Microhardness of composite resin cured through different primary tooth thicknesses with different light intensities and curing times: In vitro study

Fatemeh Mazhari; Behjatolmolok Ajami; Saied Mostafa Moazzami; Bahareh Baghaee; Bahareh Hafez

doi:10.4103/1305-7456.178316

European Journal of Dentistry, Inhaltsverzeichnis

CC BY-NC-ND 4.0 · Eur J Dent 2016; 10(02): 203-209
DOI: 10.4103/1305-7456.178316

Original Article

Dental Investigation Society

Microhardness of composite resin cured through different primary tooth thicknesses with different light intensities and curing times: In vitro study

Fatemeh Mazhari

¹Dental Material Research Center, Department of Pediatric Dentistry, School of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran

,

Behjatolmolok Ajami

²Oral and Maxillofacial Diseases Research Center, Department of Pediatric Dentistry, School of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran

,

Saied Mostafa Moazzami

³Department of Operative and Esthetic Dentistry, Dental Research Center, School of Dentistry, Mashhad University of Medical Sciences, Mashhad, Iran

,

Bahareh Baghaee

⁴Pediatric Dentist, Private Practice, Mashhad, Iran

,

Bahareh Hafez

⁵Dentist, NIOC Health Organization, Mashhad, Iran

› Institutsangaben

Abstract

als PDF herunterladen

ABSTRACT

Objective: The aim of this study was to evaluate the effect of increased exposure time and light intensity on microhardness of cured composite through different thicknesses of tooth structure in primary teeth. Materials and Methods: One hundred and seventy cylindrical resin composite specimens were prepared. All specimens were divided into 17 experimental and control groups. “Light-emitting diode” light curing unit (LCU) applied directly or through 1, 2, and 3 mm thicknesses tooth slices for experimental groups. The irradiation protocols were 25 and 50 s at 650 mW/cm² and 15 and 30 s at 1100 mW/cm². The “quartz-tungsten-halogen” LCU (400 mW/cm²) for 40 s was used in control group. Microhardness was measured by the Vickers hardness test. Results: Indirectly cured specimens and those cured through a 1 mm thick tooth structure, an increase in intensity caused hardness drop. In the specimens cured through 2 and 3 mm thick tooth structures, increased intensity and/or exposure time did not show any appropriate changes on microhardness. Conclusion: Irradiation through a 1.0 mm thick tooth slice resulted in reduced microhardness although it was still within the clinically acceptable level. The hardness values of the specimens cured through 2 or 3 mm thick tooth slices fell below the clinically acceptable level even after doubling the exposure time and/or light intensity.

Key words:

Composite resin - curing time - light intensity - microhardness - primary tooth

PDF (1126 kb)

