RSS-Feed abonnieren
DOI: 10.1055/s-0035-1561383
Expanded Chiral Surfaces for Asymmetric Anion–π Catalysis
Publikationsverlauf
Received: 10. Dezember 2015
Accepted after revision: 19. Januar 2016
Publikationsdatum:
03. März 2016 (online)
![](https://www.thieme-connect.de/media/synlett/201607/lookinside/thumbnails/st-2015-b0958-c_10-1055_s-0035-1561383-1.jpg)
Abstract
The insertion of a π-acidic surface of a naphthalenediimide (NDI) between a proline and a glutamate group affords trifunctional catalysts for the stereoselective addition of aldehydes to nitroolefins. In this report, phenyl sulfides are added to this central NDI surface. Oxidation of the sulfide donors into sulfoxide and sulfone acceptors increases both rate and stereoselectivity of the reaction. This dependence on π acidity provides corroborative support that anion–π interactions can contribute to asymmetric catalysis. Non-planar π surfaces around chiral sulfoxide connectors have a profound impact on stereoselectivity. Anti stereoisomers, with phenyl wings pointing in opposite directions from the central NDI surface, perform best in chloroform/methanol mixtures. With stronger anion–π interactions in more hydrophobic aromatic solvents, this trend inverts. Catalysis within π-box binding pockets between the two phenyl wings in syn architectures gives better selectivity under these conditions. The best results are obtained in toluene, whereas competitive π–π interactions with aromatic solvents of varied π acidity reduce the stereoselectivity. Diastereoselectivities up to 96% and enantiomeric excess values up to 91% with expanded surfaces exceed the performance of the original anion–π catalysts with identical chiral architecture (64% ee under identical conditions) and enters into the range of the best conventional catalysts.
Key words
anion–π interactions - enamine chemistry - proline catalysis - asymmetric catalysis - trifunctional catalysis - π surfacesSupporting Information
- Supporting information for this article is available online at http://dx.doi.org/10.1055/s-0035-1561383.
- Supporting Information
-
References and Notes
- 1a Mahlau M, List B. Angew. Chem. Int. Ed. 2013; 52: 518
- 1b Lacour J, Moraleda D. Chem. Commun. 2009; 45: 7073
- 2a Jungbauer SH, Huber SM. J. Am. Chem. Soc. 2015; 137: 12110
- 2b He W, Ge Y.-C, Tan C.-H. Org. Lett. 2014; 16: 3244
- 2c Takeda Y, Hisakuni D, Lin C.-H, Minakata S. Org. Lett. 2015; 17: 318
- 2d Saito M, Tsuji N, Kobayashi Y, Takemoto Y. Org. Lett. 2015; 17: 3000
- 2e Coulembier O, Meyer F, Dubois P. Polym. Chem. 2010; 1: 434
- 2f Priimagi A, Cavallo G, Metrangolo P, Resnati G. Acc. Chem. Res. 2013; 46: 2686
- 2g Gilday LC, Robinson SW, Barendt TA, Langton MJ, Mullaney BR, Beer PB. Chem. Rev. 2015; 115: 7118
- 2h Jentzsch AV, Matile S. J. Am. Chem. Soc. 2013; 135: 5302
- 2i Chudzinski MG, McClary CA, Taylor MS. J. Am. Chem. Soc. 2011; 133: 10559
- 3a Birman VB, Li X. Org. Lett. 2006; 8: 1351
- 3b Beno BR, Yeung K.-S, Bartberger MD, Pennington LD, Meanwell NA. J. Med. Chem. 2015; 58: 4383
- 4a Knowles RR, Lin S, Jacobsen EN. J. Am. Chem. Soc. 2010; 132: 5030
- 4b Zhang Q, Tiefenbacher K. Nat. Chem. 2015; 7: 197
- 4c Yamada S, Fossey JS. Org. Biomol. Chem. 2011; 9: 7275
