Subscribe to RSS
![](/products/assets/desktop/img/oa-logo.png)
DOI: 10.1055/s-0041-1735442
Impact of Immediate Dentin Sealing Using Universal Adhesive under Simulated Pulp Pressure on Microtensile Bond Strength of Indirect Resin Composite Restorations and Dentin Permeability
![](https://www.thieme-connect.de/media/10.1055-s-00042133/202203/lookinside/thumbnails/10-1055-s-0041-1735442_2161613-1.jpg)
Abstract
Objective The aim of this study was to investigate the effect of immediate dentin sealing (IDS) technique using universal adhesive under simulated pulp pressure on microtensile bond strength (μTBS) of indirect resin composite restorations and dentin permeability.
Materials and Methods Fifty extracted caries-free human third molars were used for specimens' preparation. Each molar's occlusal table was abraded flat and their roots were separated under continuous water cooling. Forty specimens were used for microtensile bond strength test (μTBST) evaluation. The μTBST specimens were randomly assigned to two groups according to the dentin sealing time; Immediate dentin sealing (IDS) and delayed dentin sealing (DDS). Each group was further subdivided into two subgroups according to the adhesive system used for dentin sealing: iBOND self-etch adhesive and GLUMA Bond Universal. All specimens were exposed to simulated pulp pressure for 1 week then restored using computer-aided design/computer-aided manufacturing (CAD/CAM) resin composite blocks. The μTBS was evaluated for all tested subgroups after 24 hours and 6 months of water storage. The remaining 10 teeth were used for the preparation of dentin discs for dentin permeability evaluation. They were divided into two groups according to type of self-etch adhesive used. Fluid filtration rate was evaluated after etching, with smear layer and after adhesive application. Results obtained were statistically analyzed using Shapiro–Wilk test and Weibull analysis.
Results Statistically significant difference was recorded between µTBS mean values of both IDS and DDS techniques at 24 hours and after 6 months of water storage. GLUMA Bond Universal adhesive had significantly higher bond strength compared with iBond at both IDS and DDS techniques, but both adhesives showed a significant reduction in the Weibull characteristic strength after 6 months of water storage. Significant reduction in dentin permeability was recorded by both adhesives without any significant difference between them.
Conclusions The IDS technique using universal adhesive in self-etch mode is an effective strategy for improving the final bond strength of CAD/CAM resin composite restorations and reducing dentin permeability.
Keywords
CAD/CAM resin composite restorations - delayed dentin sealing - dentin permeability - immediate dentin sealing - microtensile bond strength - universal adhesivePublication History
Article published online:
16 November 2021
© 2021. The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution License, permitting unrestricted use, distribution, and reproduction so long as the original work is properly cited. (https://creativecommons.org/licenses/by/4.0/).
Thieme Medical and Scientific Publishers Pvt. Ltd.
A-12, 2nd Floor, Sector 2, Noida-201301 UP, India
-
References
- 1 Ruse ND, Sadoun MJ. Resin-composite blocks for dental CAD/CAM applications. J Dent Res 2014; 93 (12) 1232-1234
- 2 Ishii N, Maseki T, Nara Y. Bonding state of metal-free CAD/CAM onlay restoration after cyclic loading with and without immediate dentin sealing. Dent Mater J 2017; 36 (03) 357-367
- 3 Tay FR, Pashley DH. Water treeing–a potential mechanism for degradation of dentin adhesives. Am J Dent 2003; 16 (01) 6-12
- 4 Sailer I, Tettamanti S, Stawarczyk B, Fischer J, Hämmerle CH. In vitro study of the influence of dentin desensitizing and sealing on the shear bond strength of two universal resin cements. J Adhes Dent 2010; 12 (05) 381-392
- 5 Albuquerque M, Pegoraro M, Mattei G, Reis A, Loguercio AD. Effect of double-application or the application of a hydrophobic layer for improved efficacy of one-step self-etch systems in enamel and dentin. Oper Dent 2008; 33 (05) 564-570
- 6 King NM, Tay FR, Pashley DH. et al. Conversion of one-step to two-step self-etch adhesives for improved efficacy and extended application. Am J Dent 2005; 18 (02) 126-134
- 7 Santana VB, de RS Alexandre, Rodrigues JA, Ely C, Reis AF. Effects of immediate dentin sealing and pulpal pressure on resin cement bond strength and nanoleakage. Oper Dent 2016; 41 (02) 189-199
- 8 Magne P, Kim TH, Cascione D, Donovan TE. Immediate dentin sealing improves bond strength of indirect restorations. J Prosthet Dent 2005; 94 (06) 511-519
- 9 Magne P, So WS, Cascione D. Immediate dentin sealing supports delayed restoration placement. J Prosthet Dent 2007; 98 (03) 166-174
