, 140.3, 139.9, 139.2, 135.2, 134.5, 131.6, 130.0, 129.0, 128.7, 128.5, 128.2, 127.5, 125.7, 125.2, 124.1, 122.8, 121.5, 119.4, 30.2, 23.5.
GC-MS EI: m/z [M]+ calcd.: 400.08; found: 400; m/z [M+2]+ calcd.: 402.08; found: 402.
HRMS EI: m/z [M]+ calcd.: 400.0827; found: 400.0828.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f6_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 2e (Figure [6])
The procedure for 2a was followed using indene 1b (0.099 g, 0.37 mmol), 2-trifluoromethylbenzaldehyde (0.064 g, 0.37 mmol), 2-MeTHF (1.0 mL), and DBU (0.056 g, 0.37 mmol). The crude oil was subjected to flash chromatography (hexane; Rf = 0.9). The solvent was removed under reduced pressure to give a crystalline orange solid.
Yield: 0.098 g (0.23 mmol, 62%); mp 118–122 °C.
1H NMR (CDCl3, 500 MHz): δ = 7.92 (d, J = 1 Hz, 1 H), 7.79–7.78 (m, 2 H), 7.71–7.62 (m, 4 H), 7.51–7.40 (m, 6 H), 6.83 (s, 1 H).
13C NMR (CDCl3, 125 MHz): δ = 147.8, 140.7, 140.1, 135.1, 134.9, 132.8, 131.7, 130.6, 129.1 (quartet, 2 J = 30 Hz), 128.7, 128.6, 128.6 (quartet, 3 J could not be determined due to signal overlap), 128.2, 127.5, 126.1 (quartet, 3 J = 5 Hz), 124.9, 123.2, 123.1, 121.7, 119.9. 1J R-CF3 could not be determined due to signal overlap.
GCMS EI: m/z [M]+ calcd.: 426.02; found: 426; m/z [M+2]+ calcd.: 428.02; found: 428.
HRMS EI: m/z [M]+ calcd.: 426.0231; found: 426.0228.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f7_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 2f (Figure [7])
The procedure for 2a was followed using indene 1a (0.100 g, 0.52 mmol), 2-bromobenzaldehyde (0.096 g, 0.52 mmol), 2-MeTHF (1.0 mL), and DBU (0.082 g, 0.52 mmol). The crude oil was subjected to flash chromatography (hexane; Rf = 0.9). The solvent was removed under reduced pressure to give a crystalline orange solid.
Yield: 0.15 g (0.40 mmol, 78%); mp 108–111 °C.
1H NMR (CDCl3, 500 MHz): δ = 7.73–7.71 (m, 1 H), 7.57–7.53 (m, 5 H), 7.49–7.46 (m, 1 H), 7.36–7.19 (m, 6 H), 7.10–7.06 (m, 1 H), 6.79 (s, 1 H).
13C NMR (CDCl3, 125 MHz): δ = 148.0, 141.1, 140.6, 138.2, 137.0, 135.5, 132.9, 132.4, 129.4, 128.7, 128.2, 127.8, 127.3, 127.1, 127.0, 125.7, 125.1, 122.9, 120.4, 119.8.
GC-MS EI: m/z [M]+ calcd.: 358.04; found: 358; m/z [M+2]+ calcd.: 360.03; found: 360.
HRMS EI: m/z [M]+ calcd.: 358.0357; found: 358.0351.
X-ray diffraction yielded crystal structure (CCDC 1835913).
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f8_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 2g (Figure [8])
The procedure for 2a was followed using indene 1a (0.100 g, 0.52 mmol), 2-chlorobenzaldehyde (0.076 g, 0.52 mmol), 2-MeTHF (1.0 mL), and DBU (0.082 g, 0.52 mmol). The crude oil was subjected to flash chromatography (hexane; Rf = 0.9). The solvent was removed under reduced pressure to give a crystalline orange solid.
Yield: 0.110 g (0.35 mmol, 68%); mp 90–95 °C.
1H NMR (CDCl3, 500 MHz): δ = 7.90–7.88 (m, 1 H), 7.80 (s, 1 H), 7.76–7.74 (m, 3 H), 7.67–7.65 (m, 1 H), 7.54–7.50 (m, 3 H), 7.47–7.44 (m, 1 H), 7.41–7.32 (m, 4 H), 7.00 (s, 1 H).
