Download PDF
CC BY-NC-ND 4.0 · Eur J Dent 2017; 11(01): 006-011
DOI: 10.4103/ejd.ejd_276_16
Original Article
Dental Investigation Society

Effect of cleaning agent, primer application and their combination on the bond strength of a resin cement to two yttrium-tetragonal zirconia polycrystal zirconia ceramics

William Matthew Negreiros
1   Department of Restorative Dentistry, Piracicaba Dental School, State University of Campinas, Piracicaba, SP, Brazil
,
Glaucia Maria Bovi Ambrosano
2   Department of Social Dentistry, Piracicaba Dental School, State University of Campinas, Piracicaba, SP, Brazil
,
Marcelo Giannini
1   Department of Restorative Dentistry, Piracicaba Dental School, State University of Campinas, Piracicaba, SP, Brazil
› Author Affiliations
Further Information

Publication History

Publication Date:
25 September 2019 (online)

Also available at
   Permissions and Reprints

ABSTRACT

Objective: The objective of this study is to evaluate the effect of a cleaning agent and priming on the bond strength (BS) of a resin cement (RC) to zirconia ceramics after 24 h and 1 year of water-storage. Materials and Methods: Fifty-six Katana and 56 ZirCAD zirconia ceramic plates were prepared and each zirconia brand was divided into four groups (n = 14): (1) untreated; (2) treated with Ivoclean cleaning agent; (3) treated with Monobond Plus coupling agent; (4) treated with Ivoclean + Monobond Plus. Cleaning and coupling agents were applied to zirconia following the manufacturers' instructions. The RC was manipulated, inserted into tubes (0.75 mm diameter/1 mm height) that were positioned on the zirconia surfaces and light activated. Specimens were tested after 24 h and 1 year of water storage. A shear load was applied to the base of the RC cylinders (until failure. Data were analyzed by three-way ANOVA and Tukey tests (α = 5%). Results: No significant difference in BS was noted between zirconia ceramics, except when the combination of cleaning and coupling agents was used. This combination increased the BS for Katana zirconia. One year of water storage leads to a decrease in BS for all experimental groups. Conclusion: The combination of cleaning agent and priming can yield higher BS for Katana at 24 h. BS to zirconia ceramics reduced approximately 50% after 1 year.

Key words:

Bond strength - coupling agents - resin cement - zirconia
 

  • REFERENCES

  • 1 Andreiuolo RF, Sabrosa CE, Dias KR. Dual-scan technique for the customization of zirconia computer-aided design/computer-aided manufacturing frameworks. Eur J Dent 2013; 7 (Suppl. 01) 115-8
    Article in Thieme ConnectPubMedGoogle Scholar
  • 2 Sailer I, Makarov NA, Thoma DS, Zwahlen M, Pjetursson BE. All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates Part I: Single crowns (SCs). Dent Mater 2015; 31: 603-23
    CrossrefPubMedGoogle Scholar
  • 3 Kelly JR, Denry I. Stabilized zirconia as a structural ceramic: An overview. Dent Mater 2008; 24: 289-98
    CrossrefPubMedGoogle Scholar
  • 4 Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater 2008; 24: 299-307
    CrossrefPubMedGoogle Scholar
  • 5 Luthardt RG, Holzhüter M, Sandkuhl O, Herold V, Schnapp JD, Kuhlisch E. et al. Reliability and properties of ground Y-TZP-zirconia ceramics. J Dent Res 2002; 81: 487-91
    Google Scholar
  • 6 Thompson JY, Stoner BR, Piascik JR, Smith R. Adhesion/cementation to zirconia and other non-silicate ceramics: Where are we now?. Dent Mater 2011; 27: 71-82
    CrossrefPubMedGoogle Scholar
  • 7 Kern M, Wegner SM. Bonding to zirconia ceramic: Adhesion methods and their durability. Dent Mater 1998; 14: 64-71
    CrossrefPubMedGoogle Scholar
  • 8 Inokoshi M, De Munck J, Minakuchi S, Van Meerbeek B. Meta-analysis of bonding effectiveness to zirconia ceramics. J Dent Res 2014; 93: 329-34
    Google Scholar
  • 9 Anand S, Ebenezar AV, Anand N, Rajkumar K, Mahalaxmi S, Srinivasan N. Microshear bond strength evaluation of surface pretreated zirconia ceramics bonded to dentin. Eur J Dent 2015; 9: 224-7
    Article in Thieme ConnectPubMedGoogle Scholar
  • 10 Kern M. Bonding to oxide ceramics-laboratory testing versus clinical outcome. Dent Mater 2015; 31: 8-14
    CrossrefPubMedGoogle Scholar
  • 11 Kern M, Barloi A, Yang B. Surface conditioning influences zirconia ceramic bonding. J Dent Res 2009; 88: 817-22
    Google Scholar
  • 12 Yang B, Barloi A, Kern M. Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater 2010; 26: 44-50
    CrossrefPubMedGoogle Scholar
  • 13 Kim DH, Son JS, Jeong SH, Kim YK, Kim KH, Kwon TY. Efficacy of various cleaning solutions on saliva-contaminated zirconia for improved resin bonding. J Adv Prosthodont 2015; 7: 85-92
    CrossrefPubMedGoogle Scholar
  • 14 Feitosa SA, Patel D, Borges AL, Alshehri EZ, Bottino MA, Özcan M. et al. Effect of cleansing methods on saliva-contaminated zirconia – An evaluation of resin bond durability. Oper Dent 2015; 40: 163-71
    CrossrefPubMedGoogle Scholar
  • 15 Marshall SJ, Bayne SC, Baier R, Tomsia AP, Marshall GW. A review of adhesion science. Dent Mater 2010; 26: 11-6
    Google Scholar
  • 16 Völkel T. Scientific Documentation Ivoclean. 2011; 3-10
    PubMedGoogle Scholar
  • 17 Ishii R, Tsujimoto A, Takamizawa T, Tsubota K, Suzuki T, Shimamura Y. et al. Influence of surface treatment of contaminated zirconia on surface free energy and resin cement bonding. Dent Mater J 2015; 34: 91-7
    CrossrefPubMedGoogle Scholar
  • 18 Xie H, Tay FR, Zhang F, Lu Y, Shen S, Chen C. Coupling of 10-methacryloyloxydecyldihydrogenphosphate to tetragonal zirconia: Effect of pH reaction conditions on coordinate bonding. Dent Mater 2015; 31: 218-25
    CrossrefPubMedGoogle Scholar