Subscribe to RSS
![](/products/assets/desktop/img/oa-logo.png)
DOI: 10.4103/1305-7456.178295
Dimensional stability of two solder index materials
Publication History
Publication Date:
23 September 2019 (online)
![](https://www.thieme-connect.de/media/10.1055-s-00042133/201602/lookinside/thumbnails/10-4103-1305-7456-178295_00259-1.jpg)
ABSTRACT
Objectives: This study aimed to compare the dimensional accuracy of two indexing materials, an acrylic resin (GC pattern resin) and a castable composite (Bredent). The effect of time lapse until investment was also investigated. Materials and Methods: Two standardized brass dies 15 mm apart were prepared and then 20 identical coping-bar assemblies were designed and fabricated by a rapid prototyping device. Each bar was sectioned at the center, and indices were fabricated from an acrylic resin or castable composite (n = 10 per group). The distances between the reference points were measured with a digital microscope at ×80 magnifications at 15 min, 60 min, and 24 h after indexing. Data were statically analyzed using repeated-measure ANOVA (α = 0.05). Results: The distance between the reference points without the coping being joined was considered as the baseline measurement (control group). The mean distance was 19.30 ± 0.04 mm between the reference points where the copings were not joined. When indexed with acrylic resin, the mean ± standard deviation (SD) dimensions were 19.27 ± 0.087 mm (15 min), 19.25 ± 0.09 mm (60 min), and 18.98 ± 0.1 mm (24 h). The mean ± SD dimensions for composite were 19.29 ± 0.087 mm (15 min), 19.28 ± 0.08 mm (60 min), and 19.26 ± 0.08 mm (24 h). All tested groups showed significant differences compared to the control group except when it was indexed with composite and where the distances were measured after 15 and 60 min (P > 0.05). Conclusions: The most accurate indexed-assemblies belonged to castable composite at 15 and 60 min.
-
REFERENCES
- 1 Patil A, Singh K, Sahoo S, Suvarna S, Kumar P, Singh A. Comparative assessment of marginal accuracy of grade II titanium and Ni-Cr alloy before and after ceramic firing: An in vitro study. Eur J Dent 2013; 7: 272-7
- 2 Demir N, Ozturk AN, Malkoc MA. Evaluation of the marginal fit of full ceramic crowns by the microcomputed tomography (micro-CT) technique. Eur J Dent 2014; 8: 437-44
- 3 McDonnell T, Houston F, Byrne D, Gorman C, Claffey N. The effect of time lapse on the accuracy of two acrylic resins used to assemble an implant framework for soldering. J Prosthet Dent 2004; 91: 538-40
- 4 Jemt T, Rubenstein JE, Carlsson L, Lang BR. Measuring fit at the implant prosthodontic interface. J Prosthet Dent 1996; 75: 314-25
- 5 Tan KB, Rubenstein JE, Nicholls JI, Yuodelis RA. Three-dimensional analysis of the casting accuracy of one-piece, osseointegrated implant-retained prostheses. Int J Prosthodont 1993; 6: 346-63
- 6 Riedy SJ, Lang BR, Lang BE. Fit of implant frameworks fabricated by different techniques. J Prosthet Dent 1997; 78: 596-604
- 7 Jemt T, Bäck T, Petersson A. Photogrammetry – An alternative to conventional impressions in implant dentistry?. A clinical pilot study. Int J Prosthodont 1999; 12: 363-8
- 8 Wee AG, Aquilino SA, Schneider RL. Strategies to achieve fit in implant prosthodontics: A review of the literature. Int J Prosthodont 1999; 12: 167-78
- 9 Rubenstein JE, Lowry MB. A comparison of two solder registration materials: A three-dimensional analysis. J Prosthet Dent 2006; 95: 379-91
- 10 Hollenback GM, Smith DD, Shell JS. The accuracy of dental appliances assembled by soldering. II. J Calif Dent Assoc 1966; 42: 124-8
- 11 Stackhouse Jr JA. Assembly of dental units by soldering. J Prosthet Dent 1967; 18: 131-9
- 12 Fusayama T, Wakumoto S, Hosoda H. Accuracy of fixed partial dentures made by various soldering techniques and one-piece casting. J Prosthet Dent 1964; 14: 334-42
- 13 Ryge G. Dental soldering procedures. Dent Clin North Am 1958; 2: 747-57
- 14 Steinman R. Warpage produced by soldering with dental solders and gold alloys. J Prosthet Dent 1954; 4: 384-95
- 15 Patterson Jr JC. A technique for accurate soldering. J Prosthet Dent 1972; 28: 552-6
- 16 Jelenko JF & Co. Crown and Bridge Construction: A Handbook of Dental Laboratory Procedures. 5th ed.. New York: Jelenko JF and Co.; 1963
- 17 Harper RJ, Nicholls JI. Distortions in indexing methods and investing media for soldering and remount procedures. J Prosthet Dent 1979; 42: 172-9
- 18 Moon PC, Eshleman JR, Douglas HB, Garrett SG. Comparison of accuracy of soldering indices for fixed prostheses. J Prosthet Dent 1978; 40: 35-8
- 19 Cho GC, Chee WW. Efficient soldering index materials for fixed partial dentures and implant substructures. J Prosthet Dent 1995; 73: 424-7
- 20 Mojon P, Oberholzer JP, Meyer JM, Belser UC. Polymerization shrinkage of index and pattern acrylic resins. J Prosthet Dent 1990; 64: 684-8
- 21 Dixon DL, Breeding LC, Lindquist TJ. Linear dimensional variability and tensile strengths of three solder index materials. J Prosthet Dent 1992; 67: 726-9
- 22 Ness EM, Nicholls JI, Rubenstein JE, Smith DE. Accuracy of the acrylic resin pattern for the implant-retained prosthesis. Int J Prosthodont 1992; 5: 542-9