RSS-Feed abonnieren
DOI: 10.1055/s-2005-864090
© Georg Thieme Verlag Stuttgart · New York
Die Präzisionsabformung: materialimmanente und verfahrenstechnische Einflussfaktoren - Teil 1: Dimensionstreue
The Precision Impression: Material and Technique Related Factors of Influence - Part 1: AccuracyPublikationsverlauf
Publikationsdatum:
24. Februar 2005 (online)
Zusammenfassung
Die Rekonstruktion beschädigter Zähne kann dank moderner Adhäsiv- und Komposittechnologien häufig mit direkten Füllungswerkstoffen erfolgen. Ist der Schaden am Zahn jedoch von größerem Ausmaß oder sind einzelne bzw. mehrere Zähne verloren gegangen, werden zur Wiederherstellung der Kaufunktion und Phonetik indirekte Restaurationen (Kronen, Brücken, Teilprothesen usw.) notwendig. Ferner muss die Rekonstruktion ästhetischen Ansprüchen genügen.
Summary
The accuracy of an impression is crucial for the fit of a crown and consequently for the long term stability of the prosthodontic treatment. Many material and technique related factors have an influence on the accuracy (dimension, detail reproduction) of the impression. With regard to the impression technique it is of major importance, that the dentist selects the correct combination of the impression material (e. g. viscosities, setting time, type) and impression tray (e. g. stock trays, individual trays) according to the clinical situation.
Nowadays, most impressions are taken with C-Silicones and Polyvinylsiloxanes (PVS), respectively. To obtain optimal results, the impression material itself has to fulfil certain demands. This demands and the impact of the impression technique, impression tray and viscosities on the dimensions of the cast are described using an in-vitro study-setup. Recommendations for the correct combinations are given. Finally, a case report shows the clinical relevance of the in-vitro measurements.
Schlüsselwörter
Abformung - Dimensionstreue - Korrekturtechnik - Präzision - In-vitro-Studie
Key Words
Impression - Accuracy - Double-Stage Putty-Wash Technique - Precision - In-vitro-Study
Literatur
- 1 DGZMK .Stellungnahme der DGZMK „Kronen und Brücken”. www.dgzmk.de/stellung/kronenundbruecken.pdf
- 2 Hung SH. et al. . Accuracy of one-step versus two-step putty wash addition silicone impression technique. J Prosthet Dent. 1992; 67 583-589
- 3 Noack T, Balkenhol M, Wöstmann B. Möglichkeiten und Grenzen der Doppelmischabformung bei prothetischer Versorgung. ZWR. 2004; 10 451-454
- 4 Wöstmann B. Die Abformung präparierter Zahnhartsubstanz. Zahnarztl Mitt. 1999; 89 1216-1225
- 5 Wöstmann B. Zum derzeitigen Stand der Abformung in der Zahnheilkunde. Medizinische Habilitationsschrift, Münster 1993
Korrespondenzadresse
Dr. M. Balkenhol
Poliklinik für Zahnärztliche Prothetik
Zentrum für Zahn-, Mund- und Kieferheilkunde des Universitätsklinikums Gießen
Schlangenzahl 14, 35392 Gießen
eMail: markus.balkenhol@dentist.med.uni-giessen.de