CC BY-NC-ND 4.0 · SynOpen 2021; 05(03): 232-251
DOI: 10.1055/a-1577-9755
review

The Renaissance of Alkali Metabisulfites as SO2 Surrogates

Ashish Kumar Sahoo
,
Anjali Dahiya
,
Amitava Rakshit
,
B.K.P. acknowledges the support of this research by the Department of Science and Technology, Science and Engineering Research Board, India (DST/SERB; EMR/2016/007042) and the Council of Scientific and Industrial Research, India (CSIR; 02(0365)/19/EMR-II). A.K.S., A.D., and A.R. thank IIT Guwahati for Fellowships and for providing necessary facilities.
 


Abstract

The upsurge of interest in the development of methodologies for the construction of sulfur-containing compounds via the use of expedient reagents has established sustainable tools in organic chemistry. This review focuses on sulfonylation reactions using inorganic sulfites (Na2S2O5 or K2S2O5) as the sulfur dioxide surrogates. Compared to the bis-adduct with DABCO, which is an excellent surrogate of gaseous SO2, the use of sodium or potassium metabisulfites as SO2 surrogates are equally efficient. The objective of the current review is to exemplify recent sulfonylation reactions using inorganic sulfites. For better understanding, the review is categorized according to the mode of reactions: transition-metal-catalyzed SO2 insertion, metal-free SO2 insertion, and visible-light-mediated SO2 insertion. All the reactions in each of the sections are illustrated with selected examples with a pertinent explanation of the proposed mechanism.

1 Introduction

2 Outlines of the Reactions Involving SO2 Insertion

2.1 Transition-Metal-Catalyzed SO2 Insertion

2.2 Transition-Metal-Free SO2 Insertion

2.3 Visible-Light-Mediated SO2 Insertion

3 Conclusion and Outlook


#

Biographical Sketches

Zoom Image

Bhisma Kumar Patel (born in August 1965) received his B.Sc (Hons) and M.Sc degrees from Sambalpur University, Odisha, India. He was admitted to IIT Kanpur for his PhD in the research­ group of Prof. S. Ranganathan­ (FNA) (1988–1994). After three years of post-doctoral tenure with Prof. Dr Fritz Eckstein at the Max-Planck Institute for Experimental Medicine (1994–1997), he joined the Department of Chemistry, Indian­ Institute of Technology Guwahati as an Assistant Professor in April 1997, where he was elevated to the post of Full Professor in August 2005, and HAG Professor in September 2011 and continued as the Head of the Department. His current research interests include green chemistry, C–H activation, cross dehydrogenative coupling, metal­-catalyzed/metal-free oxidative functionalization, multi-component reactions and hypervalent iodine mediated organic­ transformations. Altogether 25 students have been awarded PhD degrees under his supervision and his research work has resulted in the publication of 162 research papers in journals of international repute, and three patents.

Zoom Image

Ashish Kumar Sahoo was born in 1994 in Odisha, India. He received his BSc. from Utkal University and M.Sc. and M.Phil. both from North Orissa University, Odisha. He qualified for the CSIR National Eligibility Test & GATE in 2016 and is currently pursuing his doctoral research under the supervision of Prof. Bhisma K. Patel at the Indian Institute of Technology in Guwahati (India). His research primarily focuses on photoredox catalysis and radical-based C–H functionalization.

Zoom Image

Anjali Dahiya was born in 1993 in Haryana, India. She received her BSc (Hons.) and MSc. degrees from Hansraj College, Delhi University in 2013 and 2016 respectively. She qualified for the CSIR National Eligibility Test & GATE in 2016 and is currently pursuing her doctoral research under the supervision of Prof. Bhisma K. Patel at the Indian Institute of Technology in Guwahati (India). Her research interests focus on the development of new sustainable methodologies for the construction of C–C and C–Heteroatom bonds in a one-pot cascade manner.

Zoom Image

Amitava Rakshit was born in 1993 in West Bengal, India. He received his B.Sc. (Hons.) degree from Bankura Christian College, The University of Burdwan in 2014 and MSc. degree from IIT Kharagpur in 2016. He qualified for the CSIR National Eligibility Test & GATE in 2016 and is currently pursuing his doctoral research under the supervision of Prof. Bhisma K. Patel­ at the Indian Institute of Technology in Guwahati (India). His research focuses primarily on nitrile-triggered access of N-heterocycles via thermal and photochemical processes.

1

Introduction

In the past decades, the insertion of sulfone functionality into organic molecules has garnered much attention because of the versatile reactivity and enhanced properties of the generated moieties. Owing to their unique chemical and biological activity, compounds possessing a sulfone backbone are privileged structural motifs in many clinical drugs, natural products and agrochemicals (Figure [1]).[1] [2] [3] In pharmaceuticals, the sulfone moiety has been explored extensively because of the biological activities that it can impart, such as anti-inflammatory, antimicrobial, anticancer, anti-HIV, and antimalarial action. In particular, Vismodegib® is an anti-cancer agent, Adociaquinone® is used for the treatment of breast cancer, and Tinidazole® and Amisulpride® are used as anti-inflammatory and anti-psychotic drugs, respectively (Figure [1]).[4] Besides their use in the medicinal field, sulfone-containing compounds display a wide range of reactivity in the field of synthetic organic chemistry and the moiety can act as a leaving group; therefore, it has been designated as a ‘chemical chameleon’ by Trost.[5]

Zoom Image
Figure 1 Representative active sulfone-containing molecules

Given the various applications of sulfones, synthetic chemists have long attempted to find new pathways to incorporate this important structural motif. Traditional methods used for the synthesis of such scaffold soften require multistep reactions and utilize pre-functionalized sulfonyl compounds such as sulfonyl halides,[6] [7] [8] [9] sulfonyl hydrazines­,[10–13] and sodium sulfinates.[14] [15] [16] To overcome these shortcomings, chemists started to explore various sulfur dioxide surrogates as the source of sulfur dioxide in the sulfonylation reactions. With the use of sulfur dioxide surrogates, it is possible to avoid the problem of handling toxic, gaseous sulfur dioxide. The reagent 1,4-diazabicyclo[2.2.2]octane-sulfur dioxide (DABSO or [DABCO·(SO2)2]) was reported by Willis et al. as the first sulfur dioxide surrogate­ in a palladium-catalyzed amino sulfonylation reaction.[17] In 1988, Santos and Mello reported DABCO·(SO2)2 as a stable and innocuous reagent.[18] However, the synthesis of DABCO·(SO2)2 is performed at –78 °C using gaseous sulfur dioxide. Moreover, the process is neither atom-economic nor cost-effective as a large excess of 1,4-diazabicyclo[2.2.2]octane (DABCO) is used during the reaction. Although the application of DABCO·(SO2)2 in sulfonylation reactions has developed rapidly in the past few years, chemists still strive to find an alternative to DABSO, which can be utilized as a better sulfur dioxide surrogate.[19] In this perspective, the use of inorganic sulfites such as K2S2O5 or Na2S2O5 is demonstrated to be attractive and to offer suitable alternative sulfur dioxide surrogates for the synthesis of sulfonylated compounds. Such inorganic sulfites are inexpensive, readily available, and environmentally benign, providing an atom-economic route for the synthesis of an array of sulfonyl compounds, including sulfones and sulfonamides. Indeed, more reports using inorganic sulfites as the source of sulfur dioxide have started appearing.[20] Sulfonylation reactions utilizing these alkali metabisulfites could be performed under transition-metal catalysis or through a radical process under metal or additive-free conditions. In some cases, a photocatalyst is necessary to promote the reaction under visible-light irradiation. Although some aspects of this fast-developing area has been covered in a few reviews, the primary objective of the present review is to bring the latest uses of alkali metabisulfites to the fore.[21] [22] For convenience, this review is divided into three categories based on the SO2 insertion strategy during the sulfonylation reaction: (i) transition-metal-catalyzed SO2 insertion; (ii) transition-metal-free SO2 insertion; and (iii) visible-light-mediated SO2 insertion.


# 2

Outlines of the Reactions Involving SO2 Insertion­

2.1

Transition-Metal-Catalyzed SO2 Insertion

Although several methodologies have been developed for SO2 insertions, the transition-metal-catalyzed SO2 insertion is still in demand due to its remarkable catalytic activity and better selectivity.[23]

Sulfonamides are found in many pharmaceuticals and biologically active compounds and hence the development of new methodologies is deemed worthy.[24] A three-component reaction of an arylboronic acid, nitroarene (1), and potassium metabisulfite under copper catalysis was established by Wu et al. yielding a variety of sulfonamides. Various functional groups including hydroxy-, cyano-, amino- and carbonyl were well tolerated in this strategy (Scheme [1]).[25]

Zoom Image
Scheme 1 Synthesis of phenyl N-aryl sulfonamides using nitrobenzene and boronic acids

According to the mechanism (Scheme [2]), the copper-catalyzed addition of K2S2O5 with an aryl boronic acid generates an arylsulfinate intermediate (d). Further, a copper-assisted nucleophilic interaction of intermediate (e) with nitroarene (1) gives rise to intermediate (1e) followed by protonation to afford intermediate (1f). The intermediate (1f) undergoes reduction with isopropanol, producing a sulfonyl hydroxylamine (1g), which, on further reduction, affords the final product 2.