Referenzen

REFERENCES
1 Aguiar FH, Braceiro A, Lima DA, Ambrosano GM, Lovadino JR. Effect of light curing modes and light curing time on the microhardness of a hybrid composite resin. J Contemp Dent Pract 2007; 8: 1-8
2 Campregher UB, Samuel SM, Fortes CB, Medina AD, Collares FM, Ogliari FA. Effectiveness of second-generation light-emitting diode (LED) light curing units. J Contemp Dent Pract 2007; 8: 35-42
3 Fan PL, Schumacher RM, Azzolin K, Geary R, Eichmiller FC. Curing-light intensity and depth of cure of resin-based composites tested according to international standards. J Am Dent Assoc 2002; 133: 429-34
4 Yazici AR, Kugel G, Gül G. The knoop hardness of a composite resin polymerized with different curing lights and different modes. J Contemp Dent Pract 2007; 8: 52-9
5 Weaver WS, Blank LW, Pelleu Jr GB. A visible-light-activated resin cured through tooth structure. Gen Dent 1988; 36: 236-7
6 Dall'Magro E, Sinhoreti MA, Correr AB, Correr-Sobrinho L, Consani S, Puppin-Rontani RM. Effect of different initial light intensity by the soft-start photoactivation on the bond strength and knoop hardness of a dental composite. Braz Dent J 2007; 18: 107-12
7 Alpöz AR, Ertugrul F, Cogulu D, Ak AT, Tanoglu M, Kaya E. Effects of light curing method and exposure time on mechanical properties of resin based dental materials. Eur J Dent 2008; 2: 37-42
8 Perdigão J, Reis A, Loguercio AD. Dentin adhesion and MMPs: A comprehensive review. J Esthet Restor Dent 2013; 25: 219-41
9 Hashimoto M. A review – Micromorphological evidence of degradation in resin-dentin bonds and potential preventional solutions. J Biomed Mater Res B Appl Biomater 2010; 92: 268-80
10 Chan KC, Boyer DB. Curing light-activated composite resins through dentin. J Prosthet Dent 1985; 54: 643-5
11 Arikawa H, Kanie T, Fujii K, Shinohara N, Takahashi H, Inoue K. A method for evaluating color stability of light-cured composite resins using an experimental filter. Dent Mater J 2000; 19: 338-45
12 Arikawa H, Kanie T, Fujii K, Fukui K, Homma T. Mechanical properties of light-cured composite resins cured through filters that simulate enamel. Dent Mater J 2002; 21: 147-55
13 Arikawa H, Kanie T, Fujii K, Ban S, Takahashi H. Light-attenuating effect of dentin on the polymerization of light-activated restorative resins. Dent Mater J 2004; 23: 467-73
14 Pires JA, Cvitko E, Denehy GE, Swift Jr EJ. Effects of curing tip distance on light intensity and composite resin microhardness. Quintessence Int 1993; 24: 517-21
15 Lindberg A, Peutzfeldt A, van Dijken JW. Effect of power density of curing unit, exposure duration, and light guide distance on composite depth of cure. Clin Oral Investig 2005; 9: 71-6
16 de Araújo CS, Schein MT, Zanchi CH, Rodrigues Jr. SA, Demarco FF. Composite resin microhardness: The influence of light curing method, composite shade, and depth of cure. J Contemp Dent Pract 2008; 9: 43-50
17 Ceballos L, Fuentes MV, Tafalla H, Martínez A, Flores J, Rodríguez J. Curing effectiveness of resin composites at different exposure times using LED and halogen units. Med Oral Patol Oral Cir Bucal 2009; 14: E51-6
18 Nör JE, Feigal RJ, Dennison JB, Edwards CA. Dentin bonding: SEM comparison of the dentin surface in primary and permanent teeth. Pediatr Dent 1997; 19: 246-52
19 Koutsi V, Noonan RG, Horner JA, Simpson MD, Matthews WG, Pashley DH. The effect of dentin depth on the permeability and ultrastructure of primary molars. Pediatr Dent 1994; 16: 29-35
20 da Silva EM, Poskus LT, Guimarães JG. Influence of light-polymerization modes on the degree of conversion and mechanical properties of resin composites: A comparative analysis between a hybrid and a nanofilled composite. Oper Dent 2008; 33: 287-93
21 Yap AU, Ng SC, Siow KS. Soft-start polymerization: Influence on effectiveness of cure and post-gel shrinkage. Oper Dent 2001; 26: 260-6
22 Yap AU, Seneviratne C. Influence of light energy density on effectiveness of composite cure. Oper Dent 2001; 26: 460-6
23 Odor TM, Watson TF, Pitt FordTR, McDonald F. Pattern of transmission of laser light in teeth. Int Endod J 1996; 29: 228-34
24 Arikawa H, Kanie T, Fujii K, Shinohara N. Bending strength and depth of cure of light-cured composite resins irradiated using filters that simulate enamel. J Oral Rehabil 2004; 31: 74-80
25 Jain P, Pershing A. Depth of cure and microleakage with high-intensity and ramped resin-based composite curing lights. J Am Dent Assoc 2003; 134: 1215-23
26 Peutzfeldt A, Asmussen E. Resin composite properties and energy density of light cure. J Dent Res 2005; 84: 659-62
27 Rode KM, de Freitas PM, Lloret PR, Powell LG, Turbino ML. Micro-hardness evaluation of a micro-hybrid composite resin light cured with halogen light, light-emitting diode and argon ion laser. Lasers Med Sci 2009; 24: 87-92
28 David JR, Gomes OM, Gomes JC, Loguercio AD, Reis A. Effect of exposure time on curing efficiency of polymerizing units equipped with light-emitting diodes. J Oral Sci 2007; 49: 19-24
29 El-Mowafy O, El-Badrawy W, Wasef M, Omar H, Kermanshahi S. Efficacy of new LED light-curing units in hardening of class II composite restorations. J Can Dent Assoc 2007; 73: 253
30 Johnston WM, Leung RL, Fan PL. A mathematical model for post-irradiation hardening of photoactivated composite resins. Dent Mater 1985; 1: 191-4
31 DeWald JP, Ferracane JL. A comparison of four modes of evaluating depth of cure of light-activated composites. J Dent Res 1987; 66: 727-30
32 Caldas DB, de Almeida JB, Correr-Sobrinho L, Sinhoreti MA, Consani S. Influence of curing tip distance on resin composite knoop hardness number, using three different light curing units. Oper Dent 2003; 28: 315-20