- 4d Holland MC, Paul S, Schweizer WB, Bergander K, Mück-Lichtenfeld C, Lakhdar S, Mayr H, Gilmour R. Angew. Chem. Int. Ed. 2013; 52: 7967
- 4e Dougherty DA. Acc. Chem. Res. 2013; 46: 885
- 5a Frontera A, Gamez P, Mascal M, Mooibroek TJ, Reedijk J. Angew. Chem. Int. Ed. 2011; 50: 9564
- 5b Wang D.-X, Wang M.-X. Chimia 2011; 65: 939
- 5c Giese M, Albrecht M, Rissanen K. Chem. Rev. 2015; 115: 8867
- 5d Chifotides HT, Dunbar KR. Acc. Chem. Res. 2013; 46: 894
- 5e Ballester P. Acc. Chem. Res. 2013; 46: 874
- 5f Salonen LM, Ellermann M, Diedrich F. Angew. Chem. Int. Ed. 2011; 50: 4808
- 5g He Q, Ao YF, Huang ZT, Wang D.-X. Angew. Chem. Int. Ed. 2015; 54: 11785
- 5h Fujisawa K, Humbert-Droz M, Letrun R, Vauthey E, Wesolowski TA, Sakai N, Matile S. J. Am. Chem. Soc. 2015; 13: 11047
- 5i Wang D.-X, Wang M.-X. J. Am. Chem. Soc. 2013; 135: 892
- 5j Schneebeli ST, Frasconi M, Liu Z, Wu Y, Gardner DM, Strutt NL, Cheng C, Carmieli R, Wasielewski MR, Stoddart JF. Angew. Chem. Int. Ed. 2013; 52: 13100
- 5k Estarellas C, Frontera A, Quiñonero D, Deyà PM. Angew. Chem. Int. Ed. 2011; 50: 415
- 6 Gorteau V, Bollot G, Mareda J, Perez-Velasco A, Matile S. J. Am. Chem. Soc. 2006; 128: 14788
- 7 Vargas Jentzsch A, Hennig A, Mareda J, Matile S. Acc. Chem. Res. 2013; 46: 2791
- 8a Zhao Y, Domoto Y, Orentas E, Beuchat C, Emery D, Mareda J, Sakai N, Matile S. Angew. Chem. Int. Ed. 2013; 52: 9940
- 8b Zhao Y, Beuchat C, Mareda J, Domoto Y, Gajewy J, Wilson A, Sakai N, Matile S. J. Am. Chem. Soc. 2014; 136: 2101
- 9a Zhao Y, Benz S, Sakai N, Matile S. Chem. Sci. 2015; 6: 6219
- 9b Miros FN, Zhao Y, Pupier M, Sargsyan G, Besnard C, Beuchat C, Mareda J, Sakai N, Matile S. Chem. Eur. J. 2016; 22: 2648
- 9c Cotelle Y, Benz S, Avestro A.-J, Ward TR, Sakai N, Matile S. Angew. Chem. Int. Ed., in press; DOI: 10.1002/anie.201600831
- 10 Zhao Y, Cotelle Y, Avestro A.-J, Sakai N, Matile S. J. Am. Chem. Soc. 2015; 137: 11582
- 11 Berkessel A, Das S, Pekel D, Neudörfl JM. Angew. Chem. Int. Ed. 2014; 53: 11660
- 12a Bhosale SV, Jani CH, Langford SJ. Chem. Soc. Rev. 2008; 37: 331
- 12b Sakai N, Mareda J, Vauthey E, Matile S. Chem. Commun. 2010; 46: 4225
- 12c Suraru SL, Würthner F. Angew. Chem. Int. Ed. 2014; 53: 7428
- 12d Das A, Ghosh S. Angew. Chem. Int. Ed. 2014; 53: 2038
- 12e Chong YS, Dial BE, Burns WG, Shimizu KD. Chem. Commun. 2012; 48: 1296
- 12f Ponnuswamy N, Pantoş GD, Smulders MM. J, Sanders JM. K. J. Am. Chem. Soc. 2012; 134: 566
- 12g Gabriel GJ, Iverson BL. J. Am. Chem. Soc. 2002; 124: 15174
- 13 Zhao Y, Huang G, Besnard C, Mareda J, Sakai N, Matile S. Chem. Eur. J. 2015; 21: 6202
- 14a Duschmale J, Wiest J, Wiesner M, Wennemers H. Chem. Sci. 2013; 4: 1312
- 14b Wiesner M, Revell JD, Wennemers H. Angew. Chem. Int. Ed. 2008; 47: 1871
- 15a Marigo M, Wabnitz TC, Fielenbach D, Jørgensen KA. Angew. Chem. Int. Ed. 2005; 44: 794
- 15b Hayashi Y, Gotoh H, Hayashi T, Shoji M. Angew. Chem. Int. Ed. 2005; 44: 4212
- 15c Jensen KL, Dickmeiss G, Jiang H, Albrecht L, Jørgensen KA. Acc. Chem. Res. 2012; 45: 248
- 15d Seebach D, Sun X, Sparr C, Ebert M.-O, Schweizer WB, Beck AK. Helv. Chim. Acta 2012; 95: 1064
- 15e Uehara H, Barbas CF. III. Angew. Chem. Int. Ed. 2009; 48: 9848
-
16 Ogi S, Stepanenko V, Sugiyasu K, Takeuchi M, Würthner F. J. Am. Chem. Soc. 2015; 137: 3300