Zoom Image
Scheme 2 Proposed mechanism for the formation of phenyl N-aryl sulfonamide derivatives

A similar approach was reported by Wu et al. for the synthesis of sulfonamides 4, which proceeds via a Pd-catalyzed coupling of aryl halides 3, hydrazines, and potassium metabisulfite. Both aryl iodides, as well as aryl bromides, reacted smoothly under identical reaction conditions. However, aryl chlorides and alkyl halides were demonstrated not to be substrates in this conversion (Scheme [3]).[26]

Zoom Image
Scheme 3 Synthesis of sulfonamides using aryl halides

In 2019, the Ramon group demonstrated a copper-catalyzed synthesis of sulfonamides 6 from triaryl bismuthines 5, sodium metabisulfite, and nitro compounds as the amino source in a deep eutectic solvent. It was found that substrates containing neutral, electron-withdrawing, and electron-donating substituents all gave products in moderate to good yields. The reaction was successful for the aliphatic nitrocyclohexane­, although a lower yield of the desired product was obtained (Scheme [4]).[27]

Zoom Image
Scheme 4 Synthesis of phenyl N-aryl sulfonamide derivatives using nitrobenzene­

Manabe et al. in 2017, demonstrated an elegant method for the synthesis of sulfonamides 8 and sulfinamides 8′ from heteroarenes 7 bearing an amino group and K2S2O5 as the SO2 surrogate. In this protocol, the selectivity is governed by the nature of the ligand and the equivalents of the base used. The protocol covers a wide range of cyclic amines with good functional group tolerance. From the mechanistic investigations, the group confirmed the generation of sulfonamides, which are converted into sulfonamides in the presence of ≤1.0 equiv of the base. In the process, sulfinamides are produced through an unprecedented insertion of sulfur monoxide, and products were obtained via oxidation using an iodide/DMSO combination. The presence of iodide and DMSO is vital for the successful conversion of sulfinamides into sulfonamides (Scheme [5]).[28]

Zoom Image
Scheme 5 Synthesis of cyclic sulfonamides

Recently, Jiang and co-workers reported a similar multi-component approach for the reductive coupling of sodium metabisulfite (Na2S2O5), 4-iodotoluene (9), and n-butyl bromide in the presence of a Pd-catalyst and potassium hydrogen phosphate. Important features of this protocol are the broad substrate scope, tolerance of various functional groups, simple and cheap coupling partner, and high yields of the products (Scheme [6]).[29]

Zoom Image
Scheme 6 Synthesis of sulfonyl derivatives using alkyl bromides as the coupling partner

From the control experiments performed, a suitable mechanism was proposed. Initially, the n-butyl radical is generated via a single-electron transfer between alkyl halide and tin, which reacts with sodium metabisulfite to give sulfonyl intermediate (a). The intermediate (a) undergoes reduction with tin, giving sulfonyl anion intermediate (b). Intermediate (b) then reacts with intermediate 9a (generated via the oxidative addition of Pd(0) and aryl halide) to give intermediate 9c. Reductive elimination of intermediate 9c provides the sulfonylated product 10 (Scheme [7]).

Zoom Image
Scheme 7 Proposed mechanism for the formation of aryl alkyl sulfones

Since methyl sulfones are privileged scaffolds in many pharmaceuticals, synthesis of such molecules has attracted considerable attention.[21] For example, Vismodegib® (Figure [1]) is a basal-cell carcinoma treatment that was first explored by Roche. Xiidra® (Figure [2]) has been applied for dry eye disease as an ophthalmic solution.[30]

Zoom Image
Figure 2 Sulfone-containing drug Xiidra®

An elegant synthesis of β-methylsulfonylated N-heterocycles (12 or 12′) via FeCl3-catalyzed C(sp3)–H dehydrogenation and C(sp2)–H methylsulfonylation of unactivated cyclic amines using sodium metabisulfite and dicumyl peroxide (DCP) has been demonstrated by the Fan group. However, in this method, DCP serves as an oxidant as well as a methyl radical source to generate a methyl sulfonyl radical. This protocol provided several β-methylsulfonylated tetrahydropyridines, tetrahydroazepines, and pyrroles in one-pot (Scheme [8]).[31]

Zoom Image
Scheme 8 Synthesis of β-methylsulfonylated N-heterocycles

In the proposed mechanism, the methyl radical initially generated from DCP is captured by sulfur dioxide to give a methylsulfonyl radical (a) along with the formation of acetone. Meanwhile, compound 11 is oxidized by Fe(III) to deliver a radical cation intermediate 11a, which undergoes dehydrogenation to produce an iminium intermediate 11b and PhC(Me)2OH. Subsequently, enamine intermediate 11c is generated via β-hydrogen abstraction by DABCO or PhC(Me)2O. Next, the methylsulfonyl radical intermediate A undergoes addition with the enamine intermediate 11c to provide intermediate 11d, which, upon Fe(III)-promoted oxidation, gives cationic species 11e. The final product 12 is obtained upon loss of a proton (Scheme [9]).

Zoom Image
Scheme 9 Proposed mechanism for the formation of aryl alkyl sulfones

Similarly, Jiang et al. demonstrated an efficient method for the synthesis of methyl sulfones 14 involving a three-component cross-coupling protocol of boronic acid 13, sodium­ metabisulfite, and dimethyl carbonate. Important features of the reaction include a wide range of substrate scope, and good functional group tolerance Among the various ligands tested, it was found that electron-rich and sterically hindered phosphine ligands are more suitable for the desired conversion (Scheme [10]).[32]

Zoom Image
Scheme 10 Synthesis of sulfonyl derivatives using dimethyl carbonate as the methylating agent

Synthesis of o-substituted diaryl sulfones 16 via a multicomponent reaction of arylboronic acid 15, potassium metabisulfite, and diaryliodonium salt was demonstrated by Tu et al. in 2019 using an acenaphthoimidazolylidene gold complex as the catalyst (Scheme [11]).[33] The sterically hindered aryl groups in diaryliodonium salts are preferentially transformed over less bulky ones during the process, which might be due to the better stability of the bulky Ar+ formed from diaryliodonium salt. A wide variety of diaryl sulfones could be obtained using various arylboronic acids and aryldiazonium salts.

Zoom Image
Scheme 11 Synthesis of diaryl sulfones using boronic acid and di­aryliodonium salts

According to the proposed mechanism, initial transmetalation of NHC-Au(I) with arylboronic acid 15 provides NHC-Au-Ar species 15a. This is then followed by the insertion of SO2 to provide a sulfonyl Au(I) complex 15b. The NHC-AuSO2-Ar (15b), furnishes an aryl sulfonyl radical intermediate 15c in the presence of base. The combination of intermediate 15c with the more stable bulky Ar+ species (a), generated from diaryliodonium salt, affords the sterically hindered diaryl sulfone 16 (Scheme [12]).

Zoom Image
Scheme 12 Proposed mechanism for the formation of diaryl sulfones

By utilizing the same SO2 insertion strategy, the Jiang group reported a method for the synthesis of diarylannulated sulfones 18 and 18′ using Na2S2O5 as SO2 surrogate. The diarylannulated sulfones were synthesized via SO2/I exchange of iodonium (III) salts 17. By this protocol, a new type of OLED material was synthesized on gram scale with good functional group tolerance, permitting a broad range of substrate scope (Scheme [13]).[34]

Zoom Image
Scheme 13 Synthesis of diaryl annulated sulfones

Often, compounds having a furan2(5H)-one backbone have high biological activity.[35a] For example, Rofecoxib® (Figure [3]) is an anti-inflammatory drug launched by Merck and approved by the US FDA.[35b] Several 4-aryl-3methyl-furan-2(5H)-ones are effective in controlling fungal diseases in plants of agronomic importance.[36] In this context, Wu et al. in 2019 demonstrated a method in which 4-sulfonylated furan-2(5H)-ones 20 are formed by a three-component reaction of 2,3-allenoic acids 19, sulfur dioxide, and aryldi­azonium tetrafluoroborates in the presence of a copper catalyst. The method utilizes both DABSO and Na2S2O5 as the SO2 source. Mild reaction conditions, as well as tolerance of various functional groups, such as nitro groups and esters, as well as broad substrate scope are the important features of the protocol. However, steric effects in the aryl diazonium salt greatly affect the outcome, giving a downward trend in the yield of the product (Scheme [14]).[37]

Zoom Image
Figure 3 Rofecoxib® an anti-inflammatory drug
Zoom Image
Scheme 14 Synthesis of 4-sulfonylated furan-2(5H)-ones

Based on literature precedent, the proposed mechanism involves the generation of an aryl radical via single-electron transfer of an aryl diazonium tetrafluoroborate with Cu(I). This radical then reacts with SO2 obtained from Na2S2O5, affording an aryl sulfonyl radical intermediate (a). The C-central position of 2,3-allenoic acid 19 is then attacked by the aryl sulfonyl radical (a) to give intermediate 19a, which is transformed into intermediate 19b, assisted by the copper(II) catalyst. Subsequently, the intermediate 19b undergoes intramolecular nucleophilic attack by the carboxylate anion in the presence of a base, leading to 4-sulfonylated furan-2(5H)-one (20) (Scheme [15]).

Zoom Image
Scheme 15 Proposed mechanism for the formation of 4-sulfonylated furan-2(5H)-ones

Alkyl nitriles are present in various natural products and pharmaceuticals.[38] Moreover, cyanoalkyl groups can be readily converted into other useful functional groups such as esters, amides, carboxyls, and tetrazoles.[39] Similarly, oxindoles are privileged scaffolds in many drugs and biologically active compounds.[40] Liu’s group demonstrated an iron-catalyzed protocol for the synthesis of cyanoalkyl sulfonylated oxindoles 22 from activated olefins 21 and cyclic keto oximes via C–C single-bond insertion of sulfur dioxide. The method does not require any additional base or oxidant, which is one of the main advantages of the protocol (Scheme [16]).[41]

Zoom Image
Scheme 16 Synthesis of 3-cyanoalkyl sulfonylated oxindoles

Based on literature precedent and on experimental results, a mechanism for the iron-catalyzed radical cyano­alkylsulfonylation/arylation of active olefins was proposed (Scheme [17]). Initially, the oxime ester (a) undergoes SET reduction by Fe(II) to give an iminyl radical intermediate (b), which forms intermediate (c) via cleavage of the C–C bond. Subsequently, the intermediate (c) is captured by the SO2 generated from K2S2O5, to provide another intermediate (d). Next, the radical intermediate (d) attacks the C–C bond of acrylamide (21) to provide intermediate 21d, which undergoes intramolecular cyclization to give intermediate 21e. Finally, SET oxidation of intermediate 21e by Fe(III) followed by 4-(trifluoromethyl)benzoate ion assisted deprotonation gives the final product 22 and regenerates Fe(II) for the next catalytic cycle.

Zoom Image
Scheme 17 Proposed mechanism for the formation of 3-cyanoalkylsulfonylated oxindoles

In 2021 Yu et al. demonstrated an iron-catalyzed SO2 insertion between 2,3-allenoic acids 23 and cyclobutanone oxime esters using K2S2O5 as the SO2 surrogate (Scheme [18]).[42] During the reaction, ring-opening of the cyclobutanone oxime ester produces a cyanoalkyl radical, which is followed by a radical tandem cyclization providing cyano­alkylsulfonylated butenolides 24.

Zoom Image
Scheme 18 Cyanoalkylsulfonylation of 2,3-allenoic acids

The suggested mechanism involves the reduction of the cycloketone oxime ester by Fe(II) via SET, leading to the formation of an iminyl radical (a) through N–O bond cleavage. Subsequently, the C–C bond cleavage of intermediate (a) gives an alkyl radical species (b), which, in combination with sulfur dioxide from K2S2O5, provides a sulfonyl radical intermediate (c). This is then followed by the addition to allenoic acid 23 to form intermediate 23c. The intermediate 23c undergoes oxidation in the presence of the Fe(III) catalyst to provide allylic cation 23d. Finally, the cyclized product 24 is obtained via intramolecular nucleophilic attack (Scheme [19]).