13C NMR (CDCl3, 125 MHz): δ = 148.1, 141.1, 140.7, 138.3, 135.5, 135.3, 134.8, 132.3, 129.7, 129.3, 128.6, 128.2, 127.8, 127.1, 126.7, 125.7, 124.6, 122.9, 120.4, 119.8.
GC-MS EI: m/z [M]+ calcd.: 314.09; found: 314; m/z [M+2]+ calcd.: 316.08; found: 316.
HRMS EI: m/z [M]+ calcd.: 314.0862; found: 314.0860.
X-ray diffraction yielded crystal structure (CCDC 1835911).
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f9_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 2h (Figure [9])
The procedure for 2a was followed using indene 1b (0.100 g, 0.37 mmol), 2-chloro-4-methoxybenzaldehyde (0.063 g, 0.37 mmol), 2-MeTHF (1.0 mL), and DBU (0.056 g, 0.37 mmol). The crude oil was subjected to flash chromatography (hexane; Rf = 0.9). The solvent was removed under reduced pressure to give a crystalline orange solid.
Yield: 0.031 g (0.074 mmol, 20%); mp 120–123 °C.
1H NMR (CDCl3, 500 MHz): δ = 7.92 (s, 1 H), 7.68–7.63 (m, 3 H), 7.50–7.38 (m, 6 H), 7.04 (d, J = 3 Hz, 1 H), 6.96 (s, 1 H), 6.91–6.89 (m, 1 H), 3.86 (s, 3 H).
13C NMR (CDCl3, 125 MHz): δ = 160.5, 146.8, 140.5, 139.5, 138.1, 136.0, 135.2, 133.0, 130.0, 128.7, 128.4, 127.5, 127.1, 125.7, 123.1, 122.9, 121.6, 119.6, 115.1, 113.4, 55.7.
HRMS EI: m/z [M]+ calcd: 422.0073; found: 422.0080.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f10_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 2i (Figure [10])
The procedure for 2a was followed using indene 1b (0.100 g, 0.37 mmol), 2-bromobenzaldehyde (0.068 g, 0.37 mmol), 2-MeTHF (1.0 mL), and DBU (0.056 g, 0.37 mmol). The crude oil was subjected to flash chromatography (98:2, hexane/EtOAc). The solvent was removed under reduced pressure to give a crystalline orange solid.
Yield: 0.13 g (0.29 mmol, 78%); mp 114–119 °C.
1H NMR (CDCl3, 500 MHz): δ = 7.93 (s, 1 H), 7.68–7.62 (m, 5 H), 7.48–7.44 (m, 4 H), 7.42–7.38 (m, 3 H), 6.90 (s, 1 H).
13C NMR (CDCl3, 125 MHz): δ = 147.4, 140.2, 139.9, 139.6, 136.6, 135.0, 133.0, 132.4, 130.4, 129.8, 128.7, 128.5, 128.2, 127.5, 127.4, 125.2, 123.2, 123.1, 121.6, 119.8.
GCMS EI: m/z [M]+ calcd.: 435.95; found: 436.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f11_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 3a (Figure [11])
The procedure for 2a was followed using indene 1d (0.150 g, 0.49 mmol), 3-chlorobenzaldehyde (0.0687 g, 0.49 mmol), 2-MeTHF (1.0 mL), and DBU (0.0744 g, 0.49 mmol). The crude oil was subjected to flash chromatography (95:5, hexane/EtOAc; Rf = 0.9). The solvent was removed under reduced pressure to give a crystalline orange solid.
Yield: 0.147 g (70%); mp 135–140 °C.
1H NMR (CDCl3, 500 MHz): δ = 7.95 (d, J = 9 Hz, 1 H), 7.87–7.85 (m, 1 H), 7.78–7.75 (m, 2 H), 7.65 (s, 1 H), 7.54–7.52 (d, J = 9 Hz, 1 H), 7.46 (s, 1 H), 7.42–7.31 (m, 5 H), 7.19–7.16 (m, 1 H), 7.12 (s, 1 H), 6.83 (d, J = 8 Hz, 1 H), 3.89 (s, 3 H).
13C NMR (CDCl3, 125 MHz): δ = 154.6, 143.4, 141.3, 139.8, 139.3, 138.5, 134.8, 133.1, 131.6, 130.1, 130.0, 129.9, 129.2, 128.5, 128.4, 128.1, 127.5, 127.2, 126.7, 126.5, 125.2, 123.8, 121.7, 119.7, 113.5, 56.6. One aromatic signal overlaps.