- 10 Magne P. Immediate dentin sealing: a fundamental procedure for indirect bonded restorations. J Esthet Restor Dent 2005; 17 (03) 144-154 , discussion 155
- 11 Haller B. Which self-etch bonding systems are suitable for which clinical indications?. Quintessence Int 2013; 44 (09) 645-661
- 12 Chen C, Niu LN, Xie H. et al. Bonding of universal adhesives to dentine–old wine in new bottles?. J Dent 2015; 43 (05) 525-536
- 13 Rosa WL, Piva E, Silva AF. Bond strength of universal adhesives: a systematic review and meta-analysis. J Dent 2015; 43 (07) 765-776
- 14 Muñoz MA, Luque-Martinez I, Malaquias P. et al. In vitro longevity of bonding properties of universal adhesives to dentin. Oper Dent 2015; 40 (03) 282-292
- 15 Odor TM, Pitt Ford TR, McDonald F. Adrenaline in local anaesthesia: the effect of concentration on dental pulpal circulation and anaesthesia. Endod Dent Traumatol 1994; 10 (04) 167-173
- 16 Farghal NS, Abdalla AI, El-Shabrawy SM, Showaib EA. The effect of combined application of new dentin desensitizing agent and deproteinization on dentin permeability of different adhesive systems. Tanta Dent J 2013; 10 (03) 138-144
- 17 Yiu CKY, Hiraishi N, Chersoni S. et al. Single-bottle adhesives behave as permeable membranes after polymerisation. II. Differential permeability reduction with an oxalate desensitiser. J Dent 2006; 34 (02) 106-116
- 18 Pashley DH, Galloway SE. The effects of oxalate treatment on the smear layer of ground surfaces of human dentine. Arch Oral Biol 1985; 30 (10) 731-737
- 19 Chersoni S, Suppa P, Grandini S. et al. In vivo and in vitro permeability of one-step self-etch adhesives. J Dent Res 2004; 83 (06) 459-464
- 20 Yiu CKY, Hiraishi N, Chersoni S. et al. Single-bottle adhesives behave as permeable membranes after polymerisation. II. Differential permeability reduction with an oxalate desensitiser. J Dent 2006; 34 (02) 106-116
- 21 Carvalho AO, Oliveira MT, Nikaido T, Tagami J, Giannini M. Effect of adhesive system and application strategy on reduction of dentin permeability. Braz Oral Res 2012; 26 (05) 397-403
- 22 Paul SJ, Schärer P. Effect of provisional cements on the bond strength of various adhesive bonding systems on dentine. J Oral Rehabil 1997; 24 (01) 8-14
- 23 Cagidiaco MC, Ferrari M, Garberoglio R, Davidson CL. Dentin contamination protection after mechanical preparation for veneering. Am J Dent 1996; 9 (02) 57-60
- 24 Dietschi D, Herzfeld D. In vitro evaluation of marginal and internal adaptation of class II resin composite restorations after thermal and occlusal stressing. Eur J Oral Sci 1998; 106 (06) 1033-1042
- 25 Magne P, Douglas WH. Porcelain veneers: dentin bonding optimization and biomimetic recovery of the crown. Int J Prosthodont 1999; 12 (02) 111-121
- 26 Reis A, Rocha de Oliveira Carrilho M, Schroeder M, Tancredo LL, Loguercio AD. The influence of storage time and cutting speed on microtensile bond strength. J Adhes Dent 2004; 6 (01) 7-11
- 27 Yoshihara K, Yoshida Y, Hayakawa S. et al. Nanolayering of phosphoric acid ester monomer on enamel and dentin. Acta Biomater 2011; 7 (08) 3187-3195
- 28 Yoshida Y, Yoshihara K, Nagaoka N. et al. Self-assembled nano-layering at the adhesive interface. J Dent Res 2012; 91 (04) 376-381
- 29 Van Landuyt KL, Yoshida Y, Hirata I. et al. Influence of the chemical structure of functional monomers on their adhesive performance. J Dent Res 2008; 87 (08) 757-761
- 30 Yoshida Y, Nagakane K, Fukuda R. et al. Comparative study on adhesive performance of functional monomers. J Dent Res 2004; 83 (06) 454-458
- 31 Van Landuyt KL, De Munck J, Snauwaert J. et al. Monomer-solvent phase separation in one-step self-etch adhesives. J Dent Res 2005; 84 (02) 183-188
- 32 Finger WJ, Shao B, Hoffmann M, Kanehira M, Endo T, Komatsu M. Does application of phase-separated self-etching adhesives affect bond strength?. J Adhes Dent 2007; 9 (02) 169-173
- 33 Van Meerbeek B, Yoshihara K, Yoshida Y, Mine A, De Munck J, Van Landuyt KL. State of the art of self-etch adhesives. Dent Mater 2011; 27 (01) 17-28
- 34 Orucoglu H, Belli S. Evaluation of the effect of four self-etching adhesives on dentin permeability. J Biomed Mater Res B Appl Biomater 2009; 90 (01) 110-115
- 35 Greenhill JD, Pashley DH. The effects of desensitizing agents on the hydraulic conductance of human dentin in vitro. J Dent Res 1981; 60 (03) 686-698
- 36 Elgalaid TO, Creanor SL, Creanor S, Hall AF. The repeatability of human dentine permeability measurement in vitro. J Dent 2008; 36 (01) 42-48
- 37 Sezinando A. Looking for the ideal adhesive-a review. Rev Port Estomatol Cir Maxilofac 2014; 4: 194-206
- 38 Yu X, Liang B, Jin X, Fu B, Hannig M. Comparative in vivo study on the desensitizing efficacy of dentin desensitizers and one-bottle self-etching adhesives. Oper Dent 2010; 35 (03) 279-286