Zoom Image
Scheme 19 Proposed mechanism for the cyanoalkylsulfonylation of 2,3-allenoic acids

# 2.2

Transition-Metal-Free SO2 Insertion

Although transition-metal-catalyzed SO2 insertion has gained considerable attention, the development of efficient and practical protocols for the direct introduction of sulfonyl group in the absence of a transition-metal catalyst is an attractive approach. The introduction of a sulfonyl group under transition-metal-free conditions is a challenging task.[43]

A metal-free multi-component strategy was disclosed by Wu et al. for the synthesis of nitrile-containing sulfones 26 using aryldiazonium tetrafluoroborates 25, and 3-azido-2-methylbut-3-en-2-ol with sodium metabisulfite as the sulfur dioxide surrogate (Scheme [20]).[44]

Zoom Image
Scheme 20 Synthesis of nitrile-containing sulfones

A plausible mechanism for this sulfonylation process is described in Scheme [21]. Initially, aryl sulfonyl radical 25a is generated in situ by the reaction of aryldiazonium tetrafluoroborate 25 and sodium metabisulfite. Further, the addition of aryl sulfonyl radical 25a to 3-azido-2-methylbut-3-en-2-ol gives the radical intermediate 25b, which subsequently releases N2, generating a nitrogen-centered radical 25c. The radical intermediate 25c provides arylsulfonylacetonitrile 26 via C–C bond cleavage, along with a ketyl radical (a), which, upon loss of a proton, forms acetone as the sole by-product.

Zoom Image
Scheme 21 Proposed mechanism for the formation of nitrile-containing sulfones

Vinyl sulfones are found in many natural products and pharmaceuticals.[45] The reactivity of α,β-unsaturated sulfones leads to various organic transformations via nucleophilic addition, radical addition, and cycloaddition. A metal-free, three-component reaction protocol involving propargyl alcohol 27, sodium metabisulfite, and aryldiazonium tetrafluoroborates was demonstrated by Wu et al. in 2020 (Scheme [22]).[46] The reaction proceeds efficiently at room temperature in the absence of catalyst, providing E-vinyl sulfones 28 in moderate to good yields. The approach involves a vinyl radical-induced 1,5-hydrogen atom transfer and functional group migration, resulting in sequential cleavage of inert C–H and C–C bonds, respectively. Aryldi­azonium tetrafluoroborates bearing electron-donating or electron-withdrawing groups on the aromatic ring worked smoothly in this transformation, providing the desired products 28 in moderate to good yields. Besides this, a wide variety of propargyl alcohols was also successful (Scheme [22]).

Zoom Image
Scheme 22 Synthesis of vinyl sulfones

In the proposed mechanism, an aryl sulfonyl radical intermediate (a) is generated from the aryl diazonium salt and Na2S2O5. Radical addition of intermediate (a) to alkyne 27 provides intermediate 27a, which, upon 1,5-[H] shift, gives intermediate 27b. The intermediate 27b undergoes radical cyclization followed by SET and deprotonation to give product 28 (Scheme [23]).

Zoom Image
Scheme 23 A tentative mechanism for the formation of vinyl sulfones

Recently, an elegant method for the synthesis of aryl sulfones was reported by Wu et al. The method offers a range of (arylsulfonyl)methylbenzenes 30 via a multicomponent reaction of electron-rich arenes 29, potassium metabisulfite, aromatic aldehydes, and aryldiazonium tetrafluoroborates in the presence of formic acid (Scheme [24]).[47] The reaction proceeds very well under mild reaction conditions with broad substrate scope tolerating various functional groups.

Zoom Image
Scheme 24 Synthesis of aryl sulfones using aromatic aldehydes and aryl diazonium salts

According to the proposed mechanism, condensation of 1,3,5-trimethoxybenzene (29) with an aldehyde in the presence of formic acid generates cationic intermediate 29a. Aryldiazonium tetrafluoroborate reacts with potassium metabisulfite, leading to an arylsulfonyl radical intermediate (b) that attacks intermediate 29a to provide a radical cation 29c. Subsequently, deprotonation via SET affords product 30 (Scheme [25]).

Zoom Image
Scheme 25 A plausible mechanism for the formation of aryl sulfones

Five-membered sulfur heterocycles have a major presence in medicinal chemistry and materials sciences.[48] In this regard, Larionov et al. in 2018 reported an efficient method for the synthesis of 3-sulfolenes 32 or 32′ from 1,3-dienes 31 or allylic alcohols 31′ with sodium metabisulfite as the SO2 surrogate. Most of the sulfolenes were obtained in good to excellent yields when carried out in HFIP or with KHSO4 in methanol. Broad substrate scope, good product yield, gram-scale synthesis, and metal-free conditions are some noteworthy features of this protocol (Scheme [26]).[49]

Zoom Image
Scheme 26 Synthesis of 3-sulfolenes using 1,3-dienes

Sulfonyl fluorides have gained importance and attracted attention due to their unique reactivity and stability. In addition, sulfonyl fluorides are also used in place of sulfonyl chloride for the synthesis of sulfonylated compounds.[50] Inspired by this, Lu and co-workers established a method for the formation of aryl sulfonyl fluorides 34 from arene diazonium salts 33 using sodium metabisulfite as the SO2 source (Scheme [27]).[51] Aryl diazonium salts possessing electron-donating, as well as electron-withdrawing substituents, performed well in this transformation. Furthermore, several heteroaromatic diazo compounds reacted smoothly under identical reaction conditions to give the corresponding sulfonyl fluorides. Using this protocol, a copper-free Sandmeyer fluorosulfonylation was established.

Zoom Image
Scheme 27 Synthesis of aryl sulfonyl fluorides

According to the proposed mechanism, the aryl diazonium salt undergoes SET to give an aryl radical 33a that then captures SO2 from the sodium metabisulfite to give the aryl sulfonyl radical intermediate 33b. The radical intermediate 33b then reacts with the fluoride radical obtained from Selectfluor­®, affording the desired product 34. In this protocol, sodium metabisulfite serves the dual role of reductant and SO2 source, enabling this copper-free Sandmeyer-type fluorosulfonylation (Scheme [28]).

Zoom Image
Scheme 28 Proposed mechanism for the formation of aryl sulfonyl fluorides

Radical difunctionalization of alkenes and alkynes is an interesting approach to introduce two functional groups simultaneously.[52] Singh et al. in 2020 reported an efficient method for the synthesis of β-ketosulfones 36 and 36′ via a multicomponent reaction of alkenes or alkynes, aryldiazonium salts 35, and SO2 derived from K2S2O5 under transition-metal-free conditions. The strategy is equally successful for phenyl acetylenes and styrenes bearing electron-withdrawing as well as electron-donating groups (Scheme [29]).[53]

Zoom Image
Scheme 29 Synthesis of β-ketosulfones

Similarly, Wu et al. reported a four-component reaction of aryldiazonium salts 37, sulfur dioxide, alkenes, and hydroxylamine. The methodology utilized both DABCO∙(SO2)2 and K2S2O5 as the SO2 surrogate, which underwent a smooth reaction both with aryl diazonium salts and styrenes (Scheme [30]).[54]

Zoom Image
Scheme 30 Vicinal difunctionalization of alkenes via SO2 insertion

Sulfonamide synthesis via a metal-free approach is challenging for synthetic chemists. In this regard, Wu et al. in 2021 developed a multicomponent reaction involving nitroarenes 39, arylboronic acids, and potassium metabisulfite, leading to the formation of sulfonamides 40. A noteworthy feature of this protocol is that it is transition-metal-free, and exhibits broad functional group tolerance. A range of sulfonamides bearing different reactive functional groups was obtained in good to excellent yields (Scheme [31]).[55]

Zoom Image
Scheme 31 Metal-free synthesis of sulfonamides

The mechanism shown in Scheme [32] involves decomposition of K2S2O5, resulting in formation of SO2, which undergoes nucleophilic addition with the arylboronic acid to form benzenesulfinate (a). Subsequently, nucleophilic addition of (a) to nitroarene 39 generates intermediate 39a, which couples with another molecule of SO2 to provide intermediate 39b. In the presence of K2CO3, intermediate 39b eliminates SO4 2– to give intermediate 39c. Subsequently, addition of SO2 followed by elimination of SO4 2– provides the desired sulfonamide 40 via the intermediacy of 39d.

Zoom Image
Scheme 32 Proposed mechanism for the formation of sulfonamides

Quinolines are an important class of heterocycles with diverse biological and pharmacological properties.[56] In this context, quinoline N-oxides are valuable starting materials for different transformations to provide functionalized quinolines. Recently, Xia and co-workers developed a metal-free, three-component reaction of quinoline N-oxides 41, sodium metabisulfite, and aryldiazonium tetrafluoro­borates via a radical process to give 2-sulfonyl quinolones/ isoquinolines 42 (Scheme [33]).[57] In this approach, aryldiazonium tetrafluoroborates bearing p-substituents were more efficient than those bearing m- and o-substituents. This might be due to steric effects. On the other hand, aryldiazonium tetrafluoroborates bearing electron-donating groups reacted better than those bearing electron-withdrawing groups. Besides this, a variety of quinoline N-oxides and isoquinoline N-oxides worked well in this methodology.

Zoom Image
Scheme 33 Metal-free synthesis of 2-sulfonyl quinolones/isoquinolines

In the proposed mechanism (Scheme [34]), the aryldiazonium tetrafluoroborate undergoes thermal decomposition to give an aryl radical (a) that combines with SO2 obtained from sodium metabisulfite to provide an aryl sulfonyl radical (b). Then addition of (b) to quinoline N-oxide 41 via a Minisci-like radical transformation generates an O-radical intermediate 41b that captures another aryl sulfonyl radical to give intermediate 41c. Finally, elimination of aryl sulfonic acid from intermediate 41c affords the corresponding 2-sulfonyl quinolines 42.

Zoom Image
Scheme 34 Proposed mechanism for the formation of 2-sulfonyl quinolones

In 2020, Ramon et al. developed a catalyst-free methodology for the multicomponent synthesis of sulfones, di­sulfides, and sulfides using non-toxic triarylbismuthines (Ar3Bi) (43) and sodium metabisulfite in a deep eutectic solvent (DES) (Scheme [35]).[58] The use of DES helped to solubilize all reagents, thereby, enhancing their reactivity. A variety of electrophiles and nucleophiles in the synthesis of sulfones and sulfide worked well.