HRMS EI: m/z [M]+ calcd.: 428.0735; found: 428.0739.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f12_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 3b (Figure [12])
To a dried and flushed flask was added benzofulvene 3a (125 mg, 0.292 mmol) and anhydrous dichloromethane (3 mL). The solution was cooled to 0 °C, and boron tribromide (1.0 M in CH2Cl2,0.32 mL) was added dropwise. The reaction was warmed to r.t. and stirred overnight. Upon completion, the reaction was worked up with sodium thiosulfate (25 mL, 10% aqueous) and EtOAc (20 mL). The organic layer was dried (MgSO4 anhydrous) and concentrated under reduced pressure. The crude oil was then purified by flash chromatography (50:50, hexane/EtOAc; Rf = 0.6) to give a bright orange solid.
Yield: 76.4 mg (63%); mp 120–122 °C.
1H NMR (CDCl3, 500 MHz): δ = 7.86–7.83 (m, 2 H), 7.77 (s, 1 H), 7.62 (s, 1 H), 7.59–7.56 (m, 1 H), 7.54–7.50 (m, 2 H), 7.39–7.34 (m, 4 H), 7.30 (d, J = 9 Hz, 1 H), 7.23 (s, 1 H), 7.18 (dd, J = 8, 2 Hz, 1 H), 6.86 (d, J = 8 Hz, 1 H), 5.60 (s, br, 1 H).
13C NMR (CDCl3, 125 MHz): δ = 151.0, 141.6, 140.0, 139.5, 139.2, 138.0, 134.9, 132.7, 132.6, 130.5, 130.2, 130.1, 129.0, 128.9, 128.4, 128.3, 127.9, 127.2, 126.7, 125.0, 123.7, 122.2, 120.1, 117.6, 113.6. One aromatic signal overlaps.
HRMS EI: m/z [M]+ calcd.: 414.0578; found: 414.0550.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f13_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 3c (Figure [13])
The procedure for 2a was followed using indene 1c (0.160 g, 1.1 mmol), 3-chlorobenzaldehyde (0.22 g, 1.0 mmol), 2-MeTHF (2.0 mL), and DBU (0.170 g, 1.1 mmol). The crude oil was subjected to flash chromatography (95:10, hexane/EtOAc; Rf = 0.8). The solvent was removed under reduced pressure to give a crimson solid.
Yield: 0.162 g (47%).; mp 110–114 °C.
1H NMR (CDCl3, 500 MHz): δ = 7.68–7.66 (m, 2 H), 7.62 (s, 1 H), 7.51–7.48 (m, 4 H), 7.44–7.41 (m, 2 H), 7.37–7.34 (m, 3 H), 7.04–7.00 (m, 2 H).
13C NMR (CDCl3, 125 MHz): δ = 163.1–161.2 (d, J = 244 Hz, C–F 1 J), 147.8, 140.9, 140.8, 139.5, 138.4, 136.7, 135.2, 134.7, 129.9 (d, J = 7 Hz, C–F 3 J), 128.7, 128.5 (d, J = 7 Hz, C–F 3 J), 128.3, 127.5, 126.9, 122.3 (d, J = 3 Hz, C–F 4 J), 121.3, 121.2, 114.1–114.0 (d, J = 23 Hz, C–F 2 J), 107.4–107.2 (d, J = 23 Hz, C–F 2 J).
GC-MS EI: m/z [M]+ calcd.: 332.8; found: 332.
HRMS EI: m/z [M]+ calcd.: 332.0768; found: 332.0767.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f14_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 4a (Figure [14])
The procedure for 2a was followed using indene 1a (0.200 g, 1.0 mmol), m-phthalaldehyde (0.070 g, 0.5 mmol), 2-MeTHF (1.0 mL), and DBU (0.182 g, 1.2 mmol). The crude oil was subjected to flash chromatography (95:5, hexane/EtOAc; Rf = 0.8). The solvent was removed under reduced pressure to give a yellow oil.
Yield: 0.040 g (16%).
