Thiapillar[6]arene: Synthesis, Functionalization, and Properties

Abstract

The design and synthesis of new macrocycles with well-defined cavities represent a promising avenue for the development of new supramolecular hosts. Moreover, the ability to diversify a macrocycle through chemical manipulations enables the fine-tuning and tailoring of properties. In this report, the synthesis and functionalization of thiapillar[6]arene, a pillar[6]arene analogue in which the bridging methylene groups are replaced by sulfurs, are described. First, we demonstrate the scalable synthesis of the parent thiapillar[6]arene. Next, the diversification of thiapillar[6]arene is demonstrated via functionalization of the phenols and oxidation of the sulfur atoms. The solid-state structures of two thiapillar[6]arene derivatives are reported, and the effect of sulfur oxidation state on the macrocyclic conformation is discussed. All sulfone derivatives described were found to demonstrate high luminescence quantum yields (Φ_F = 0.43–0.66) in CH₂Cl₂ with emission maxima between λ = 404 and 462 nm. Lastly, assessment of the electrochemical properties of the sulfone derivatives by square-wave voltammetry revealed electron-accepting ability owing to the oxidation of the sulfur atoms, with four reduction events observed for the analogues surveyed. Overall, this work implicates thiapillar[6]arene as a modular scaffold amenable for further applications in host–guest chemistry and sensing.