Zoom Image
Scheme 35 Synthesis of sulfones and sulfides in deep eutectic solvents

In 2018, Jiang et al. demonstrated a metal-free synthesis of sulfonamides 46 via a three-component reaction involving sodium metabisulfite, sodium azide, and aryl diazonium salts 45 (Scheme [36]).[59]

Zoom Image
Scheme 36 Synthesis of primary sulfonamides

The mechanism for the formation of the product 46 is depicted in Scheme [37]. The process involves the generation of an aryl radical intermediate (a) via SET between the aryl diazonium salt and triphenylphosphine. Then the SO2 combines with the aryl radical intermediate (a) to give an aryl sulfonyl intermediate 45a, which reacts with the phosphine imine radical (b) and sodium azide to provide intermediate 45c. Subsequent hydrolysis of intermediate 45c affords the product 46 along with the by-product triphenylphosphine oxide.

Zoom Image
Scheme 37 Proposed mechanism for the formation of primary sulfonamides

Previously, the Pan group in 2013 demonstrated a catalyst-free method for the synthesis of sulfonylhydrazides 48 from phenylhydrazines 47 as the aryl source and potassium metabisulfite as the SO2 source. Metal-free, additive-free conditions, readily available starting materials, and low reaction­ temperatures are the merits of this protocol, in which phenylhydrazines bearing both electron-withdrawing and electron-donating groups were well tolerated (Scheme [38]).[60]

Zoom Image
Scheme 38 Synthesis of primary sulfonylhydrazides

In the suggested mechanism, in the presence of O2, phenylhydrazines 47 undergoes two-step deprotonation to give an aryl radical intermediate 47c via the intermediacy of 47a and 47b. Then the intermediate 47c combines with the sulfonyl anionic intermediate (e) (obtained from the reaction of cyclic amine (d) and K2S2O5) to generate an anionic intermediate 47f along with a radical cation 47h via SET. Oxidation of intermediate 47f affords the aryl sulfone radical 47g, and deprotonation of the intermediate 47h provides intermediate 47i. Finally, radical coupling of intermediate 47g and 47i affords the desired product 48 (Scheme [39]).

Zoom Image
Scheme 39 Proposed mechanism for the formation of sufonylhydrazides

In 2018 Jiang et al. developed an efficient method for the synthesis of sulfonamides 50 from readily available nitrobenzenes 49, boronic acids, and Na2S2O5 as the SO2 surrogate. In this protocol sodium metabisulfite (Na2S2O5) serves the role of both activator as well as reductant during sulfonamidation (Scheme [40]).[61]

Zoom Image
Scheme 40 Synthesis of sulfonamides using nitrobenzenes, boronic acids, and Na2S2O5

In the proposed reaction, nitrobenzene (49) reacts with sodium metabisulfite to give intermediate 49a, which is converted into nitrosyl intermediate 49b with the release of Na2SO3 and SO3 (Scheme [41]). Simultaneously, sodium meta­bisulfite acts as an anionic counterpart to activate the C–B bond of boronic acid (a) to afford an SO2 conjugate intermediate (b). The sulfonyl radical intermediate (c) is generated from (b) via 1,5-migration and SET. Subsequently, intermediate 49b and (c) combine to give the nitroso radical intermediate 49d followed by hydrolysis to afford the desired product 50.

Zoom Image
Scheme 41 Proposed mechanism for the formation of N-aryl sulfonamides

In 2020, the Shun-Jun Ji group reported an efficient TFA-promoted, transition-metal-free, multicomponent reaction of aryldiazonium salts 51 with sodium metabisulfite (Na2S2O5) and thiols to construct thiosulfonates 52 (Scheme [42]).[62] The reaction proceeds smoothly with a broad tolerance of functional groups present in the aromatic rings of both the aryldiazonium salts as well as in thiols. Moreover, heteroaromatic and aliphatic thiols are also well tolerated to afford the desired thiosulfonates.

Zoom Image
Scheme 42 Synthesis of thiosulfonates

Based on the proposed mechanism (Scheme [43]) TFA reacts with diazonium salt 51 to generate the corresponding aryl radical 51a. This aryl radical 51a then reacts with Na2S2O5 to give an arylsulfonyl radical intermediate 51b that combines with the sulfur anion to give radical anion intermediate 51c. The radical anion 51c undergoes SET to give the thiosulfonate 52.

Zoom Image
Scheme 43 Proposed mechanism for the formation of thiosulfonates

# 2.3

Visible-Light-Mediated SO2 Insertion

Recently, visible-light-mediated functionalizations have emerged as significant methodologies in contemporary organic chemistry.[63] [64] However, most organic compounds do not absorb visible light efficiently, which limits the application of light-mediated organic synthesis. To overcome this, either a transition-metal complex (complexes of Rh, Ir, Ru) or organic dyes such as eosin Y or rose Bengal are used as sensitizers for the required photochemical transformation.[65,66] As mentioned above, various methods used for SO2 insertion require high temperatures and harsh reaction conditions; hence, there is a need for developing methods for SO2 insertion under milder reaction conditions. In this context, SO2 insertion reaction mediated by visible light either­ in the presence of transition-metal complexes or organic­ dyes as photoredox catalysts has gained a place in organic synthesis.[67] [68]

In 2020 Wu et al. reported a photocatalytic synthesis of alkylalkynyl sulfones 54 through the insertion of sulfur dioxide between potassium alkyltrifluoroborates 53 and alkynyl bromides using sodium metabisulfite (Na2S2O5) as the SO2 source (Scheme [44]).[69] This photoinduced reaction proceeded well at room temperature, had broad substrate scope, and gave the products in moderate to good yields.

Zoom Image
Scheme 44 Visible-light-mediated synthesis of alkylalkynyl sulfones

According to the proposed mechanism (Scheme [45]) an alkyl radical 53a is generated from potassium alkyltrifluoroborate 53 by the influence of the photocatalyst under visible-light irradiation. Subsequently, the sulfur dioxide generated from Na2S2O5 couples with radical 53a to provide alkylsulfonyl radical 53b that then attacks the C–C triple bond of the alkynyl bromide to provide vinyl radical intermediate 53c. Next, SET converts vinyl radical 53c into vinyl anion 53d. Finally, elimination of bromide gives rise to alkylalkynyl sulfone 54.

Zoom Image
Scheme 45 Proposed mechanism for the formation of alkylalkynyl sulfones

Thiosulfonates are useful building blocks in organic synthesis owing to their unusual reactivity and stability.[70] A visible-light-promoted synthesis of thiosulfonates 56 was reported by He et al. using thiols, aryldiazonium salts 55, and sodium metabisulfite under metal-free conditions (Scheme [46]).[71] This mild, three-component reaction utilizes rhodamine 6G as the photocatalyst to provide unsymmetrical thiosulfonates.

Zoom Image
Scheme 46 Visible-light-mediated synthesis of thiosulfonates

Following the proposed mechanism (Scheme [47]), rhodamine 6G (PC) is first excited to an excited species PC* under visible-light irradiation. Then, aryl radical 55a is generated from the aryldiazonium salt 55 via SET with the release of N2 and BF4 . Subsequently, the interaction of aryl radical 55a with Na2S2O5 generates arylsulfonyl radical 55b and Na2SO3. The PC radical cation obtained from the SET process oxidizes the thiol to produce a thiyl radical cation, which is deprotonated by BF4 to produce a thiyl radical (c). Finally, coupling of arylsulfonyl radical 55b with the thiyl radical (c) gave the product 56; whereas homocoupling provided the disulfide.

Zoom Image
Scheme 47 Proposed mechanism for the formation of thiosulfonates

Subsequently, Wu and co-workers reported a photo­induced three-component reaction of aryldiazonium tetrafluoroborates 57, sodium metabisulfite, and thiourea, leading to S-aryl thiosulfonates 58 (Scheme [48]).[72] A variety of aryldiazonium tetrafluoroborates worked well in this transformation. This method was unsuccessful for S-alkyl thiosulfonate preparation because of stability issues with the alkyl diazonium tetrafluoroborates. Moreover, the reaction was unsuccessful for 2-substituted aryldiazonium tetra­fluoroborates. This might be due to the steric hindrance.

Zoom Image
Scheme 48 Visible-light-mediated synthesis of S-aryl thiosulfonates

According to the suggested mechanism (Scheme [49]), initial reaction between thiourea and aryldiazonium tetrafluoroborate 57 generates a salt intermediate 57a, which reacts with Na2S2O5 to give sodium thiophenolate (d), and urea with the release of SO2. In the presence of visible light, the photocatalyst is exited and produces aryl radical 57b from another molecule of aryldiazonium tetrafluoroborate 57 via SET. Aryl radical 57b then reacts with SO2, generated from sodium metabisulfite, giving aryl sulfonyl radical intermediate 57c. Subsequently, thiophenolate anion (d) affords an aryl sulfur radical (e), regenerating the ground-state photocatalyst. Finally, the combination of arylsulfonyl radical 57c with the aryl sulfur radical (e) affords S-aryl thiosulfonate 58.

Zoom Image
Scheme 49 Proposed mechanism for the synthesis of S-aryl thiosulfonates

A Ru(II) photoredox-catalyzed synthesis of α,α-difluoro-β-ketosulfones 60 was reported by Wu et al. in 2020 (Scheme [50]).[73] The reaction involves a three-component coupling of aryldiazonium tetrafluoroborates 59 with sodium metabisulfite and 2,2-difluoroenol silyl ethers under mild conditions. In this conversion, the difluoromethyl group and sulfone moiety can be introduced in a single step.

Zoom Image
Scheme 50 Visible-light-mediated synthesis of α,α-difluoro-β-keto­sulfones

Based on the suggested mechanism as depicted in Scheme [51], initially, aryl radical 59a is generated from the aryldiazonium tetrafluoroborate 59 via SET. Intermediate 59a then reacts with SO2, giving rise to arylsulfonyl radical 59b. Intermediate 59b subsequently attacks the double bond of the difluoroenoxysilane to provide a carbon-centered­ radical intermediate 59c followed by SET with the oxidized photocatalyst, to yield carbocationic intermediate 59d. Finally, the product 60 is formed through a fluoride-mediated desilylation.