1H NMR (CDCl3, 500 MHz): δ = 7.94 (s, 1 H), 7.83–7.81 (m, 2 H), 7.72–7.71 (m, 4 H), 7.67–7.62 (m, 4 H), 7.57 (s, 2 H), 7.54–7.53 (m, 1 H), 7.48–7.44 (m, 4 H), 7.42–7.40 (m, 2 H), 7.37–7.34 (m, 4 H), 7.2 (s, 2 H).
13C NMR (CDCl3, 125 MHz): δ = 148.0, 140.8, 139.8, 138.8, 137.6, 135.6, 131.6, 130.0, 129.1, 128.6 (2 peaks overlapped), 128.2, 127.6, 127.5, 127.4, 125.6, 122.8, 120.4, 119.5.
HRMS EI: m/z [M]+ calcd.: 482.2034; found: 482.2034.
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f15_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
Benzofulvene 4b (Figure [15])
The procedure for 2a was followed using indene 1a (0.200 g, 1.0 mmol), p-phthalaldehyde (0.070 g, 0.5 mmol), 2-MeTHF (1.0 mL), and DBU (0.185 g, 1.2 mmol). The crude oil was subjected to flash chromatography (95:5, hexane/EtOAc; Rf = 0.8). The solvent was removed under reduced pressure to give a red solid.
Yield: 0.100 g (40%); mp 212–214 °C.
1H NMR (CDCl3, 500 MHz): δ = 7.82–7.80 (m, 2 H), 7.76 (s, 4 H), 7.74–7.73 (m, 4 H), 7.62–7.60 (2 H), 7.54 (s, 2 H), 7.51–7.48 (m, 5 H), 7.43–7.40 (m, 3 H), 7.34–7.32 (m, 4 H), 7.20 (s, 2 H).
Full characterization data can be obtained from a prior publication.[16]
#
#
Acknowledgment
We wish to thank the following individuals for their help with synthetic work: John Rubenkonig, Austin Erler, Michael Cargill, Valerie Lesniak, Gregg Lowery, and John Fordice.
Supporting Information
- Supporting information for this article is available online at https://doi.org/10.1055/s-0037-1610366.
- Supporting Information
-
References
- 1 Preethalayam P, Krishnan KS, Thulasi S, Chand SS, Joseph J, Nair V, Jaroschik F, Radhakrishnan KV. Chem. Rev. 2017; 117: 3930
- 2a Licciardi M, Scialabba C, Giammona G. J. Nanopart. Res. 2017; 19: 197
- 2b Cappelli A, Paolino M, Grisci G, Razzano V, Giuliani G, Donati A, Bonechi C, Mendichi R, Battiato S, Samperi F, Scialabba C, Giammona G, Makovece F, Licciardi M. Polym. Chem. 2016; 7: 6529
- 3a Corrente GA, Fabiano E, De Marco L, Accorsi G, Giannuzzi R, Cardone A, Gigli G, Ciccarella G, Capodilupo A.-L. J. Mater. Sci.: Mater. Electron. 2017; 28: 8694
- 3b Tortorella S, Talamo MM, Cardone A, Pastore M, Angelis F. J. Phys.: Condens. Matter 2016; 28: 074005
- 3c Biani FF, Reale A, Razzano V, Paolino M, Giuliani G, Donati A, Giorgi G, Mroz W, Piovanni D, Botta C, Cappelli A. RSC Adv. 2018; 8: 10836
- 4 Donslund BS, Nielsen RP, Mønsted SM. N, Jørgensen KA. Angew. Chem. 2016; 128: 11290
- 5a Möllerstedt H, Carmen M, Crespo R, Ottosson H. J. Am. Chem. Soc. 2004; 126: 13938
- 5b Ayub R, El Bakouri O, Jorner K, Solà M, Ottosson H. J. Org. Chem. 2017; 82: 6327
- 6 Bahramian B, Ma Y, Rohanizadeh R, Chrzanowski W, Dehghani F. Green Chem. 2016; 18: 3740
- 7 Chen S, Li L, Sun S, Ding Y, Hu A. Macromolecules 2017; 50: 534
- 8 García-García P, Sanjuán AM, Rashid MA, Martínez-Cuezva A, Fernández-Rodríguez MA, Rodríguez F, Sanz R. J. Org. Chem. 2017; 82: 1155
- 9 Shin S, Son J.-U, Choi C, Kim S, Lee PH. J. Org. Chem. 2016; 81: 11706
- 10 Böhme TM, Keim C, Dannhardt G, Mutschler E, Lambrecht G. Bioorg. Med. Chem. Lett. 2001; 11: 1241
- 11 Stavber G, Zupan M, Stavber S. Tetrahedron Lett. 2006; 8463
- 12 Wang T, Hu Y, Zhang S. Org. Biomol. Chem. 2010; 8: 2312
- 13 Aycock DF. Org. Process Res. Dev. 2007; 11: 156
- 14 Kosik TM, Conrad HA, Korich AL, Lord RL. Eur. J. Org. Chem. 2015; 7460
- 15 Marcuzzi F, Melloni G. Chim. Ind. (Rome, Italy) 1976; 58: 734s