- 17 Synthesis of Catalysts 8 To a solution of the Boc/t-Bu-protected precursor of 7 (50 mg, 0.048 mmol) in CH2Cl2 (25 mL), mCPBA (23 mg, 0.11 mmol) was added at 0 °C. The mixture was stirred for 7 h at 0 °C. The resulting mixture was subjected to liquid/liquid extraction with aqueous Na2S2O3 (10%, 30 mL), brine (10 mL), dried over Na2SO4 and concentrated in vacuo. Stereoisomers were separated by column chromatography on silica gel [CH2Cl2/EtOAc 3:1; Rf (CH2Cl2/EtOAc 3:1): 0.35 (F1), 0.25 (F3), 0.15 (F2 + F4)] and then by semi-preparative HPLC (CHIRALPAK ID, 250 mm x 10 mm, Daicel, CH2Cl2/isopropanol (90:10), 3 mL/min and detection at λabs = 450 nm). The retention times of the four Boc/t-Bu-protected precursors of isomers (F1)-8, (F2)-8, (F3)-8 and (F4)-8 were 5.1 min, 7.5 min, 20.2 min and 22.5 min, respectively. Deprotection of the pure fractions in TFA (1 mL) and CH2Cl2 (1 mL) for 2 h at r.t. gave the corresponding (Fn)-8 (TFA salts, quantitative) as yellow solids. Catalyst (F3)-8: Mp: decomp. >195 °C. CD (CH2Cl2): 414 (–15.8), 376 (+4.1), 280 (+31.3). IR (neat, cm–1): 3378 (w), 3062 (m), 2928 (m), 2857 (m), 1658 (s), 1555 (m), 1439 (m), 1377 (m), 1304 (m), 1244 (m), 1198 (m), 1175 (m), 1134 (m), 1073 (m), 1032 (m), 830 (w), 793 (m), 747 (m), 720 (m), 686 (m), 637 (m), 582 (w), 565 (w). 1H NMR (400 MHz, CD3OD): δ = 9.59–9.40 (s, 2 H), 7.89–7.69 (m, 4 H), 7.41–7.30 (m, 6 H), 5.63–5.45 (m, 1 H), 4.89–4.80 (m, 2 H), 3.95–3.74 (m, 1 H), 3.17–2.98 (m, 3 H), 2.94–2.81 (m, 1 H), 2.37–2.21 (m, 3 H), 2.09–1.95 (m, 1 H), 1.88–1.64 (m, 6 H), 1.49–1.41 (m, 2 H), 1.36–1.29 (m, 2 H), 1.23–1.14 (m, 8 H), 0.81 (t, 3 J H,H = 6.0 Hz, 3 H). 13C NMR (101 MHz, CD3OD): 174.9 (C), 169.4 (C), 162.7 (C), 161.9 (C), 153.8 (C), 144.7 (C), 131.5 (CH), 129.2 (CH), 129.1 (CH), 127.9 (C), 126.8 (CH), 126.6 (CH), 126.0 (CH), 59.4 (CH), 57.6 (CH), 54.7 (CH), 45.9 (CH2), 39.7 (CH2), 32.5 (CH2), 31.3 (CH2), 30.2 (CH2), 29.8 (CH2), 28.8 (CH2), 27.8 (CH2), 26.3 (CH2), 25.2 (CH2), 24.4 (CH2), 23.5 (CH2), 22.9 (CH2), 22.2 (CH2), 13.0 (CH3). MS (ESI, CH2Cl2/MeOH 1:1 with 0.1% HCOOH): m/z = 922 (100, [M + H]+). HRMS (ESI, +ve): m/z [M + H]+ calcd for C48H51N5O10S2: 922.3150; found: 922.3150.
- 18 Lin N.-T, Vargas Jentzsch A, Guénée L, Neudörfl J.-M, Aziz S, Berkessel A, Orentas E, Sakai N, Matile S. Chem. Sci. 2012; 3: 1121
- 19 Stereoselective Additions of Aldehydes to Nitroolefins Using Catalysts 7–9 Solutions of substrates 1 (1.0 M) and 2 (0.5 M) and catalysts 5, 7–9 (50 mM) were prepared in CDCl3/CD3OD (1:1), benzene-d 6, toluene-d 8, nitrobenzene or 1,3-dimethoxybenzene, and stirred at 20 °C. With increasing reaction time, 1H NMR spectra of aliquots diluted in CDCl3 were recorded (see Figures S4, S5 in the SI). The concentration of product 3 was determined from the integration of pertinent resonances. The concentrations of product 3 were plotted against time, and the initial velocities were determined from the linear fitting (see Figure S6 in the SI). From apparent second-order rate constants, relative rate enhancements k rel and transition-state stabilizations ΔE a were determined. Product mixtures were analyzed by chiral HPLC (Chiralcel AD-H, n-hexane/i-PrOH 99.25:0.75, 0.8 mL/min, 1 mL/min, r.t.; detection: 254 nm, Figure 4; see also Figures S7–S11 in the SI).