Zoom Image
Scheme 51 Proposed mechanism for the formation of α,α-difluoro-β-ketosulfones

In 2017, Manolikakes et al. established a method for the formation of sulfonamides 62 by reacting diaryldiazonium salts 61, Na2S2O5, and hydrazines under visible-light photoredox catalysis. In this reaction, a combination of sodium metabisulfite and acid TFA is used as the SO2 surrogate and perylene (PDI) as the photoredox catalyst. Both aromatic as well as aliphatic hydrazines worked well under identical reaction conditions (Scheme [52]).[74]

Zoom Image
Scheme 52 Synthesis of sulfonamide using PDI as photoredox catalyst

In the proposed mechanism, formation of a stable hydrazine-sulfur dioxide adduct (b) is suggested. Meanwhile PDI* is produced by irradiation of photoredox catalyst PDI. The radical quenching of PDI* with the hydrazine-sulfur dioxide complex (b) forms a radical cation (c), which undergoes deprotonation to give a sulfonyl radical intermediate (d). Simultaneously, aryl radical 61b, generated from the aryl diazonium salt 61 via an electron transfer from PDI radical anion, couples with the sulfonyl radical intermediate (d) to provide the final product 62 (Scheme [53]).

Zoom Image
Scheme 53 Proposed mechanism for the formation of sulfonamides

In 2019, Wu et al. demonstrated an efficient method for the synthesis of 3-(methylsulfonyl)benzo[b]thiophenes 64 by reacting methyl(2-alkynyl phenyl)sulfonates 63 with sodium metabisulfite as the SO2 source in the presence of a Ru complex as the photoredox catalyst and sodium methyl sulfinate as the initiator for the reaction. Low catalyst loading, room temperature reaction and broad substrate scope are important features of the reaction. The protocol was successfully applied using methyl(2-alkynyl phenyl)sulfonates 63, bearing electron-donating and electron-withdrawing groups (Scheme [54]).[75]

Zoom Image
Scheme 54 Synthesis of 3-(methylsulfonyl)benzo[b]thiophenes

In the proposed mechanism, the excited state of the photocatalyst oxidizes methylsulfinate to a methylsulfonyl radical (a) as an initiator via SET. The triple bond of methyl(2-alkynyl phenyl)sulfonate (63) is attacked by the methylsulfonyl radical (a), providing the cyclized product 64 with the release of a methyl radical. The released methyl radical is subsequently captured by sulfur dioxide, to give the methylsulfonyl radical (a). After this, the methylsulfonyl radical (a) reacts with methyl(2-alkynyl phenyl)sulfonate (63) to give product 64, with regeneration of the methyl radical. In this process, the methyl radical relay combined with the insertion of sulfur dioxide provides a useful route towards methylsulfonyl containing compounds (Scheme [55]).

Zoom Image
Scheme 55 Proposed mechanism for the formation of 3-(methylsulfonyl)benzo[b]thiophenes

Wu et al. reported a UV-irradiation mediated synthesis of allylic sulfones 66 by reacting aryl/alkyl halides 65, potassium metabisulfite, and allylic bromides. The desired transformation was successful without any metal or photoredox catalyst. A broad reaction scope covering alkyl and aryl halides was demonstrated, and various sensitive functional groups such as amino and ester groups were well tolerated (Scheme [56]).[76]

Zoom Image
Scheme 56 Visible-light-mediated synthesis of aryl/alkyl sulfonamides

Following the recent trends in C(sp3)–H functionalization for sulfonylation, the Wu group demonstrated a visible-light-mediated sulfonylation of 2,4,6-trimethylphenol (67) using sodium metabisulfite (Na2S2O5) as the SO2 surrogate. Although the result is interesting, the substrate scope was limited and only 4-methyl phenols with a methyl or tert-butyl group attached to the ortho-position are suitable for this transformation. The reactions failed to provide the desired products when 4-methylphenols with other groups attached to the ortho-position were used. However, benzylic C(sp3)–H bond functionalization was achieved under mild conditions and visible-light irradiation by using this protocol (Scheme [57]).[77]

Zoom Image
Scheme 57 Visible-light-mediated benzylic C(sp3)–H sulfonylation of 2,4,6-trialkylphenols

According to the proposed mechanism, an aryl radical (b) is generated from the aryl diazonium salt (a) by the excited Ir(bpy)3, which combines with the sulfonyl radical to provide an arylsulfonyl radical intermediate (c). Meanwhile, phenol 67 undergoes oxidation via a SET to give intermediate 67a, followed by intermolecular hydrogen atom abstraction to give the benzylic radical intermediate 67b. Finally, combination of intermediate 67b and (c) affords the desired product 68 (Scheme [58]).

Zoom Image
Scheme 58 Proposed mechanism for benzylic C(sp3)–H sulfonylation of 2,4,6-trialkylphenols

Alkylnitriles are privileged scaffolds in various natural products and pharmaceuticals and can be readily converted into other useful functional groups, including esters, amides, carboxyls, and tetrazoles. In this context, in 2019, the Wu group demonstrated a method for sulfonylation of alkenes 69 using o-acyl oximes in the presence of Ir(bpy)3 as the photoredox catalyst under visible-light irradiation. A wide range of substrates worked well with good functional group tolerance (Scheme [59]).[78]

Zoom Image
Scheme 59 Visible-light-mediated sulfonylation of o-acyl oximes

Mechanistically, it was suggested that, in the presence of a photocatalyst and visible light, N–O bond cleavage of O-acyloxime (a) provides an iminyl radical intermediate (b), which undergoes ring opening via C–C bond cleavage to give a carbon-centered radical (c). The latter carbon radical is captured by SO2, providing a sulfonyl radical (d), which, on reaction with alkene 69, provides another carbon-centered radical 69d. Subsequently a cationic intermediate 69e is generated from 69d via SET, and is attacked by the nucleo­philic MeOH in the presence of a base to give the desired product 70 (Scheme [60]).

Zoom Image
Scheme 60 Proposed mechanism for sulfonylation of O-acyl oximes

In 2020, Tang and co-workers described a similar protocol in which simultaneous cleavage of two C–C bonds of methylenecyclopropane 71 and cycloketone oxime gave 2-cyanoalkylsulfonylated 3,4-dihydronaphthalenes 72 (Scheme [61]).[79]

Zoom Image
Scheme 61 Visible-light-mediated synthesis of 2-cyanoalkylsulfonyl­ated 3,4-dihydronaphthalenes

In the suggested mechanism, cycloketone oxime (a) undergoes reduction by the excited state photocatalyst [Ru(bpy)3]2+* providing an iminyl radical (b), which undergoes C–C bond cleavage to give a cyanoalkyl radical (c), which is captured by the SO2 to give a cyanoalkyl sulfonyl radical (d). Both the cyanoalkyl intermediate (c), and cyanoalkylsulfonyl radical intermediate (d) are trapped by 1,1-diphenylethylene (p) to give adducts (q) and (r), respectively. The cyanoalkylsulfonyl radical (d) then adds to the C–C double bond of the methylene cyclopropane 71, providing intermediate 71d. The intermediate 71d undergoes ring-opening via another C–C bond cleavage to provide carbon-centered radical 71e. After this, intermediate 71f is generated by an intramolecular cyclization of intermediate 71e, which undergoes SET from [Ru(bpy)3]3+. Deprotonation of intermediate 71f in the presence of a base affords product 72 and, finally, [Ru(bpy)3]3+ reverts to the ground state [Ru(bpy)3]2+ (Scheme [62]).

Zoom Image
Scheme 62 Mechanism for synthesis of 2-cyanoalkylsulfonylated 3,4-dihydronaphthalenes

Recently, N-functionalized pyridinium salts such as Katritzky­’s salt have been found to be effective alkylating agents under photoredox catalytic process for various transformations.[80] In 2019, Wu and co-workers reported the synthesis of β-keto sulfone 74 using Katritzky’s salt as an alkyl radical precursor and potassium metabisulfite as the SO2 surrogate (Scheme [63]).[81] A broad reaction scope, good functional group tolerance including amino, cyano, hydroxy, trifluoromethyl groups and good product yields are the merits of this methodology.

Zoom Image
Scheme 63 Visible-light-mediated synthesis of β-keto sulfones

Following the suggested mechanism, a photoredox excited Ir(III) species generates an alkyl radical (c) through an intermediate (b) from the Katritzky salt (a) via SET. Then sulfur dioxide from potassium metabisulfite combines with the alkyl radical intermediate (c) to give an alkylsulfonyl radical intermediate (d) that is trapped by the silyl enol ether 73, leading to a carbon radical intermediate 73d. In the presence of Ir(IV), this carbon radical intermediate is oxidized to a carbocation species 73e that then undergoes desilylation in the presence of base to afford the corresponding β-keto sulfone 74 (Scheme [64]).

Zoom Image
Scheme 64 Mechanism for synthesis of β-keto sulfones

Use of 4-substituted Hantzsch esters as alkyl radical precursors has been demonstrated and these alkyl units could be readily installed into various substrates.[82] The alkyl radical is generated from the 4-alkyl Hantzsch ester under visible-light irradiation in the presence of a photoredox catalyst through SET. Thus, synthesis of alkynyl sulfones 76 involves the reaction of 4-alkyl Hantzsch esters 75, sodium metabisulfite, and alkynyl bromides under metal-free photoinduced conditions as reported by Wu et al. in 2020 (Scheme [65]).[83] This transformation proceeds smoothly under visible-light irradiation at room temperature, giving rise to the corresponding alkyl alkynyl sulfones 76 in moderate to good yields. Besides this, a broad range of substrate scope with good functional group tolerance are other merits of the methodology.

Zoom Image
Scheme 65 Visible-light-mediated synthesis of alkyl alkynyl sulfones

According to the proposed mechanism, alkyl radical 75b is generated from the 4-alkyl Hantzsch ester 75 in the presence of the photocatalyst under irradiation. The alkyl sulfonyl radical 75d is formed via trapping of sulfur dioxide by the alkyl radical intermediate 75b. Subsequently, addition of alkyl sulfonyl radical 75d to the alkynyl bromide produces vinyl radical intermediate 75e. With the assistance of excited photocatalyst, vinyl anion 75f is formed, which affords the corresponding alkylalkynyl sulfone 76 with the release of bromide anion (Scheme [66]).

Zoom Image
Scheme 66 Mechanism for the synthesis of alkyl alkenyl sulfones

An elegant method for the synthesis of 2-sulfonyl-substituted 9H-pyrrolo[1,2-a]indoles 78 was reported by Xie et al. in 2019 through reaction of aryldiazonium tetrafluoroborates, potassium metabisulfite, and N-propargylindoles 77 under visible-light irradiation (Scheme [67]).[84] The proposed mechanism involves the generation of an aryl radical (a) from the aryldiazonium tetrafluoroborate by the assistance of [Ru(bpy)3]2+* via SET. The aryl radical (a) then reacts with the potassium metabisulfite and captures SO2 to afford aryl sulfonyl radical (b) that then attacks the triple bond of N-propargylindole 77 giving rise to vinyl radical intermediate 77b. This is followed by intramolecular cyclization and generation of cyclic radical intermediate 77c. This cyclic radical intermediate undergoes oxidative SET and generates cationic intermediate 77d, which undergoes deprotonation and isomerization to afford the desired cyclic product 78 (Scheme [67]).