- 16 Glass AC, Cargill M. ChemSpider Synthetic Pages 2015; SP 778
-
References
- 1 Preethalayam P, Krishnan KS, Thulasi S, Chand SS, Joseph J, Nair V, Jaroschik F, Radhakrishnan KV. Chem. Rev. 2017; 117: 3930
- 2a Licciardi M, Scialabba C, Giammona G. J. Nanopart. Res. 2017; 19: 197
- 2b Cappelli A, Paolino M, Grisci G, Razzano V, Giuliani G, Donati A, Bonechi C, Mendichi R, Battiato S, Samperi F, Scialabba C, Giammona G, Makovece F, Licciardi M. Polym. Chem. 2016; 7: 6529
- 3a Corrente GA, Fabiano E, De Marco L, Accorsi G, Giannuzzi R, Cardone A, Gigli G, Ciccarella G, Capodilupo A.-L. J. Mater. Sci.: Mater. Electron. 2017; 28: 8694
- 3b Tortorella S, Talamo MM, Cardone A, Pastore M, Angelis F. J. Phys.: Condens. Matter 2016; 28: 074005
- 3c Biani FF, Reale A, Razzano V, Paolino M, Giuliani G, Donati A, Giorgi G, Mroz W, Piovanni D, Botta C, Cappelli A. RSC Adv. 2018; 8: 10836
- 4 Donslund BS, Nielsen RP, Mønsted SM. N, Jørgensen KA. Angew. Chem. 2016; 128: 11290
- 5a Möllerstedt H, Carmen M, Crespo R, Ottosson H. J. Am. Chem. Soc. 2004; 126: 13938
- 5b Ayub R, El Bakouri O, Jorner K, Solà M, Ottosson H. J. Org. Chem. 2017; 82: 6327
- 6 Bahramian B, Ma Y, Rohanizadeh R, Chrzanowski W, Dehghani F. Green Chem. 2016; 18: 3740
- 7 Chen S, Li L, Sun S, Ding Y, Hu A. Macromolecules 2017; 50: 534
- 8 García-García P, Sanjuán AM, Rashid MA, Martínez-Cuezva A, Fernández-Rodríguez MA, Rodríguez F, Sanz R. J. Org. Chem. 2017; 82: 1155
- 9 Shin S, Son J.-U, Choi C, Kim S, Lee PH. J. Org. Chem. 2016; 81: 11706
- 10 Böhme TM, Keim C, Dannhardt G, Mutschler E, Lambrecht G. Bioorg. Med. Chem. Lett. 2001; 11: 1241
- 11 Stavber G, Zupan M, Stavber S. Tetrahedron Lett. 2006; 8463
- 12 Wang T, Hu Y, Zhang S. Org. Biomol. Chem. 2010; 8: 2312
- 13 Aycock DF. Org. Process Res. Dev. 2007; 11: 156
- 14 Kosik TM, Conrad HA, Korich AL, Lord RL. Eur. J. Org. Chem. 2015; 7460
- 15 Marcuzzi F, Melloni G. Chim. Ind. (Rome, Italy) 1976; 58: 734s
- 16 Glass AC, Cargill M. ChemSpider Synthetic Pages 2015; SP 778
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_s1_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/i_d0045_t1_10-1055_s-0037-1610366.gif)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_s2_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_s3_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_s4_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_s5_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f1_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f2_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f3_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f4_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f5_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f6_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f7_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f8_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f9_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f10_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f11_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f12_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f13_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f14_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)
![](https://www.thieme-connect.de/media/10.1055-s-00032269/201803/thumbnails/i_d0045_f15_10-1055_s-0037-1610366.gif)
![Zoom Image](/products/assets/desktop/css/img/icon-figure-zoom.png)