Subscribe to RSS
DOI: 10.1055/s-0041-1726064
Use of 3D Printing in Planning the Reconstruction of Total Hip Arthroplasty: A Teaching Tool[*]
Article in several languages: português | English
Abstract
The present study aims to demonstrate how biomodels can be used as teaching tools for surgical techniques and training in a medical residency service.
A case series was carried out in our orthopedics and traumatology outpatient facility using three-dimensional (3D) printing for surgical planning to contribute to the surgical teaching and training of resident physicians. Two cases were selected as examples in the present article.
Biomodels enable a better understanding of the surgery by the surgical team and residents, reducing the surgical time and the risks for the patients.
These models can be a good teaching method to plan reconstructions of total hip arthroplasties, evaluate and predict surgical difficulties, and optimize procedures.
Keywords
arthroplasty, replacement, hip - hip/surgery - printing, three-dimensional - models, anatomic* Study developed at the Orthopedics and Traumatology Service of Santa Casa de Misericórdia de Porto Alegre and at Universidade Federal de Ciências da Saúde de Porto Alegre, Rio Grande do Sul, with the collaboration of the Bioengineering, Biomechanics and Biomaterials Laboratory of Universidade de Passo Fundo, Rio Grande do Sul, Brazil.
Publication History
Received: 23 August 2020
Accepted: 01 December 2020
Article published online:
13 August 2021
© 2021. Sociedade Brasileira de Ortopedia e Traumatologia. This is an open access article published by Thieme under the terms of the Creative Commons Attribution-NonDerivative-NonCommercial License, permitting copying and reproduction so long as the original work is given appropriate credit. Contents may not be used for commecial purposes, or adapted, remixed, transformed or built upon. (https://creativecommons.org/licenses/by-nc-nd/4.0/)
Thieme Revinter Publicações Ltda.
Rua do Matoso 170, Rio de Janeiro, RJ, CEP 20270-135, Brazil
-
Referências
- 1 Oliveira MF, Maia IA, Noritomi PY, Nargi CG. Construção de Scaffolds para engenharia tecidual utilizando prototipagem rápida. Materia (Rio J) 2007; 12 (02) 373-382
- 2 Bagaria V, Deshpande S, Rasalkar DD, Kuthe A, Paunipagar BK. Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures. Eur J Radiol 2011; 80 (03) 814-820
- 3 Yang S, Leong KF, Du Z, Chua CK. The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. Tissue Eng 2002; 8 (01) 1-11
- 4 Mothes FC, Britto A, Matsumoto F, Tonding M, Ruaro R. O uso da prototipagem tridimensional para o planejamento do tratamento das deformidades ósseas do úmero proximal. Rev Bras Ortop 2018; 53 (05) 595-601
- 5 Marques TMR. Definição de um modelo de planeamento pré operatório em ortopedia usando imagem digital [dissertação]. Porto, Portugal: Faculdade de Engenharia da Universidade do Porto, Portugal; 2013