Zoom Image
Scheme 67 Mechanism for synthesis of 2-sulfonyl-substituted 9H-pyrrolo[1,2-a]indoles

#
# 3

Conclusion and Outlook

This review focuses on the recent advancement in sulfonylation reactions using inorganic sulfites as the source of the sulfonyl group. Inorganic sulfites are readily available, easy to manipulate and inexpensive. The use of inorganic sulfites as sulfur dioxide surrogates has proven to be a transformative tool, leading to a diverse range of sulfonyl compounds including sulfones and sulfonamides. The sulfonylation protocols have been achieved under transition-metal catalysis or through metal or additive-free conditions. In some cases, a photocatalyst is utilized, which mediates the reaction in the presence of visible light. Using K2S2O5 or Na2S2O5 as SO2 sources, many substrates were well tolerated under mild conditions. The reactivities of inorganic sulfites in organic reactions deserves to be explored further. The present review shows that only potassium metabisulfite or sodium metabisulfite have been found to be efficient, but these strategies will surely find application in the synthesis of natural products and pharmaceuticals in the immediate future. Considering the great potential of inorganic sulfites in organic synthesis, it is believed that new methodologies involving insertion of sulfur dioxide using inorganic sulfites will be developed.


#
#

Conflict of Interest

The authors declare no conflict of interest.

  • References

  • 1 Bartholow M. Pharmacy Times 2011; 48
  • 2 Drews J. Science 2000; 287: 1960
  • 3 EI-Awa A, Noshi MN, du Jourdin XM, Fuchs PL. Chem. Rev. 2009; 109: 2315
  • 4 Ahmad I. Shagufta Int. J. Pharm. Pharm. Sci. 2015; 7: 19
  • 5 Trost BM, Kalnmals CA. Chem. Eur. J. 2019; 25: 11193
  • 6 Liu X, Cong T, Liu P, Sun P. Org. Biomol. Chem. 2016; 14: 9416
  • 7 Sun K, Chen X.-L, Li X, Qu L.-B, Bi W.-Z, Chen X, Ma H.-L, Zhang S.-T, Han B.-W, Zhao Y.-F, Li C.-J. Chem. Commun. 2015; 51: 12111
  • 8 Liang H, Jiang K, Ding W, Yuan Y, Shuai L, Chen Y, Wei Y. Chem. Commun. 2015; 51: 16928
  • 9 Zhao X, Dimitrijevic E, Dong VM. J. Am. Chem. Soc. 2009; 131: 3466
  • 10 Chen ZZ, Liu S, Hao W.-J, Xu G, Wu S, Miao J.-N, Jiang B, Wang S.-L, Tu S.-J, Li G. Chem. Sci. 2015; 6: 6654
  • 11 Yang Y, Bao Y, Guan Q, Sun Q, Zha Z, Wang Z. Green Chem. 2017; 19: 112
  • 12 Khakyzadeh V, Wang Y, Breit B. Chem. Commun. 2017; 53: 4966
  • 13 Wang Y, Ma L, Ma M, Zheng H, Shao Y, Wan X. Org. Lett. 2016; 18: 5082
  • 14 Tang X, Huang L, Xu Y, Yang J, Wu W, Jiang H. Angew. Chem. Int. Ed. 2014; 53: 4205
  • 15 Xu Y, Zhao J, Tang X, Wu W, Jiang H. Adv. Synth. Catal. 2014; 356: 2029
  • 16 Wu W, Yi S, Yu Y, Huang W, Jiang H. J. Org. Chem. 2017; 82: 1224
  • 17 Nguyen B, Emmet EJ, Willis MC. J. Am. Chem. Soc. 2010; 132: 16372
  • 18 Santos PS, Mello MT. S. J. Mol. Struct. 1988; 178: 121
  • 19 Qiu G, Zhou K, Gao L, Wu J. Org. Chem. Front. 2018; 5: 691
  • 20 Ye S, Yang M, Wu J. Chem. Commun. 2020; 56: 4145
  • 21 Liu J, Zheng L. Adv. Synth. Catal. 2019; 361: 1710
  • 22 Ye S, Qiu G, Wu J. Chem. Commun. 2019; 55: 1013
  • 23 Ye S, Li X, Xie W, Wu J. Eur. J. Org. Chem. 2020; 1274
  • 24 Feng M, Tang B, Liang SH, Jiang X. Curr. Top. Med. Chem. 2016; 16: 1200
  • 25 Wang X, Yang M, Kuang Y, Liu J.-B, Fan X, Wu J. Chem. Commun. 2020; 56: 3437
  • 26 Ye S, Wu J. Chem. Commun. 2012; 48: 10037
  • 27 Marset X, Torregrosa-Crespo J, Martinez-Espinosa R, Guillena G, Ramon DJ. Green Chem. 2019; 21: 4127
  • 28 Konishi H, Tanaka H, Manabe K. Org. Lett. 2017; 19: 1578
  • 29 Meng Y, Wang M, Jiang X. Angew. Chem. Int. Ed. 2020; 59: 1346
  • 30 Giannetti AM, Wong H, Dijkgraaf GJ. P, Dueber EC, Ortwine DF, Bravo BJ, Gould SE, Plise EG, Lum BL, Malhi V, Graham RA. J. Med. Chem. 2011; 54: 2592
  • 31 He Y, Yang J, Liu Q, Zhang X, Fan X. J. Org. Chem. 2020; 85: 15600
  • 32 Wang M, Zhao J, Jiang X. ChemSusChem 2019; 12: 3064
  • 33 Zhu H, Shen Y, Wen D, Le Z.-G, Tu T. Org. Lett. 2019; 21: 974
  • 34 Wang M, Chen S, Jiang X. Org. Lett. 2017; 19: 4916
    • 35a Muddala R, Acosta JA. M, Barbosa LC. A, Boukouvalas J. J. Nat. Prod. 2017; 80: 2166
    • 35b Ehrich EW, Dallob A, Lepeleire ID, Hecken AV, Riendeau D, Yuan W, Porras A, Wittreich J, Seibold JR, Schepper PD, Mehlisch DR, Gertz B. Clin. Pharmacol. Ther. 1999; 65: 336
  • 36 Evidente A, Sparapano L. J. Nat. Prod. 1994; 57: 1720
  • 37 Zhou K, Zhang J, Qiu G, Wu J. Org. Lett. 2019; 21: 275
  • 38 Fleming FF. Nat. Prod. Rep. 1999; 16: 597
  • 39 López R, Palomo C. Angew. Chem. Int. Ed. 2015; 54: 13170
  • 40 Dalpozzo R, Bartoli G, Bencivenni G. Chem. Soc. Rev. 2012; 41: 7247
  • 41 Chen Z, Zhou Q, Wang Q.-L, Chen P, Xiong B, Liang Y, Tang K.-W, Liu Y. Adv. Synth. Catal. 2020; 362: 3004
  • 42 Zheng X, Zhong T, Yi X, Shen Q, Yin C, Zhang L, Zhou J, Chen J, Yu C. Adv. Synth. Catal. 2021; 363: 3359
  • 43 Gong X, Ding Y, Fan X, Wu J. Adv. Synth. Catal. 2017; 359: 2999
  • 44 Yao Y, Yin Z, Chen W, Xie W, He F.-S, Wu J. Adv. Synth. Catal. 2021; 363: 570
  • 45 Palmer JT, Rasnick D, Klaus JL, Brömme D. J. Med. Chem. 1995; 38: 3193
  • 46 He F.-S, Yao Y, Xie W, Wu J. Adv. Synth. Catal. 2020; 362: 4744
  • 47 Huang J, Ding F, Chen Z, Yang G, Wu J. Org. Chem. Front. 2021; 8: 1461
  • 48 The Chemistry of Functional Groups, Supplement S: The Chemistry­ of Sulphur-Containing Functional Groups . Patai S, Rappoport Z. Wiley; Chichester: 1993. doi.org/10.1002/recl.1995114080
  • 49 Dang HT, Nguyen VT, Nguyen VD, Arman HT, Larionov OV. Org. Biomol. Chem. 2018; 16: 3605
  • 50 Mukherjee P, Woroch CP, Cleary L, Rusznak M, Franzese RW, Reese MR, Tucker JW, Humphrey JM, Etuk SM, Kwan SC, am Ende CW, Ball ND. Org. Lett. 2018; 20: 3943
  • 51 Zhong T, Pang M.-K, Chen Z.-D, Zhang B, Weng J, Lu G. Org. Lett. 2020; 22: 3072
  • 52 Lan X.-W, Wang N.-X, Xing Y. Eur. J. Org. Chem. 2017; 5821
  • 53 Kumar M, Ahmed R, Singh M, Sharma S, Thatikonda T, Singh PP. J. Org. Chem. 2020; 85: 716
  • 54 Zhang J, An Y, Wu J. Chem. Eur. J. 2017; 23: 9477
  • 55 Chen K, Chen W, Han B, Chen W, Liu M, Wu H. Org. Lett. 2020; 22: 1841
  • 56 Baraldi PG, NuÇez MC, Morelli A, Falzoni S, Virgilio FD, Romagnoli R. J. Med. Chem. 2003; 46: 1318
  • 57 You G, Xi D, Sun J, Hao L, Xia C. Org. Biomol. Chem. 2019; 17: 9479
  • 58 Saavedra B, Marset X, Guillena G, Ramón DJ. Eur. J. Org. Chem. 2020; 3462
  • 59 Wang M, Fan Q, Jiang X. Green Chem. 2018; 20: 5469
  • 60 Wang Y, Du B, Sha W, Mei H, Han J, Pan Y. Org. Chem. Front. 2017; 4: 1313
  • 61 Li Y, Wang M, Jiang X. Chin. J. Chem. 2020; 38: 1521
  • 62 Huang C.-M, Li J, Wang S.-Y, Ji S.-J. Chem. Lett. 2020; 31: 1923
  • 63 Yoon TP, Ischay MA, Du J. Nat. Chem. 2010; 2: 527
  • 64 Narayanam JM. R, Stephenson CR. J. Chem. Soc. Rev. 2011; 40: 102
  • 65 Speckmeier E, Fuchs PJ. W, Zeitler K. Chem. Sci. 2018; 9: 7096
  • 66 Li H, Cheng Z, Tung C.-H, Xu Z. ACS Catal. 2018; 8: 8237
  • 67 Yadav A, König K, Sharma AK, Singh KN. Org. Chem. Front. 2019; 6: 989
  • 68 Gu L, Jin C, Wang W, He Y, Yang G, Li G. Chem. Commun. 2017; 53: 4203
  • 69 Gong X, Yang M, Liu J.-B, He F.-S, Wu J. Org. Chem. Front. 2020; 7: 938
  • 70 Weidne JP, Block SS. J. Med. Chem. 1964; 7: 671
  • 71 Lv Y, Luo J, Ma Y, Dong Q, He L. Org. Chem. Front. 2021; 8: 2461
  • 72 Gong X, Li X, Xie W, Wu J, Ye S. Org. Chem. Front. 2019; 6: 1863
  • 73 He F.-S, Yao Y, Xie W, Wu J. Chem. Commun. 2020; 56: 9469
  • 74 Liu N.-W, Liang S, Manolikakes G. Adv. Synth. Catal. 2017; 1308
  • 75 Gong X, Wang M, Ye S, Wu J. Org. Lett. 2019; 21: 1156
  • 76 Zhang J, Zhou K, Qiu G, Wu J. Org. Chem. Front. 2019; 6: 36
  • 77 Gong X, Chen J, Lai L, Cheng J, Sun J, Wu J. Chem. Commun. 2018; 54: 11172
  • 78 Zhang J, Li X, Xie W, Ye S, Wu J. Org. Lett. 2019; 21: 4950
  • 79 Liu Y, Wang Q.-L, Chen Z, Li H, Xiong B.-Q, Zhang P.-L, Tang K.-W. Chem. Commun. 2020; 56: 3011
  • 80 He F.-S, Ye S, Wu J. ACS Catal. 2019; 9: 8943
  • 81 Wang X, Kuang Y, Ye S, Wu J. Chem. Commun. 2019; 55: 14962
  • 82 Huang W, Cheng X. Synlett 2017; 28: 148
  • 83 Gong X, Yang M, Liu J.-B, He F.-S, Fan X, Wu J. Green Chem. 2020; 22: 1906
  • 84 Liu Y, Wang Q.-L, Chen Z, Chen P, Tang K.-W, Zhou Q, Xie J. Org. Biomol. Chem. 2019; 17: 10020