Key words

pillararene - thiapillararene - macrocycle - fluorescence - sulfur

Publication History

Received: 14 April 2022

Accepted after revision: 23 May 2022

Article published online:
21 June 2022

• References and Notes

• 1 Calixarenes and Beyond, 1st ed. Nari P, Sessler JL, Wang M.-X. Springer; Berlin: 2016
• 2 Hardie MJ. Chem. Soc. Rev. 2010; 39: 516
• 3 Aoyama Y, Tanaka Y, Toi H, Ogoshi H. J. Am. Chem. Soc. 1988; 110: 634
• 4 Ogoshi T, Yamagishi T, Nakamoto Y. Chem. Rev. 2016; 116: 7937
• 5 Yu G, Yu W, Mao Z, Gao C, Huang F. Small 2015; 11: 919
• 6 Zhou Y, Li H, Yang Y.-W. Chin. Chem. Lett. 2015; 26: 825
• 7 Lu R.-Q, Luo S.-XL, He Q, Concellón A, Swager TM. Adv. Funct. Mater. 2021; 31: 2007281
• 8 Lu R.-Q, Yuan W, Croy RG, Essigmann JM, Swager TM. J. Am. Chem. Soc. 2021; 143: 19809
• 9 Danil de Namor AF, Cleverley RM, Zapata-Ormachea ML. Chem. Rev. 1998; 98: 2495
• 10 Shi T.-H, Guo Q.-H, Tong S, Wang M.-X. J. Am. Chem. Soc. 2020; 142: 4576
• 11 Shi T.-H, Tong S, Wang M.-X. Angew. Chem. Int. Ed. 2020; 59: 7700
• 12 Ogoshi T, Shiga R, Hashizume M, Yamagishi T.-A. Chem. Commun. 2011; 47: 6927
• 13 Chi X, Ji X, Xia D, Huang F. J. Am. Chem. Soc. 2015; 137: 1440
• 14 Ogoshi T, Demachi K, Kitajima K, Yamagishi T.-A. Chem. Commun. 2011; 47: 7164
• 15 Han C, Zhang Z, Yu G, Huang F. Chem. Commun. 2012; 48: 9876
• 16 Xue M, Yang Y, Chi X, Zhang Z, Huang F. Acc. Chem. Res. 2012; 45: 1294
• 17 Strutt NL, Fairen-Jimenez D, Iehl J, Lalonde MB, Snurr RQ, Farha OK, Hupp JT, Stoddart JF. J. Am. Chem. Soc. 2012; 134: 17436
• 18 Zhang Z, Luo Y, Chen J, Dong S, Yu Y, Ma Z, Huang F. Angew. Chem. Int. Ed. 2011; 50: 1397
• 19 Yang W, Samanta K, Wan X, Thikekar TU, Chao Y, Li S, Du K, Xu J, Gao Y, Zuilhof H, Sue AC.-H. Angew. Chem. Int. Ed. 2020; 59: 3994
• 20 Wu J, Mu AU, Li B, Wang C.-Y, Fang L, Yang Y.-W. Angew. Chem. Int. Ed. 2018; 57: 9853
• 21 Zhang Y, Li Z, Meng S, Dong A, Yang Y.-W. Chem. Commun. 2022; 58: 649
• 22 Morohashi N, Narumi F, Iki N, Hattori T, Miyano S. Chem. Rev. 2006; 106: 5291
• 23 Vial L, Perret F, Leclaire J. Eur. J. Org. Chem. 2022; e202101274
• 24 Franke J, Vögtle F. Tetrahedron Lett. 1984; 25: 3445
• 25 Tsuchida E, Miyatake K, Yamamoto K, Hay AS. Macromolecules 1998; 31: 6469
• 26 Miyatake K, Yokoi Y, Yamamoto K, Tsuchida E, Hay AS. Macromolecules 1997; 30: 4502
• 27 Baxter I, Williams DJ, Colquhoun HM, Hodge P, Kohnke FH. Chem. Commun. 1998; 1991
• 28 Baxter I, Ben-Haida A, Colquhoun HM, Hodge P, Kohnke FH, Williams DJ. Chem. Eur. J. 2000; 6: 4285
• 29 Ben-Haida A, Colquhoun HM, Hodge P, Raftery J, White AJ. P, Williams DJ. Org. Biomol. Chem. 2009; 7: 5229
• 30 Romero NA, Parker WO, Swager TM. Macromolecules 2019; 52: 8256
• 31 Thiapillar[6]arene (1) In a two-neck 2 L round-bottom flask, isopropanol (1500 mL) was added and sparged thoroughly with Ar over 1 h, after which the solvent was heated to 50 °C. Bisquinone 3 (5.00 g, 10.8 mmol, 1.0 equiv) and 4,4′-thiobisbenzenthiol (2, 2.71 g, 10.8 mmol, 1.0 equiv) were added as fine powders to the solvent in a single portion, after which the reaction was allowed to proceed for 2 h, over which the reaction mixture evolved from a bright orange to an off-white color. The isopropanol was then removed under reduced pressure, leaving a solid residue, which was treated with acetone (500 mL) and filtered to remove insoluble materials. The acetone was then removed under reduced pressure, giving a white solid, which was then heated to reflux in EtOH (100 mL) and allowed to cool overnight at 2–5 °C. The resulting precipitate was collected by filtration and washed with a 2:1 mixture of CHCl₃–hexanes (100 mL) to give the title compound as a white powder (27%, 2.07 g, 2.91 mmol). The compound was stored in a fridge at 2–5 °C in a sealed vial under inert atmosphere to prevent oxidation. ¹H NMR (400 MHz, acetone): δ = 8.15 (s, 4 H,), 7.27 (s, 16 H), 6.72 (s, 4 H). ¹³C NMR (126 MHz, acetone): δ = 150.28, 135.11, 134.91, 132.33, 132.10, 122.16, 119.71. HRMS (ESI-MS) m/z [M + NH₄]⁺ calcd for C₃₆H₂₈NO₄S₆ ⁺: 730.0337; found: 730.0315.
• 32 Compound 4 Sodium hydride (60% in mineral oil, 24 mg, 0.60 mmol, 6.0 equiv) was washed with hexanes (3 × 1 mL) and dried under reduced pressure. Thiapillararene 1 (71 mg, 0.10 mmol, 1.0 equiv) was dissolved in DMF (10 mL) and added dropwise to the sodium hydride at 0 °C and allowed to stir for 15 min. Iodopropane (0.078 mL, 0.80 mmol, 8.0 equiv) was then added dropwise, and the reaction was allowed to stir overnight at room temperature. The next morning, the reaction was quenched by the slow addition of water (15 mL), and the resulting precipitate was collected by filtration and washed with additional water (10 mL) and EtOH (5 mL) and dried under reduced pressure. The residue was purified by flash chromatography (1:1 CHCl₃–hexanes) to give the title compound as a white solid (83%, 73 mg, 0.083 mmol). ¹H NMR (500 MHz, CDCl₃): δ = 7.18 (s, 16 H), 6.59 (s, 4 H), 3.71 (t, J = 6.4 Hz, 8 H), 1.58 (h, J = 7.2 Hz, 8 H), 0.80 (t, J = 7.4 Hz, 12 H). ¹³C NMR (126 MHz, CDCl₃): δ = 151.14, 134.62, 134.13, 131.69, 131.44, 123.60, 115.70, 70.75, 22.55, 10.62. HRMS (ESI-MS): m/z [M + H]⁺ calcd for C₄₈H₄₉O₄S₆ ⁺: 881.1950; found: 881.1909.
• 33 Sulfone 5 Alkyl thiapillararene 4 (200 mg, 0.281 mmol, 1.0 equiv) and NaBO₃·4H₂O (1.29 g, 8.42 mmol, 30 equiv) were dispersed in acetic acid (15 mL) in a microwave vial. The reaction was then heated to 120 °C for 45 min. After cooling to room temperature, the resulting precipitate was dispersed in MeOH (50 mL), collected by vacuum filtration, and washed with water and additional MeOH to give the title compound as a white solid (55%, 166 mg, 0.155 mmol). ¹H NMR (500 MHz, CDCl₃): δ = 8.11 (d, J = 8.5 Hz, 8 H), 7.90 (d, J = 8.5 Hz, 8 H), 7.67 (s, 4 H), 4.04 (t, J = 6.6 Hz, 8 H), 1.86 (h, J = 7.1 Hz, 8 H), 1.04 (t, J = 7.4 Hz, 12 H). ¹³C NMR (126 MHz, CDCl₃): δ = 150.25, 145.56, 144.75, 134.10, 129.94, 127.98, 115.56, 72.78, 22.48, 10.60. HRMS (ESI-MS): m/z [M + Cl]^– calcd for C₄₈H₄₈ClO₁₆S₆ ^–: 1107.0961; found: 1107.0935; m/z [M + HCO₂]^– calcd for C₄₈H₄₈O₁₈S₆ ^–: 1117.1249; found 1117.1220.
• 34 Iki N, Kumagai H, Morohashi N, Ejima K, Hasegawa M, Miyanari S, Miyano S. Tetrahedron Lett. 1998; 39: 7559
• 35 McKillop A, Kemp D. Tetrahedron 1989; 45: 3299
• 36 Bruno NC, Niljianskul N, Buchwald SL. J. Org. Chem. 2014; 79: 4161
• 37 Colquhoun HM, Aldred PL, Kohnke FH, Herbertson PL, Baxter I, Williams DJ. Macromolecules 2002; 35: 1685
• 38 Guo Q.-H, Zhao L, Wang M.-X. Chem. Eur. J. 2016; 22: 6947
• 39 Beppu T, Tomiguchi K, Masuhara A, Pu Y.-J, Katagiri H. Angew. Chem. Int. Ed. 2015; 54: 7332