Corresponding Author

Bhisma K. Patel
Department of Chemistry, Indian Institute of Technology Guwahati
Guwahati-781039
India   

Publication History

Received: 08 July 2021

Accepted after revision: 03 August 2021

Accepted Manuscript online:
03 August 2021

Article published online:
26 August 2021

© 2021. The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial-License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commercial purposes or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/)

Georg Thieme Verlag KG
Rüdigerstraße 14, 70469 Stuttgart, Germany

  • References

  • 1 Bartholow M. Pharmacy Times 2011; 48
  • 2 Drews J. Science 2000; 287: 1960
  • 3 EI-Awa A, Noshi MN, du Jourdin XM, Fuchs PL. Chem. Rev. 2009; 109: 2315
  • 4 Ahmad I. Shagufta Int. J. Pharm. Pharm. Sci. 2015; 7: 19
  • 5 Trost BM, Kalnmals CA. Chem. Eur. J. 2019; 25: 11193
  • 6 Liu X, Cong T, Liu P, Sun P. Org. Biomol. Chem. 2016; 14: 9416
  • 7 Sun K, Chen X.-L, Li X, Qu L.-B, Bi W.-Z, Chen X, Ma H.-L, Zhang S.-T, Han B.-W, Zhao Y.-F, Li C.-J. Chem. Commun. 2015; 51: 12111
  • 8 Liang H, Jiang K, Ding W, Yuan Y, Shuai L, Chen Y, Wei Y. Chem. Commun. 2015; 51: 16928
  • 9 Zhao X, Dimitrijevic E, Dong VM. J. Am. Chem. Soc. 2009; 131: 3466
  • 10 Chen ZZ, Liu S, Hao W.-J, Xu G, Wu S, Miao J.-N, Jiang B, Wang S.-L, Tu S.-J, Li G. Chem. Sci. 2015; 6: 6654
  • 11 Yang Y, Bao Y, Guan Q, Sun Q, Zha Z, Wang Z. Green Chem. 2017; 19: 112
  • 12 Khakyzadeh V, Wang Y, Breit B. Chem. Commun. 2017; 53: 4966
  • 13 Wang Y, Ma L, Ma M, Zheng H, Shao Y, Wan X. Org. Lett. 2016; 18: 5082
  • 14 Tang X, Huang L, Xu Y, Yang J, Wu W, Jiang H. Angew. Chem. Int. Ed. 2014; 53: 4205
  • 15 Xu Y, Zhao J, Tang X, Wu W, Jiang H. Adv. Synth. Catal. 2014; 356: 2029
  • 16 Wu W, Yi S, Yu Y, Huang W, Jiang H. J. Org. Chem. 2017; 82: 1224
  • 17 Nguyen B, Emmet EJ, Willis MC. J. Am. Chem. Soc. 2010; 132: 16372
  • 18 Santos PS, Mello MT. S. J. Mol. Struct. 1988; 178: 121
  • 19 Qiu G, Zhou K, Gao L, Wu J. Org. Chem. Front. 2018; 5: 691
  • 20 Ye S, Yang M, Wu J. Chem. Commun. 2020; 56: 4145
  • 21 Liu J, Zheng L. Adv. Synth. Catal. 2019; 361: 1710
  • 22 Ye S, Qiu G, Wu J. Chem. Commun. 2019; 55: 1013
  • 23 Ye S, Li X, Xie W, Wu J. Eur. J. Org. Chem. 2020; 1274
  • 24 Feng M, Tang B, Liang SH, Jiang X. Curr. Top. Med. Chem. 2016; 16: 1200
  • 25 Wang X, Yang M, Kuang Y, Liu J.-B, Fan X, Wu J. Chem. Commun. 2020; 56: 3437
  • 26 Ye S, Wu J. Chem. Commun. 2012; 48: 10037
  • 27 Marset X, Torregrosa-Crespo J, Martinez-Espinosa R, Guillena G, Ramon DJ. Green Chem. 2019; 21: 4127
  • 28 Konishi H, Tanaka H, Manabe K. Org. Lett. 2017; 19: 1578
  • 29 Meng Y, Wang M, Jiang X. Angew. Chem. Int. Ed. 2020; 59: 1346
  • 30 Giannetti AM, Wong H, Dijkgraaf GJ. P, Dueber EC, Ortwine DF, Bravo BJ, Gould SE, Plise EG, Lum BL, Malhi V, Graham RA. J. Med. Chem. 2011; 54: 2592
  • 31 He Y, Yang J, Liu Q, Zhang X, Fan X. J. Org. Chem. 2020; 85: 15600
  • 32 Wang M, Zhao J, Jiang X. ChemSusChem 2019; 12: 3064
  • 33 Zhu H, Shen Y, Wen D, Le Z.-G, Tu T. Org. Lett. 2019; 21: 974
  • 34 Wang M, Chen S, Jiang X. Org. Lett. 2017; 19: 4916
    • 35a Muddala R, Acosta JA. M, Barbosa LC. A, Boukouvalas J. J. Nat. Prod. 2017; 80: 2166
    • 35b Ehrich EW, Dallob A, Lepeleire ID, Hecken AV, Riendeau D, Yuan W, Porras A, Wittreich J, Seibold JR, Schepper PD, Mehlisch DR, Gertz B. Clin. Pharmacol. Ther. 1999; 65: 336
  • 36 Evidente A, Sparapano L. J. Nat. Prod. 1994; 57: 1720
  • 37 Zhou K, Zhang J, Qiu G, Wu J. Org. Lett. 2019; 21: 275
  • 38 Fleming FF. Nat. Prod. Rep. 1999; 16: 597
  • 39 López R, Palomo C. Angew. Chem. Int. Ed. 2015; 54: 13170
  • 40 Dalpozzo R, Bartoli G, Bencivenni G. Chem. Soc. Rev. 2012; 41: 7247
  • 41 Chen Z, Zhou Q, Wang Q.-L, Chen P, Xiong B, Liang Y, Tang K.-W, Liu Y. Adv. Synth. Catal. 2020; 362: 3004
  • 42 Zheng X, Zhong T, Yi X, Shen Q, Yin C, Zhang L, Zhou J, Chen J, Yu C. Adv. Synth. Catal. 2021; 363: 3359
  • 43 Gong X, Ding Y, Fan X, Wu J. Adv. Synth. Catal. 2017; 359: 2999
  • 44 Yao Y, Yin Z, Chen W, Xie W, He F.-S, Wu J. Adv. Synth. Catal. 2021; 363: 570
  • 45 Palmer JT, Rasnick D, Klaus JL, Brömme D. J. Med. Chem. 1995; 38: 3193
  • 46 He F.-S, Yao Y, Xie W, Wu J. Adv. Synth. Catal. 2020; 362: 4744
  • 47 Huang J, Ding F, Chen Z, Yang G, Wu J. Org. Chem. Front. 2021; 8: 1461
  • 48 The Chemistry of Functional Groups, Supplement S: The Chemistry­ of Sulphur-Containing Functional Groups . Patai S, Rappoport Z. Wiley; Chichester: 1993. doi.org/10.1002/recl.1995114080
  • 49 Dang HT, Nguyen VT, Nguyen VD, Arman HT, Larionov OV. Org. Biomol. Chem. 2018; 16: 3605
  • 50 Mukherjee P, Woroch CP, Cleary L, Rusznak M, Franzese RW, Reese MR, Tucker JW, Humphrey JM, Etuk SM, Kwan SC, am Ende CW, Ball ND. Org. Lett. 2018; 20: 3943
  • 51 Zhong T, Pang M.-K, Chen Z.-D, Zhang B, Weng J, Lu G. Org. Lett. 2020; 22: 3072
  • 52 Lan X.-W, Wang N.-X, Xing Y. Eur. J. Org. Chem. 2017; 5821
  • 53 Kumar M, Ahmed R, Singh M, Sharma S, Thatikonda T, Singh PP. J. Org. Chem. 2020; 85: 716
  • 54 Zhang J, An Y, Wu J. Chem. Eur. J. 2017; 23: 9477
  • 55 Chen K, Chen W, Han B, Chen W, Liu M, Wu H. Org. Lett. 2020; 22: 1841
  • 56 Baraldi PG, NuÇez MC, Morelli A, Falzoni S, Virgilio FD, Romagnoli R. J. Med. Chem. 2003; 46: 1318
  • 57 You G, Xi D, Sun J, Hao L, Xia C. Org. Biomol. Chem. 2019; 17: 9479
  • 58 Saavedra B, Marset X, Guillena G, Ramón DJ. Eur. J. Org. Chem. 2020; 3462
  • 59 Wang M, Fan Q, Jiang X. Green Chem. 2018; 20: 5469
  • 60 Wang Y, Du B, Sha W, Mei H, Han J, Pan Y. Org. Chem. Front. 2017; 4: 1313
  • 61 Li Y, Wang M, Jiang X. Chin. J. Chem. 2020; 38: 1521
  • 62 Huang C.-M, Li J, Wang S.-Y, Ji S.-J. Chem. Lett. 2020; 31: 1923
  • 63 Yoon TP, Ischay MA, Du J. Nat. Chem. 2010; 2: 527
  • 64 Narayanam JM. R, Stephenson CR. J. Chem. Soc. Rev. 2011; 40: 102
  • 65 Speckmeier E, Fuchs PJ. W, Zeitler K. Chem. Sci. 2018; 9: 7096
  • 66 Li H, Cheng Z, Tung C.-H, Xu Z. ACS Catal. 2018; 8: 8237
  • 67 Yadav A, König K, Sharma AK, Singh KN. Org. Chem. Front. 2019; 6: 989
  • 68 Gu L, Jin C, Wang W, He Y, Yang G, Li G. Chem. Commun. 2017; 53: 4203
  • 69 Gong X, Yang M, Liu J.-B, He F.-S, Wu J. Org. Chem. Front. 2020; 7: 938
  • 70 Weidne JP, Block SS. J. Med. Chem. 1964; 7: 671
  • 71 Lv Y, Luo J, Ma Y, Dong Q, He L. Org. Chem. Front. 2021; 8: 2461
  • 72 Gong X, Li X, Xie W, Wu J, Ye S. Org. Chem. Front. 2019; 6: 1863
  • 73 He F.-S, Yao Y, Xie W, Wu J. Chem. Commun. 2020; 56: 9469
  • 74 Liu N.-W, Liang S, Manolikakes G. Adv. Synth. Catal. 2017; 1308
  • 75 Gong X, Wang M, Ye S, Wu J. Org. Lett. 2019; 21: 1156
  • 76 Zhang J, Zhou K, Qiu G, Wu J. Org. Chem. Front. 2019; 6: 36
  • 77 Gong X, Chen J, Lai L, Cheng J, Sun J, Wu J. Chem. Commun. 2018; 54: 11172
  • 78 Zhang J, Li X, Xie W, Ye S, Wu J. Org. Lett. 2019; 21: 4950
  • 79 Liu Y, Wang Q.-L, Chen Z, Li H, Xiong B.-Q, Zhang P.-L, Tang K.-W. Chem. Commun. 2020; 56: 3011
  • 80 He F.-S, Ye S, Wu J. ACS Catal. 2019; 9: 8943
  • 81 Wang X, Kuang Y, Ye S, Wu J. Chem. Commun. 2019; 55: 14962
  • 82 Huang W, Cheng X. Synlett 2017; 28: 148
  • 83 Gong X, Yang M, Liu J.-B, He F.-S, Fan X, Wu J. Green Chem. 2020; 22: 1906
  • 84 Liu Y, Wang Q.-L, Chen Z, Chen P, Tang K.-W, Zhou Q, Xie J. Org. Biomol. Chem. 2019; 17: 10020

Zoom Image
Zoom Image
Zoom Image
Zoom Image
Zoom Image
Figure 1 Representative active sulfone-containing molecules
Zoom Image
Scheme 1 Synthesis of phenyl N-aryl sulfonamides using nitrobenzene and boronic acids
Zoom Image
Scheme 2 Proposed mechanism for the formation of phenyl N-aryl sulfonamide derivatives
Zoom Image
Scheme 3 Synthesis of sulfonamides using aryl halides
Zoom Image
Scheme 4 Synthesis of phenyl N-aryl sulfonamide derivatives using nitrobenzene­
Zoom Image
Scheme 5 Synthesis of cyclic sulfonamides
Zoom Image
Scheme 6 Synthesis of sulfonyl derivatives using alkyl bromides as the coupling partner
Zoom Image
Scheme 7 Proposed mechanism for the formation of aryl alkyl sulfones
Zoom Image
Figure 2 Sulfone-containing drug Xiidra®
Zoom Image
Scheme 8 Synthesis of β-methylsulfonylated N-heterocycles
Zoom Image
Scheme 9 Proposed mechanism for the formation of aryl alkyl sulfones
Zoom Image
Scheme 10 Synthesis of sulfonyl derivatives using dimethyl carbonate as the methylating agent
Zoom Image
Scheme 11 Synthesis of diaryl sulfones using boronic acid and di­aryliodonium salts
Zoom Image
Scheme 12 Proposed mechanism for the formation of diaryl sulfones
Zoom Image
Scheme 13 Synthesis of diaryl annulated sulfones
Zoom Image
Figure 3 Rofecoxib® an anti-inflammatory drug
Zoom Image
Scheme 14 Synthesis of 4-sulfonylated furan-2(5H)-ones
Zoom Image
Scheme 15 Proposed mechanism for the formation of 4-sulfonylated furan-2(5H)-ones
Zoom Image
Scheme 16 Synthesis of 3-cyanoalkyl sulfonylated oxindoles
Zoom Image
Scheme 17 Proposed mechanism for the formation of 3-cyanoalkylsulfonylated oxindoles
Zoom Image
Scheme 18 Cyanoalkylsulfonylation of 2,3-allenoic acids
Zoom Image
Scheme 19 Proposed mechanism for the cyanoalkylsulfonylation of 2,3-allenoic acids
Zoom Image
Scheme 20 Synthesis of nitrile-containing sulfones
Zoom Image
Scheme 21 Proposed mechanism for the formation of nitrile-containing sulfones
Zoom Image
Scheme 22 Synthesis of vinyl sulfones
Zoom Image
Scheme 23 A tentative mechanism for the formation of vinyl sulfones
Zoom Image
Scheme 24 Synthesis of aryl sulfones using aromatic aldehydes and aryl diazonium salts
Zoom Image
Scheme 25 A plausible mechanism for the formation of aryl sulfones
Zoom Image
Scheme 26 Synthesis of 3-sulfolenes using 1,3-dienes
Zoom Image
Scheme 27 Synthesis of aryl sulfonyl fluorides
Zoom Image
Scheme 28 Proposed mechanism for the formation of aryl sulfonyl fluorides
Zoom Image
Scheme 29 Synthesis of β-ketosulfones
Zoom Image
Scheme 30 Vicinal difunctionalization of alkenes via SO2 insertion
Zoom Image
Scheme 31 Metal-free synthesis of sulfonamides
Zoom Image
Scheme 32 Proposed mechanism for the formation of sulfonamides
Zoom Image
Scheme 33 Metal-free synthesis of 2-sulfonyl quinolones/isoquinolines
Zoom Image
Scheme 34 Proposed mechanism for the formation of 2-sulfonyl quinolones
Zoom Image
Scheme 35 Synthesis of sulfones and sulfides in deep eutectic solvents
Zoom Image
Scheme 36 Synthesis of primary sulfonamides
Zoom Image
Scheme 37 Proposed mechanism for the formation of primary sulfonamides
Zoom Image
Scheme 38 Synthesis of primary sulfonylhydrazides
Zoom Image
Scheme 39 Proposed mechanism for the formation of sufonylhydrazides
Zoom Image
Scheme 40 Synthesis of sulfonamides using nitrobenzenes, boronic acids, and Na2S2O5
Zoom Image
Scheme 41 Proposed mechanism for the formation of N-aryl sulfonamides
Zoom Image
Scheme 42 Synthesis of thiosulfonates
Zoom Image
Scheme 43 Proposed mechanism for the formation of thiosulfonates
Zoom Image
Scheme 44 Visible-light-mediated synthesis of alkylalkynyl sulfones
Zoom Image
Scheme 45 Proposed mechanism for the formation of alkylalkynyl sulfones
Zoom Image
Scheme 46 Visible-light-mediated synthesis of thiosulfonates
Zoom Image
Scheme 47 Proposed mechanism for the formation of thiosulfonates
Zoom Image
Scheme 48 Visible-light-mediated synthesis of S-aryl thiosulfonates
Zoom Image
Scheme 49 Proposed mechanism for the synthesis of S-aryl thiosulfonates
Zoom Image
Scheme 50 Visible-light-mediated synthesis of α,α-difluoro-β-keto­sulfones
Zoom Image
Scheme 51 Proposed mechanism for the formation of α,α-difluoro-β-ketosulfones
Zoom Image
Scheme 52 Synthesis of sulfonamide using PDI as photoredox catalyst
Zoom Image
Scheme 53 Proposed mechanism for the formation of sulfonamides
Zoom Image
Scheme 54 Synthesis of 3-(methylsulfonyl)benzo[b]thiophenes
Zoom Image
Scheme 55 Proposed mechanism for the formation of 3-(methylsulfonyl)benzo[b]thiophenes
Zoom Image
Scheme 56 Visible-light-mediated synthesis of aryl/alkyl sulfonamides
Zoom Image
Scheme 57 Visible-light-mediated benzylic C(sp3)–H sulfonylation of 2,4,6-trialkylphenols
Zoom Image
Scheme 58 Proposed mechanism for benzylic C(sp3)–H sulfonylation of 2,4,6-trialkylphenols
Zoom Image
Scheme 59 Visible-light-mediated sulfonylation of o-acyl oximes
Zoom Image
Scheme 60 Proposed mechanism for sulfonylation of O-acyl oximes
Zoom Image
Scheme 61 Visible-light-mediated synthesis of 2-cyanoalkylsulfonyl­ated 3,4-dihydronaphthalenes
Zoom Image
Scheme 62 Mechanism for synthesis of 2-cyanoalkylsulfonylated 3,4-dihydronaphthalenes
Zoom Image
Scheme 63 Visible-light-mediated synthesis of β-keto sulfones
Zoom Image
Scheme 64 Mechanism for synthesis of β-keto sulfones
Zoom Image
Scheme 65 Visible-light-mediated synthesis of alkyl alkynyl sulfones
Zoom Image
Scheme 66 Mechanism for the synthesis of alkyl alkenyl sulfones
Zoom Image
Scheme 67 Mechanism for synthesis of 2-sulfonyl-substituted 9H-pyrrolo[1,2-a]indoles